EverFocus EHA2880 eZ.HD Series User manual

EHA2880 eZ.HD Series
8MP IP66 IR Dome Camera
User’s Manual
Copyright © EverFocus Electronics Corp.
Release Date: September, 2019
All the images including product pictures or screen shots in this document are for example
only. The images may vary depending on the product and software version. Information
contained in this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: [phone] FAX: [phone] www.everfocus.com.tw

1. Introduction
Equipped with a 8MP CMOS sensor, the EverFocus eZ.HD series cameras –
EHA2880 deliver 8MP image quality. The model provides motorized 3.6-11mm
lens with ICR. Featured with True Wide Dynamic Range (T-WDR), the camera can
provide clear images even under backlight circumstances where intensity of
illumination can vary excessively. The EHA2880 supports both NTSC and PAL
scanning systems (auto detection) and is IP66 certified.
1.1 Packing List
Camera x 1
Mounting Sticker x 1
L-Type Wrench x 1
Screw & Screw Anchor x 4
Desiccant Bag x 1
User Manual x 1
1.2 Features
8MP CMOS sensor, delivering amazing high sensitivity
Motorized 3.6-11mm lens with ICR to capture the desired field of view
Extended IR range of up to 30m / 98ft. with 4 LEDs (depends on scene IR
reflectivity)
T-WDR to improve the visibility under high contrast scene
3-Axis rotation design allows wall or ceiling mounting
IP66-rated with metal housing
Supports UTC function: Control camera OSD settings directly from DVR end
1.3 Dimensions
142mm / 5.59"
142mm / 5.59"

2
1.4 Optional Accessory
Type
Wall Mount Bracket
Image
Model
BA-EB45
BA-EB28
BA-EB18
Color
White / Metal
White / Metal
White / Metal
Size
(WxDxH)
245x160x163mm
9.65”x6.3”x6.42”
140x136x233mm
5.51”x5.35”x9.17”
120x207x134mm
4.72”x8.15”x5.28”
Weight
2.1kg / 4.63lb
2.1kg / 4.63lb
1.1kg / 2.43lb
Type
Ceiling Mount Bracket
Image
Model
BA-EB3A
BA-EB3B
Color
White / Metal
White / Metal
Size
(WxDxH)
136x136x243mm
5.35”x5.35”x9.57”
136x136x443mm
5.35”x5.35”x17.44”
Weight 2.4kg / 5.29lb 3.6kg / 7.94lb
1.5 Cable Description
12VDC Power Cable
Video Output Cable (BNC, 75Ohm)
2. Installation
1. Stick the supplied Mounting Sticker to the surface to mark the 4 screw
positions. Drill four holes on the surface and insert the supplied 4 Screw
Anchors into the screw holes. If you want to run the cable through the
surface, drill a hole within the 4 screw area.

3
2. To mount the camera to the surface:
a. Remove the Base Plate from the camera. To do so, 1) Remove the Fix
Screw 2) Slightly push the Base Plate backward from the Fix Screw side
and then pull out the Base Plate.
Fix Screw
Base Plate
Push
Pull
b. Screw the Base Plate to the surface using the supplied 4 Screws.
Screws
Base Plate
c. Open the Camera Cover to remove the old desiccant bag from the Camera
Body and stick the supplied Desiccant Bag inside the Camera Body. It’s
highly recommended to replace the desiccant bag every time when you
open the Camera Cover.
d. Attach the Camera Body to the Base Plate and then screw back the Fix
Screw.
Note: Please screw back the Camera
Cover immediately in case of reducing
the absorption capacity of the desiccant
bag inside the camera body.

4
Base Plate
Camera Body
Fix Screw
3. Connect the Power Cable to a 12VDCpower source. Connect the Video
Output Cable to a monitor or DVR.
4. You can use the Joystick on the cable to configure camera OSD settings.
Remove the Protection Cap from the Joystick before using it.
UP
DN
Configuring OSD Settings:
•Push the Joystick up / down to select among
menu items.
•Push the Joystick left / right to adjust the level of
the selected item.
•Press the Joystick to enter the submenu or exit
the OSD Setup Menu.
5. You can optionally adjust the camera angles. To do so, unscrew the 4 cover
screws using the supplied L-Type Wrench and then remove the cover. Adjust
the camera angles (Tilt: 60°, Pan: 350°, Rotate: 350°). After adjusting camera
angles, screw back the camera cover.
350°
350°
60°

