Everpure Dual Temp Faucet User manual

Polished Stainless Steel
Dual Temp Faucet hot/cold drinking water faucet
Everpure Designer Dual Temperature hot/cold drinking water faucets deliver cold or ambient filtered water and near boiling instant hot
water from a single spout. Exclusively designed to be used with the Everpure Solaria™ Instant Hot Water Dispenser and other vented
instant hot systems, these faucets are equipped with a built-in safety feature with spring loaded shut off to prevent accidents. The cold
side may be connected to the Everpure Polaria™ Water Chiller for refreshingly chilled drinking water or just simply enjoy ambient filtered
water from any Everpure Drinking Water System. The Everpure Dual Temperature faucet features solid stainless steel construction and is
available in two beautiful finishes. They are lead-free and feature a ceramic disc type valve for smooth functionality and lasting durability.
Blue and red indicators on handles distinguish hot and cold sides.
For commercial grade water filtration
It’s water filtration you can trust
The same commercial quality that makes Everpure the overwhelming choice for
water filtration in restaurants is also available for your home. Everpure’s
exclusive precoat filtration technology combines Micro-Pure and a unique
pleated filter membrane to reduce particles as small as 0.5 microns. This
highly engineered design offers the largest filtering surface area, longer life and
consistent performance.
the pure solution
Our products polish water to premium quality so that water is sparkling and free
of unwanted tastes and odors. You’ll taste the difference in every sip and
everything made with water will taste better, too.
the convenient solution
Everpure systems are easily installed using common household tools. Our
systems mount under your sink and are plumbed to a separate filter faucet.
And cartridge replacement is easy, too — just like changing a light bulb.
Everpure Designer Hot/Cold Drinking Water
Faucets feature:
> Sleek dual handle design
> Solid Stainless Steel construction in two beautiful finishes
> Spring loaded “hot” shut off valve safety feature
> Insulated heat-resistant spout
> Exclusively designed to be used with vented instant hot systems
> 0.5 GPM flow
> Lead-free
> Ceramic disc type valve
> Aerator tip provides even, clear stream of filtered water
> RO compatible with the use of a separate air gap

product specifications
7“
9-7/8“
4-1/4“
4-5/8“
2-1/8“
1-3/4“
Everpure
Drinking Water System*
*All products sold separately
Everpure
CGCL-1 Chiller*
Everpure
CGHE-1 Instant Hot*
Everpure® is a registered trademark of Everpure, LLC ©2007
Dual Temp Faucet hot/cold drinking water faucet
flow rate
0.5 gal/min. (1.9 L/min.)
temperature
50 to 212ºF (10 to 100ºC)
pressure
20 to 90 psi
installation
1” or standard sink hole installation
everpure warranty
This faucet is warrant to be free of defect
and workmanship defect for 5 years. The
coated finish is warranted for 3 years.
After 3 years, depending on local water
conditions and/or cleaning agents used,
the coating may not be as bright as new.
For general cleaning, use a soft damp
cloth. The use of cleaning chemicals is
not recommended.
Polished Stainless Steel - Part No. EV9000-85
Brushed Stainless Steel - Part No. EV9000-86