Everpure Exubera EV9000-84 User manual

Everpure Exubera™
Drinking Water Faucets are
engineered to be used with:
Any Everpure Drinking Water Filtration systems
or Reverse Osmosis system and
Everpure Exubera™ Chilled/Sparkling
Water Appliance
Exubera™ Faucet Designer Series
Everpure Exubera™ drinking water faucets deliver the best tasting chilled, sparkling or still water available from a single spout. The
perfect complement to an Everpure commercial grade water filtration system, the Exubera™ drinking water faucets are exclusively
designed to be used with the Exubera™ Chilled/Sparkling Water Appliance. These faucets are equipped with solid stainless steel
construction and available in two beautiful finishes, Polished Stainless and Brushed Stainless. They are lead-free and feature a ceramic
disc type valve for smooth functionality and lasting durability.
For commercial grade water filtration
It’s water filtration you can trust
The same commercial quality that makes Everpure the overwhelming choice for
water filtration in restaurants is also available for your home. Everpure’s
exclusive precoat filtration technology combines Micro-Pure and a unique
pleated filter membrane to reduce particles as small as 0.5 microns. This
highly engineered design offers the largest filtering surface area, longer life and
consistent performance.
the pure solution
Our products polish water to premium quality so that water is sparkling and free
of unwanted tastes and odors. You’ll taste the difference in every sip and
everything made with water will taste better, too.
the convenient solution
Everpure systems are easily installed using common household tools. Our
systems mount under your sink and are plumbed to a separate filter faucet.
And cartridge replacement is easy, too — just like changing a light bulb.
Everpure Exubera™ Drinking Water Faucets
feature:
> Sleek, dual handle design
> Solid Stainless Steel construction in two beautiful finishes
> Spring loaded “hot” shut off valve safety feature
> Insulated heat-resistant spout
> 0.5 GPM flow
> Lead-free
> Ceramic disc type valve
> Aerator tip provides even, clear stream of filtered water
> RO compatible with the use of a separate air gap

product specifications
7“
9.875“
4.25“
4.625“
2.125“
1.75“
Everpure
Drinking Water System*
Everpure
Exubera™ Front*
Everpure
Exubera™ Back*
*All products sold separately
Everpure® is a registered trademark of Everpure, LLC ©2008
Exubera™ Faucet Designer Series
flow rate
0.5 gal./min. (1.9L/min.)
operating pressure
20 to 90 psi
temperature
50 to 212 ºF (10 to 100 ºC)
installation
1" or standard sink hole installation
everpure warranty
This faucet is warrant to be free and clear
of defect and workmanship defect for 5
years. The coated finish is warranted for 3
years. After 3 years, depending on local
water conditions and/or cleaning agents
used, the coating may not be as bright as
new. For general cleaning, use a soft
damp cloth. The use of cleaning
chemicals is not recommended.
Polished Stainless Steel Finish - Part No. EV9000-84
Brushed Stainless Steel Finish - Part No. EV9000-88