EverFocus EHD650 User manual

EVERFOCUS
1/3” Wide-Dynamic
True D/N Rugged Dome Color Camera
Operation Instructions
Model No. EHD650
Please read this manual first for correct installation and operation. This manual should be retained
for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are therefore
subject to change without notice.
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,
audio speakers since the magnetic fields generate from above devices will distort the video
image.
2. Never disassemble the camera nor put impurities in it.
Disassembly or impurities may result in trouble or fire.
3. Never face the camera toward the sun.
Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.
4. Keep the power cord away from wet and never touch the power cord with wet hands.
Touching the wet power cord with hands or touching the power cord with wet hands may
result in electric shock.
5. Never install the camera in areas exposed to water, oil or gas.
Water, oil or gas may result in failure, electric shock or file.
6. Cleaning
Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from
the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor
and the camera lens.
7. Do not operate the camera beyond the specified temperature, humidity or power source
ratings.
Use the camera at temperatures within -40℃~ 50℃(-40℉~122℉)and humidity between
20%~80%. The input power source is 24VAC .

- 2 -
TABLE OF CONTENTS
1. PRODUCT OVERVIEW........................................................................................................................... 3
1.1 MAIN FEATURES........................................................................................................................................ 3
1.2 PACKAGE CONTENTS................................................................................................................................. 4
1.3 SPECIFICATIONS ........................................................................................................................................ 5
1.4 DIMENSIONS............................................................................................................................................... 6
1.5 HARDWARE OVERVIEW............................................................................................................................. 7
2. INSTALLATION........................................................................................................................................ 8
2.1 INSTRUCTION FOR ROTATINGTHE CAMERAMOUNTING.......................................................................... 9
2.2 MOUNTING CAMERAS ON THE CEILING/WALL ..................................................................................... 10
2.3 CONDUIT CABLEAND CONNECT POWER AND VIDEO .............................................................................11
2.4ADJUST LENS ZOOM AND FOCUS AND VIEW ........................................................................................... 14
3. HOW TO CONTROL OSD MENU........................................................................................................ 15
3.1 WHERE IS OSD CONTROLLER............................................................................................................ 15
3.2 GENERAL OPERATION INSTRUCTION..................................................................................................... 15
4. MAIN MENU ........................................................................................................................................... 17
4.1 SETUP ID.................................................................................................................................................. 17
4.2 LENS......................................................................................................................................................... 18
4.3WDR (WIDE DYNAMIC RANGE)............................................................................................................. 19
4.4WB CONTROL.......................................................................................................................................... 19
4. 5AGC ........................................................................................................................................................ 20
4.6 LOW LIGHT.............................................................................................................................................. 21
4.7 SYNC....................................................................................................................................................... 22
4.8 DAY/NIGHT .............................................................................................................................................. 23
4.9 EXIT MENU .............................................................................................................................................. 23

- 3 -
1. PRODUCT OVERVIEW
The most technically advanced EHD650 is the newest vandal-resistant Color
Rugged Dome Camera from EverFocus Electronics. The Color Rugged Dome
Camera can withstand a blow from a 10-pound sledgehammer and has a built-in
heater that allows for operation in low temperatures. It is perfect for all
high-profile crime-prone applications such as building, entrances, retail stores, and
shopping malls. The EHD650 is unquestionably one of the world's toughest
cameras and is your best choice for vandal resistance.
1.1 Main Features
1/3” Color Digital Pixel System (DPS) sensor
Each pixel is processed independently to get clear and usable images
High resolution: Over 480 horizontal TVL
Superior Wide Dynamic Image Quality
Film-like colors are described under various light conditions even in high
dynamic range scenes. Dynamic Range is greater than 120dB.(max)
True Day Night function:
True day/night by moving OLPF and glass. Converts to B/W mode when
lightislow
OSD function control
Vandal proof
Vari-focal lens for auto iris control
Line Lock mode
Polycarbonate shell withstand the impact of 10 pounds sledgehammer, smoke
color or clear as option
Aluminum die-casting base, smoke color or clear as option
Unique security screw locked
Operating temperature -40℃~ 50℃(-40℉~122℉)
Heater triggered when temperature less than 10℃(50℉)

