Everlight 18-225/B6R6C-C01/3T Instruction Manual

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 1 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo
Technical Data Sheet
Chip LED with Bi-Color(Multi-Color)
18-225/B6R6C-C01/3T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Multi-Color type.
․Pb-free.
․The product itself will remain within RoHS
compliant version.
Descriptions
․The 18-225 SMD LED is much smaller than lead
frame type components, thus enable smaller board
size, higher packing density, reduced storage space
and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip Resin Color
Type Material Emitted Color
B6 InGaN Blue Water Clear
R6 AlGaInP Brilliant Red

18-225/B6R6C-C01/3T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 2 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo
Package Outline Dimensions
-+
-+
Cathode Mark
1
2
Polarity
Recommend Soldering Pad
Red
Blue
0.8
1.6
0.4 0.8 0.4
0.320.32
0.15
0.5
4
3
0.5 0.7 0.5
0.4
0.3
1
2
4
3
2
1
3
4
0.4
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Blue
Red

18-225/B6R6C-C01/3T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 3 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo
Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol Rating Unit
Reverse Voltage VR5 V
Forward Current IFB6:25
R6:25 mA
Peak Forward Current
(Duty 1/10 @1KHz) IFP B6:100 R6:60 mA
Power Dissipation Pd B6:110
R6:60 mW
Electrostatic Discharge(HBM) ESD B6:150
R6:2000 V
Operating Temperature Topr -40 ~ +85 ℃
Storage Temperature Tstg -40 ~ +90 ℃
Soldering Temperature Tsol Reflow Soldering : 260 ℃for 10 sec.
Hand Soldering : 350 ℃for 3 sec.

18-225/B6R6C-C01/3T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 4 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo
Electro-Optical Characteristics (Ta=25℃)
Parameter Symbol Min. Typ. Max. Unit Condition
Luminous Intensity Iv B6
R6
18.0
18.0
28.5
28.5 ----- mcd IF=5mA
Viewing Angle 2θ1/2 ----- 120 ----- deg IF=5mA
Peak Wavelength λp B6
R6 ----- 468 632 ----- nm IF=5mA
Dominant Wavelength λd B6
R6 ----- 470
624 ----- nm IF=5mA
Spectrum Radiation
Bandwidth △λ B6
R6 ----- 35
20 ----- nm IF=5mA
Forward Voltage VFB6
R6 2.7
1.7 3.3 2.0 3.7 2.4 VIF=5mA
Reverse Current IRB6
R6 ----- ----- 50
10 μAVR=5V

18-225/B6R6C-C01/3T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 5 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo
Typical Electro-Optical Characteristics Curves
B6
25
0
50
75
100 Ta=25°C
Forward Voltage V (V)
Relative luminous intensity (%)
-60
Forward Current Derating Curve
Ambient Temperature Ta (°C)
Forward Current F
I (mA)
1
10
-20-40 0 20 60 40 10080
Relative luminous intensity (%)
100
1000
Forward Current
Wavelength λ(nm)
Luminous Intensity vs.
Ambient Temperature
I (mA)
F
Spectrum Distribution Forward Voltage
F
Ta=25°C
Forward Current vs.
10
Relative luminous intensity (%)
1
10
100
Forward Current I (mA)
10 10
F
Ta=25°C
Luminous Intensity vs.
Forward Current
30°
20°
Ta=25°C
10°0°
Radiation Diagram
40°
60°
50°
90°
80°
0.6
70°
0.20.10.5 0.3 0.4
1.0
0.8
0.9
0.7
Ambient Temperature Ta (°C)
400 550
450 500 600 2.6
0
10
25
20
40
30
50
4.23.43.0 3.8 4.5
1000
Duty=1/10
f=1KHz
12
0
10
0
20
30
25
40
50
40
20 60 10085

18-225/B6R6C-C01/3T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 6 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo
Typical Electro-Optical Characteristics Curves
R6
Relative luminous intensity (%)
Ambient Temperature Ta (°C)
Ambient Temperature Ta (°C)
Ta=25°C
Radiation Diagram
Forward Current
Luminous Intensity vs.
Ta=25°C
F
Forward Voltage V (V)
Ta=25°C
Forward Voltage
Forward Current vs.
Wavelength λ(nm)
Ta=25°C
Spectrum Distribution
F
I (mA)
Forward Current
()%
Relative luminous intensity
Ambient Temperature
Luminous Intensity vs.
()
%
I (mA)
F
Forward Current
Forward Current Derating Curve
Relative luminous intensity

18-225/B6R6C-C01/3T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 7 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo
Label Explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
RoHS
Pb
CPN :
PN : XXXXXXXXXXXXX
XXXXXXXXXXXXX
QTY : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
CAT : XXX
HUE : XXX
REF : XXX
EVERLIGHT
MADE IN TAIWAN

18-225/B6R6C-C01/3T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 8 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
-
+
-
+
Note: The tolerances unless mentioned is ±0.1mm,Unit = mm
Moisture Resistant Packaging
Label Desiccant Label
Aluminum moisture-proof bag

18-225/B6R6C-C01/3T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 9 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
No. Items Test Condition
Test
Hours/Cycles Sample Size Ac/Re
1 Reflow Soldering
Temp. : 260℃±5℃
Max. 10sec. 6 Min. 22 PCS. 0/1
2 Temperature Cycle
H : +100℃15min
∫5 min
L : -40℃15min
300 Cycles 22 PCS. 0/1
3 Thermal Shock
H : +100℃5min
∫10 sec
L : -10℃5min
300 Cycles 22 PCS. 0/1
4 High Temperature
Storage Temp. : 100℃1000 Hrs. 22 PCS. 0/1
5 Low Temperature
Storage Temp. : -40℃1000 Hrs. 22 PCS. 0/1
6 DC Operating Life IF= 20 mA 1000 Hrs. 22 PCS. 0/1
7 High Temperature /
High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1

18-225/B6R6C-C01/3T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 10 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
Pre-heating
150~200°C
60~120sec.
Above 217°C
60~150sec.
260°C Max.
10sec. Max.
6°C/sec.Max.
Above255°C
30sec.Max.
3°C/sec.Max.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.

18-225/B6R6C-C01/3T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 11 of 11
Device No:DSE-00005365 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃for 3 seconds within
once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: [phone]
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: [phone]
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com