EverFocus EPA6220 User manual

EPA6220 / EPA6236
AHD 1080p IR / IP66 Outdoor Speed Dome
True Day/Night and WDR (20x / 36x Optical Zoom)
Quick Installation Guide
Copyright © EverFocus Electronics Corp.
Release Date: May, 2020
Disclaimer
All the images including product pictures or screen shots in this document are for example only. The
images may vary depending on the product and software version. Information contained in this document
is subject to change without notice.
Copyright
All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form
or by any means without written permission of the EverFocus Electronics Corporation.

1
1. Introduction
The EPA6220 / EPA6236 1080p speed dome cameras come with 20x / 36x optical zoom lens respectively.
Equipped with a weather-resistant (IP66) housing, the models meet a wide variety of needs for outdoor
surveillance. The speed dome cameras support AHD, TVI, CVI and CVBS video formats, which are
switchable via shortcut commends (please refer to Appendix A Shortcut Commands in the User’s Manual).
EPA6220 / EPA6236 provides variable pan / tilt speeds for fast and accurate monitoring. A maximum of 220
preset points can be configured for precise location of target areas. Features like A-B scan, 4 patterns, 8
tours are all provided. The speed dome cameras also feature IR-Cut Filter, which can be removed or
attached manually or automatically switched based on the detected light levels. A built-in fan and heater
are also equipped in the speed dome camera.
1.1 Features
AHD 1080p Sony CMOS sensor
20x optical zoom lens (for EPA6220) / 36x optical zoom lens (for EPA6236)
Supports UTC & RS-485 communication
True Day and Night (IR-cut filter removable)
Supports D-WDR
Supports 220 preset positions
Supports 8 tours (16 positions each tour)
IP66-rated with metal housing
Supports OSD menu
1.2 Dimensions
100mm / 3.9"
155mm / 6.1"
350mm / 13.8"
227mm / 8.94"
177mm / 6.97"
215mm / 8.46"
122mm / 4.8"

2
1.3 Packing List
1. Speed Dome Camera x 1
2. Wall Mount Bracket x 1
3. Power Supply (12VDC, 4A) x 1
4. Screw Kit x 1
5. Quick Installation Guide x 1
Note:
1. Equipment configurations
and supplied accessories vary by country. Please consult your local
EverFocus office or agents for more information. Please also keep the shipping carton for possible
future use.
2. Contact the shipper if any items appear to have been damaged in the shipping process.
1.4 Optional Accessories
•Pole Mount Bracket •Corner Mount Bracket
•Pendant Mount Bracket •EKB700 Keyboard (RS-485)

3
2. Installation
2.1 Wall Mounting
You can use the supplied Wall Mount Bracket to install the speed dome camera to the concrete wall.
Note that the wall should be withstood at least 4 times the weight of the speed dome camera.
Wall Mount Bracket
1. Mark the 4 screw holes on the wall based on the Wall Mount Bracket and then drill 4 screw-depth
holes on the wall.
2. Run the cables through the Wall Mount Bracket and then screw the Wall Mount Bracket to the wall
with M8 screws.
3. Screw the speed dome camera to the Wall Mount Bracket.

4
2.2 Corner Mounting
You can purchase the Corner Mount Bracket (please refer to 1.4 Optional Accessories) to install the speed
dome camera to the concrete corner wall with 90°angle. Note that the wall should be withstood at least 4
times the weight of the speed dome camera.
Corner Mount Bracket
1. Mark the screw holes on the wall based on the Corner Mount Bracket, drill the screw-depth holes
and then screw the Corner Mount Bracket to the wall with M8 screws and screw nuts.
2. Run the cables through the Wall Mount Bracket and Corner Mount Bracket, and then screw the Wall
Mount Bracket to the Corner Mount Bracket.
3. Screw the speed dome camera to the Wall Mount Bracket.

5
2.3 Pole Mounting
You can purchase the Pole Mount Bracket (please refer to 1.4 Optional Accessories) to install the speed
dome camera to a pole structure with diameter between 130-152mm (max. 6 inches). Note that the pole
structure should be withstood at least 4 times the weight of the speed dome camera.
Pole Mount Bracket
1. Fix the Pole Mount Bracket to the pole structure using the Stainless Hose Clamps (φ130-152mm).
2. Run the cables through the Wall Mount Bracket and Pole Mount Bracket, and then screw the Wall
Mount Bracket to the Pole Mount Bracket.
3. Screw the speed dome camera to the Wall Mount Bracket.

6
2.4 Ceiling Mounting
You can purchase the Ceiling Mount Bracket (please refer to 1.4 Optional Accessories) to install the speed
dome camera to the ceiling. Note that the ceiling should be withstood at least 4 times the weight of the
speed dome camera.
Ceiling Mount Bracket
1. Unscrew the M4 screws to remove the Bracket Base from the Ceiling Mount Bracket. Mark the
screw holes on the ceiling based on the Bracket Base, drill the screw-depth holes and then screw the
Bracket Base to the ceiling with M6 screws. You can optionally apply the silica gel to the faying
surface between the Bracket Base and ceiling for water proofing.
2. Run the cables through the Ceiling Mount Bracket, and then screw the Ceiling Mount Bracket to the
Bracket Base. You can optionally apply the silica gel to the joint sleeve for water proofing.
3. Screw the speed dome camera to the Ceiling Mount Bracket.

7
EverFocus Electronics Corp.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd.,
Shenkeng Dist., New Taipei City 222, Taiwan
TEL: [phone]
FAX: [phone]
www.everfocus.com.tw
[email protected]m.tw
EverFocus China - Shenzhen:
4F, No. 2, D4 Building, Wan Yelong
Industrial Park, Tangtou Road, Shiyan,
Baoan, Shenzhen, Guangdong 518101, China
TEL: [phone]
FAX: [phone]
www.everfocus.com.cn
[email protected]m.cn
EverFocus USA - California:
1801 Highland Avenue, Unit A, Duarte,
CA 91010, USA
TEL: [phone]
FAX: [phone]
www.everfocus.com
[e-mail]
EverFocus Japan:
3F, Kuramochi, Building II
2-2-3 Koto-Bashi, Sumida-Ku,
Tokyo, 130-0022, Japan
TEL: [phone]
FAX: [phone]
www.everfocus.co.jp
[email protected]
Your EverFocus product is designed
and manufactured with high quality
materials and components which can
be recycled and reused.
This symbol means that electrical and
electronic equipment, at their
end-of-life, should be disposed of
separately from your household
waste.
Please, dispose of this equipment at
your local community waste
collection/recycling centre.
In the European Union there are
separate collection systems for used
electrical and electronic product.
Please, help us to conserve the
environment we live in!
Ihr EverFocus Produkt wurde entwickelt
und hergestellt mit qualitativ
hochwertigen Materialien und
Komponenten, die recycelt und wieder
verwendet werden können.
Dieses Symbol bedeutet, dass
elektrische und elektronische Geräte am
Ende ihrer Nutzungsdauer vom
Hausmüll getrennt entsorgt werden
sollen.
Bitte entsorgen Sie dieses Gerät bei
Ihrer örtlichen kommunalen
Sammelstelle oder im Recycling Centre.
Helfen Sie uns bitte, die Umwelt zu
erhalten, in der wir leben!