Everpure MR-225 User manual

BENEFITS
APPLICATIO N /SIZING
INSTALLATIO N TIPSOPERATIO N TIPS
MR-225 Replacement Cartridge
Mineral Reduction Cartridge
MR-225 Replacement Cartridge: EV9627-03
MR-225 Replacement Cartridge: EV9627-03 Improves equipment life and performance by
removing at least 90%+ of all dissolved solids
using Reverse Osmosis Separation Technology
A reduction in Total Dissolved Solids (TDS)
make the water less likely to impart undesirable
tastes in beverages, sauces, soups and other food
products
Especially useful on steamers, warmers, steam
boilers and other evaporative equipment that are
not emptied each day
Heating surfaces maintain peak heat transfer
efficiency, reducing cycle times and energy
consumption
Limits limescale build-up, which can cause
excessive machine downtime and maintenance
costs
Sanitary cartridge replacement is simple, quick
and clean. Internal filter parts are never exposed
to handling or contamination
Install vertically with cartridge hanging down
Allow 2-1/2” clearance below the cartridge for
easy cartridge replacement
Use piping materials suitable for high-purity
water after MRS System
Refer to Installation, Operation & Maintenance
Manual for cartridge flushing and RO start-up
Change MR Cartridge on a regular 24 month
preventative maintenance program
Change MR Cartridge when output capacity
diminishes by 15%, or when output pressure
becomes too low.
Always flush the MR cartridge at time of
installation and cartridge change
Proper pre-treatment is required to control MR
Cartridge (membrane) scale formation and/or
fouling.
- Raw water hardness in excess of 7 grains per
gallon should be softened to extend cartridge life
- The raw water may contain chlorine or
other oxidizers and the use of a carbon pre-filter
is recommended.
Contact EVERPURE Technical Service for
pre-treatment recommendations
Mineral Reduction Cartridge for High TDS
Waters
Capacity: 225 Gallons per Day nominal
Ideal for:
Coffee/espresso machines, reconstitution, ice,
flash steamers, conventional steamers, combi-
ovens and multiple applications
EV9627-03

23.13"
MR-225 Replacement Cartridge
Overall Dimensions:
17.00”H x 3.25”D
Daily Production Rate:
225 GPD (852 lpd) Nominal. Water pressure,
feedwater quality and temperature will effect
actual daily production rate
Service Flow Rate:
Dependant on water volume and pressure in
storage tank(s), and line size(s) to equipment
Pressure Requirements:
40 - 100 psi (276-689 kPa), non-shock.
Inlet Temperature:
35 - 100°F (2-38°C)
Inlet TDS:
1,500 ppm max recommended
The contaminants or other substances
removed or reduced by this system are not
necessarily in your water. Do not use with
water that is microbiologically unsafe or of
unknown quality without adequate
disinfection before or after the system.
Everpure
1040 Muirfield Drive
Hanover Park, IL 60133
Everpure water treatment systems (excluding replaceable elements)
are covered by a limited warranty against defects in material and
workmanship for a period of five years after date of purchase.
Everpure replaceable elements (filter cartridges and water treatment
cartridges) are covered by a limited warranty against defects in
material and workmanship for a period of one year after date of
purchase. See printed warranty for details. Everpure will provide a
copy of the warranty upon request.