Everbilt CSP010 User manual

THANK YOU
We appreciate the trust and confidence you have placed in Everbilt through the purchase of this condensate pump. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Everbilt!
SKU#1000026611
Model#CSP010
USE AND CARE GUIDE
CONDENSATE PUMP
Questions, problems, missing parts? Before returning to the store call
Everbilt Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-844-241-5521
HOMEDEPOT.COM
Rev. 05/20/17

2For Professional Technical Support call 1-844-241-5521
Table of Contents
Table of Contents.......................................................... 2
Performance ..................................................................2
Safety Information......................................................... 2
Warranty.........................................................................3
Pre-Operation................................................................ 4
APPLICATION ...................................................................4
TOOLS REQUIRED .............................................................4
PACKAGE CONTENTS........................................................4
SPECIFICATIONS ..............................................................4
Operation ....................................................................... 5
Troubleshooting............................................................ 7
Performance
SKU HP GPH of Water @ Total Feet Of Lift Max. Lift
0 ft. 5 ft. 10 ft. 15 ft.
1000026611 1/20 132 108 72 24 18 ft.
Safety Information
DANGER: Do not pump flammable or explosive liquids
such as oil, gasoline, kerosene, ethanol, etc. Do not use in
the presence of flammable or explosive vapors. Using this
pump with or near flammable liquids can cause an explosion
or fire, resulting in property damage, serious personal injury,
and/or death.
DANGER: ALWAYS disconnect the power to the pump
before servicing.
WARNING: Release all pressure and drain all water from
the system before servicing any component.
WARNING: Secure the discharge line before starting the
pump. An unsecured discharge line will whip, possibly
causing personal injury, and/or property damage.
WARNING: Extension cords may not deliver sufficient
voltage to the pump motor. Extension cords present a life
threatening safety hazard if the insulation becomes
damaged or the connection ends fall into water. We
recommend the pump be plugged directly into an outlet.
WARNING: Wear safety goggles at all times when working
with pumps.
WARNING: This unit is designed only for use on 115 volts
(single phase), 60 Hz, and is equipped with an approved
3-conductor cord and 3-prong grounded plug. Do not remove
the ground pin under any circumstances. The 3-prong plug
must be directly inserted into a properly installed and
grounded 3-prong, grounding-type receptacle. Do not use
this pump with a 2-prong wall outlet. Replace the 2-prong
outlet with a properly grounded 3-prong receptacle (a GFCI
outlet) installed in accordance with the National Electrical
Code and local codes and ordinances. All wiring should be
performed by a qualified electrician.
WARNING: Protect the electrical cord from sharp objects,
hot surfaces, oil, and chemicals. Avoid kinking the cord. Do
not use damaged or worn cords.
WARNING: Failure to comply with the instruction and
designed operation of this unit may void the warranty.
ATTEMPTING TO USE ADAMAGED PUMP can result in
property damage, serious personal injury, and/or death.
WARNING: Ensure that the electrical circuit to the pump is
protected by a 10 Amp fuse or circuit breaker.
.
CAUTION: Do not lift the pump by the power cord.

3For Professional Technical Support call 1-844-241-5521
Safety Information (continued)
CAUTION: Know the pump and its applications,
limitations, and potential hazards.
CAUTION: Follow all local electrical and safety codes,
along with the National Electrical Code (NEC). In addition, all
Occupational Safety and Health Administration (OSHA)
guidelines must be followed.
IMPORTANT: The motor of this pump has a thermal
protector that will trip if the motor becomes too hot. The
protector will reset itself once the motor cools down and an
acceptable temperature has been reached. The pump may
start unexpectedly if it is plugged in.
IMPORTANT: Ensure the electrical power source is
adequate for the requirements of the pump.
IMPORTANT: Before using the pump, check the tubing for
holes or excess wear, which could cause leaks, and ensure
the tubing is not kinked or making sharp angles. Straight
tubing allows the pump to move the greatest amount of
water quickly, and also check that all tubing connections are
tight to minimize leaks.
IMPORTANT: This pump is made of high-strength,
corrosion-resistant materials. It will provide trouble-free
service for a long time when properly installed, maintained,
and used. Please carefully read the manual and follow the
instructions regarding common pump problems and
remedies.
IMPORTANT: This pump is fully automatic in operation.
The float switch controls the pump’s “ON” and “OFF”.
The manufacturer warrants the products to be free from defects in materials and workmanship for a period of two years from date of
purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If within two
years this product is found upon examination by the manufacturer to be defective in materials or workmanship , the manufacturer’s only
obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the
product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling. Your original receipt of
purchase is required to determine warranty eligibility.
The purchaser must pay all labor and shipping charges necessary to replace the product covered by this warranty.
This Limited Warranty does not cover products which have been damaged as a result of an accident, misuse, abuse, negligence, alteration,
improper installation or maintenance, or failure to operate in accordance with the instructions supplied with the products, or operational
failures caused by corrosion, rust, or other foreign materials in the system.
Requests for service under this warranty shall be made by returning the defective product to the manufacturer as soon as possible after the
discovery of any alleged defect. The manufacturer will subsequently take corrective action as promptly as reasonably possible.
The manufacturer does not warrant and especially disclaims any warranty, whether express or implied, of fitness for a particular purpose,
other than the warranty contained herein. This is the exclusive remedy and any liability for any and all indirect or consequential damages or
expenses whatsoever is excluded.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty
lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
For Professional Technical Support call 1-844-241-5521 or visit HOMEDEPOT.COM.
For warranty registration please go to www.gppumpsus.com
Warranty