- 4 -
1.2 Package Contents
zCamera Unit x 1
zMounting Accessory includes:
-Screws x 4
-Expanding Screws x 4
-Wrench x 1
zWeather-proof Conduit x 1
zExtension Power Cable and Video cable x 1
zExtension Power Cable x 1
zDesiccant Pack x 1
zManual x 1
OPTIONALACCESSORIES
zWall Mount Bracket (BA-EHD)
zEN220 5.6-inch LCD Test Monitor

- 5 -
1.3 Specifications
Pickup Device 1/3'' DPS Wide Dynamic range sensor
Video Format NTSC or PAL
Scanning System NTSC: 525 TV lines, 60 fields/sec
PAL: 625 TV lines, 50 fields/sec.
Picture Elements 720(H) X 540(V)
Horizontal Resolution 480TVL
Sensitivity 0.08Lux/F=1.2 (DSS x 32)
S/N Ratio Over 48dB
Electronic Shutter 1/50(1/60)~1/100,000
Lens Type
Vari-focal lens, Auto Iris
f=2.9~10mm
f=9~22mm
*Lens models and availability vary in different
regions
OSD Menu Yes
Back Light Comp. Yes
Auto Gain Control Yes
Auto White Balance Yes
Flickerless Yes
Slow Shutter Up to 32x (2, 4, 8, 16, 32)
Dynamic Range 95dB typical, 120dB max
Gamma Correction 0.45
Video Output BNC 1.0Vp-p , 75ohm
Sync. Mode Line Lock/Internal Sync
Weatherproof IP66
Vandal Resistant Yes
Heater Yes, built-in
Power Source 24VAC
Power Consumption 24VAC: 6VA max. (heater OFF)
24VAC: 20.5W max. (heater ON)
Dimensions 130mm(W) x 98.9mm(H) x 130mm(D);
5.1"(W) x 3.9"(H) x 5.1"(D)
Weight 1 kg ; 2.2 lbs
Operating Temperature -40°C~50°C ; -40°F~122°F (20%~80% Humidity)
Certifications FCC/CE

- 6 -
1.4 Dimensions
a.
b.

- 7 -
1.5 Hardware Overview
Conduit plug setscrew
Side conduit hole
Back conduit hole
Mounting Setscrew
Mounting Setscrew
Mounting Setscrew
Mounting Setscrew
OSD mini-joystick Controller
Camera Module

- 8 -
2. INSTALLATION
This section covers simple steps and detail installation. Please follow instruction for
preventing any unnecessary damage.
Simple Steps:
1. Open camera cover.
2. Rotate camera if install on ceiling
3. Drill holes on wall/ceiling. Mount cameras.
4. Connect power and video.
5. Optional connect to EN220 Test Monitor for field testing (monitor is not
included).
6. Adjust lens and camera position.
7. Adjust camera setting by using the OSD controller.
8. Put in DESICCANT PACK and close the camera cover for avoiding moisture in
the camera.
Detail Installation Steps:
1. Loosen the 4 fix screws on the housing cover by using the attached wrench (Figure
1). Please pay attention not to damage the lens.
2. Remove the camera
Figure 1
Locking Screws
Vari-Focal Lens
Heater
Figure 2

- 9 -
To remove the camera, first unplug the wire connection on the back of the camera.
Then loosen the 2 locking screws on the camera base, push the camera base to the right
(toward heater direction, as shown in Figure 2), remove the camera from the mounting
base. Reinstall the camera and the cable while the base mounting is completed.
2.1 Instruction for rotating the camera mounting
a. Please unscrew fixing screws that hold the camera module.
b. Remove the camera
c. Aim “ Ceiling” Mark to “S” mark on camera lead frame. See figure
3-3.
“S” mark.
Figure 3-3
Figure 3-1
Figure 3-2

- 10 -
d. Tighten fixing screws and finished
2.2 Mounting Cameras on the Ceiling/Wall
a. Mount the base to the wall or ceiling, fix the base by the 4 screws in the
accessory pack.(see dimension b for drilling dimension). This dome is
weighted 1.7kg, please make sure if the mounting is strengthened enough to
support it, if not, please reinforce the mounting according to the
environment. See figure 4.
Back conduit hole
Mounting Setscrew
Mounting Setscrew
Mounting Setscrew
Mounting Setscrew
Figure 4
Figure 3-4