Everpure Classic EV9007-10 User manual

Dual Temp Faucet Classic Series
Everpure Classic series dual temperature hot/cold drinking water faucets deliver cold or ambient filtered water and near boiling instant
hot water from a single spout. Exclusively designed to be used with the Everpure Commercial Grade Instant Hot Water Dispenser
(Solaria™) and other vented instant hot systems, these faucets are equipped with a built-in safety feature with spring loaded shut off to
prevent accidents. The cold side may be connected to the Everpure Commercial Grade Water Chiller (Polaria™) for refreshingly chilled
drinking water or just simply enjoy ambient filtered water from any Everpure Drinking Water System. The Everpure Dual Temperature
faucet features solid stainless steel construction and is available in two beautiful finishes, Polished Stainless and Brushed Stainless. They
are lead-free and feature a ceramic disc type valve for smooth functionality and lasting durability. Blue and red indicators on the handles
distinguish hot and cold sides.
For commercial grade water filtration
It’s water filtration you can trust
The same commercial quality that makes Everpure the overwhelming choice for
water filtration in restaurants is also available for your home. Everpure’s
exclusive precoat filtration technology combines Micro-Pure and a unique
pleated filter membrane to reduce particles as small as 0.5 microns. This
highly engineered design offers the largest filtering surface area, longer life and
consistent performance.
the pure solution
Our products polish water to premium quality so that water is sparkling and free
of unwanted tastes and odors. You’ll taste the difference in every sip and
everything made with water will taste better, too.
the convenient solution
Everpure systems are easily installed using common household tools. Our
systems mount under your sink and are plumbed to a separate filter faucet.
And cartridge replacement is easy, too — just like changing a light bulb.
Everpure Classic Hot/Cold Drinking Water
Faucets feature:
> Classic, dual handle design
> Selection of two beautiful finishes to match the most popular
designer faucets
> Spring loaded “hot” shut off valve safety feature
> Insulated heat-resistant spout
> Exclusively designed to be used with vented instant hot systems
> 0.5 GPM flow
> Lead-free
> Aerator tip provides even, clear stream of filtered water
> RO compatible with the use of a separate air gap

product specifications
Everpure
Drinking Water System*
Everpure
Polaria™*
Everpure
Solaria™*
7.91“
12.28“
5.75“
6.54“
*All products sold separately
Everpure® is a registered trademark of Everpure, LLC ©2008
Dual Temp Faucet Classic Series
flow rate
0.5 gal./min. (1.9L/min.)
operating pressure
20 to 90 psi
temperature
50 to 212 ºF (10 to 100 ºC)
installation
1" or standard sink hole installation
everpure warranty
This faucet is warrant to be free and clear
of defect and workmanship defect for 5
years. The coated finish is warranted for 3
years. After 3 years, depending on local
water conditions and/or cleaning agents
used, the coating may not be as bright as
new. For general cleaning, use a soft
damp cloth. The use of cleaning
chemicals is not recommended.
Polished Stainless Steel - Part No. EV9007-10
Brushed Stainless Steel - Part No. EV9007-11