5
3. Configuration in the OSD Menu
No
Main
Sub Menu
Sub Menu / Function
1 Motorized
AF Mode
One Shot, Manual
D&N Filter
Sync On, Sync Off
Initial
On
2 Exposure
Brightness
0-20
Shutter
Auto
Mode
Normal / Deblur
Manual Speed
1/30, 1/60, 1/120, 1/250,
1/500, 1/1000, 1/2000,
1/4000, 1/8000, 1/15000,
1/30000
Flicker
Sens-Up
Not supported
AGC
0-10
3 Backlight
HLC
Level
0-20
Color
YEL, CYN, GRN, MAG, RED, BLU, BLK,
WHT
BLC
H-POS
0-38
V-POS
0-35
H-SIZE
0-38
V-SIZE
0-35
WDR
WDR Mode
Line
ROI Mode
Box
Window Zone
0-3
Window Use
On, Off
H-POS
0-3856
V-POS
0-2176
H-SIZE
0-3856
V-SIZE
0-2176
Polygon
Window Zone
0-3
Window Use
On, Off
POS0-X
0-935
POS0-Y
0-361
POS1-X
0-935
POS1-Y
0-361
POS2-X
0-935
POS2-Y
0-361
POS3-X
0-935
POS3-Y
0-361
Off
Weight
High, Middle, Low
Off
4 Day/Night Mode
Auto
IR LED
Adaptive, Off
Anti-Sat.
0-20
D>N Thres
0-20
N>D Thres
0-20
Delay
High, Middle, Low
Color
B/W
IR LED
Adaptive, Off
Anti-Sat.
0-20
D>N Thres
0-20

6
N>D Thres
0-20
Delay
High, Middle, Low
Extern
IR LED
Adaptive, Off
Anti-Sat.
0-20
Extern SW
High, Low
D>N Thres
0-20
N>D Thres
0-20
Delay
High, Middle, Low
5 Color AWB
Auto
Autoext
Preset
Manual
C-Temp
3000K, 5000K, 8000K
R-Gain
0-20
B-Gain
0-20
Color Gain
0-20
6
DNR
High, Middle, Low, Off
7 Image
Sharpness
0-10
Gamma
0.45, 0.55, 0.65, 0.75
Mirror
On, Off
Flip
On, Off
D-Zoom
Not supported
ACE
High, Middle, Low
Defog On
Mode
Auto, Manual
Level
High, Middle, Low
Off
Shading
On
Weight
0%-100%
Off
Privacy
Box On
Zone Num
0-15
Zone Disp
On, Off
H-POS
0-120
V-POS
0-68
H-Size
0-80
V-Size
0-61
Y Level
0-20
CB Level
0-20
CR Level
0-20
Trans
0-3
Off
Polygon On
Zone Num
0-7
Zone Disp
On, Off
POS0-X
0-240
POS0-Y
0-136
POS1-X
0-240
POS1-Y
0-136
POS2-X
0-240
POS2-Y
0-136
POS3-X
0-240
POS3-Y
0-136
Y Level
0-20
CB Level
0-20
CR Level
0-20

7
Trans
0-3
Off
8 Motion On
Det Window
Window Use
0-3
Window Zone
On, Off
Det H-POS
0-96
Det V-POS
0-56
Det H-Size
0-96
Det V-Size
0-56
Sensitivity
0-10
Motion OSD
On, Off
Text Alarm
On, Off
Signal Out
On, Off
Off
9 System
Output
Frame Rate
4K/15fps, 4MP/30fps, 1080p/30fps
Freq
60Hz (Auto Detection)
SDI Mode
Not supported
SDI UCC Stop
Not supported
Analog Mode
AHD, TVI, CVI, CVBS
Confirm
Yes
Return
Image Range
Full
Comp
User
Offset
0-32
Color Space
HD-CbCr, SD-CbCr, YUV
Audio Mic
Not supported
Color Bar
On, Off
Language
ENG, CHN, CHN(S), JPN, KOR, POR
Cam Title
Left-Down
Right-Up
Off
Reset
On
10
Exit