4For Professional Technical Support call 1-844-241-5521
Pre-Operation
APPLICATION
This non-submersible utility pump is designed for condensate removal applications. Pump water only with this pump.
This pump has not been tested or approved for use in swimming pools or in salt-water marine areas. This pump is not designed to
function as a permanently installed sump pump. It is also not engineered to run continuously as a “fountain” or “waterfall” pump.
Do not use where water recirculates.
Not designed for the drains of swimming pools.
FEATURES
Operating water depth: minimum, 2-1/4 in.
TOOLS REQUIRED
PACKAGE CONTENTS
Part Description
A Pump
B 3/8 in.(ID)clear tubing
SPECIFICATIONS
Power supply 115V, 60 HZ., 10 Amp Circuit
Liquid Temp. Range 32°F to 95°F(0°-35°C)
Discharge 3/8 in. hose barb
Safety Goggles
Phillips
Screwdriver
Flathead
Screwdriver

5For Professional Technical Support call 1-844-241-5521
Operation
NOTE:This unit is non-submersible. The pump should not be installed in a manner that will subject it to flooding, splashing or spraying.
1 Mounting the pump 2
Connecting the air conditioning
condensate drain tubing
The tank has two slots (1) provided to mount the unit. The slots
are located on the back of the tank. Mount the unit either on the
side of the air conditioner unit or nearby wall.
The pump must be level and the inlet must be below the coil
drain. Conduit fittings are not compatible with the plastic pump
housing.
Ensure the tubing to the pump intake is fastened securely so that
it cannot come out of the pump intake port.
Cut the tubing at an angle so that the bottom of the reservoir
does not close the tubing outlet. Be sure the tubing does not
interfere with the float.
3
Connecting the tubing 4Plugging in the pump
Connect the tubing from the pump discharge hose barb to the
floor drain, laundry tub, or sink. Leave an air gap above the tub
drain.
Plug the pump power cord into a 115 volt properly grounded
power outlet.

6For Professional Technical Support call 1-844-241-5521
Operation (continued)
SAFETY SWITCH
The safety switch is designed to activate an alarm (sold separately) or to cut off power in the event of high water in the condensate
reservoir.
To control a thermostatic circuit the COM and NO connections from the safety switch are to be wired in series with the low voltage
thermostat circuit to shut down the heating/AC circuit. The COM and NC switch contacts may be used to actuate a low voltage alarm circuit
(connected in series) if the heating/cooling system cannot be disrupted.
TESTING
1. Unplug the condensate pump so that it cannot pump out water. Fill water into the pump reservoir until it is almost full. The safety switch
should activate before the float contacts the cover.
2. Plug in the condensate pump. The float should activate the pump and pump the water out.
As the water level goes down in the reservoir, the safety switch should reset, allowing the appliance to start or shut off the alarm.

7For Professional Technical Support call 1-844-241-5521
Troubleshooting
Problem Cause Corrective Action
The pump does not
start
1. The house fuse is blown.
2. The breaker is tripped.
3. The plug is disconnected.
4. The plug is corroded.
5. The float is stuck.
6. Open circuit
1. If blown, replace with a fuse of proper size.
2. Reset the breaker.
3. Secure the plug.
4. Clean the plug prongs.
5. Clean the reservoir and ensure the float moves freely.
6. Have certified electrician check fuse circuit.
The pump is unable
to pump out water
1. The tubing is kinked, bent sharply, or coiled.
2. The tubing length is too long.
3. The float is sticking.
4. The discharge height is greater than 18 feet.
5. Obstruction in discharge tubing.
6. Blocked check valve.
1. Straighten the tubing.
2. Shorten the discharge tubing.
3. Clean any debris from reservoir.
4. Measure the height from the pump to the highest point.
Rework discharge if greater than 18'.
5. Check line for blockage and remove any debris.
6. Remove any debris around check valve.
Liquid is draining
back into reservoir
from discharge line.
1. Damaged check valve.
2. Blockage in check valve,
1. Contact Everbilt
2. Clear any debris away from check valve.
Liquid is leaking
around check valve.
1. Check valve is to loose or fastened to tight.
2. Damaged O-ring.
1. Check valve should be hand-tightened.
2. Contact Everbilt customer service for replacement.
My air conditioner is
not blowing cool air
1. Check safety switch on condensate pump to
see if activated.
1. Check blockage in drainage tube, or replace condensate pump.

Questions, problems, missing parts? Before returning to the store call
Everbilt Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-844-241-5521
HOMEDEPOT.COM