evertz EMR-32x32-3G User manual

EMR-32x32-3G
EMR 12G/3G/HD Router
User Manual
© Copyright 2020
EVERTZ MICROSYSTEMS LTD.
5292 John Lucas Drive
Burlington, Ontario
Canada L7L 5Z9
Phone: [phone]
Sales: [e-mail] Fax: [phone]
Tech Support: [e-mail] Fax: [phone]
Web Page: http://www.evertz.com Twitter: @EvertzTV
Version 1.2, July 2020
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of
purchasers of EMR-32x32-3G. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the operation of the
EMR-32x32-3G.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems Ltd. Copies of
this manual can be ordered from your Evertz dealer or from Evertz Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Read this information
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two
blades with one wider than other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles
and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC –
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

INFORMATION TO USERS IN EUROPE
NOTE
This equipment with the CE marking complies with both the EMC Directive (89/336/EEC) and the Low
Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European standards:
•EN60065 Product Safety
•EN55103-1 Electromagnetic Interference Class A (Emission)
•EN55103-2 Electromagnetic Susceptibility (Immunity)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to the European Union EMC directive. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
WARNING
Changes or modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s
authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables
with the shield connected to the chassis ground of the device must be used.

EMR-32x32-3G
EMR 12G/3G/HD Router
Revision 1.2 Page. i
REVISION HISTORY
REVISION DESCRIPTION DATE
1.0
First Release
July 2019
1.1
1.2
Revised Section 2 and Section 4
Updated information for serial port
April 2020
July 2020
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof or
for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning
performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The
only warranty offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order
confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no
warranty is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or
order confirmation. Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If
you encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make
changes in equipment design or specifications.

EMR-32x32-3G
EMR 12G/3G/HD Router
Page. ii Revision 1.2
This page left intentionally blank

EMR-32x32-3G
EMR 12G/3G/HD Router
Revision 1.2 Page. iii
TABLE OF CONTENTS
1. OVERVIEW ...................................................................................................................................1
2. INSTALLATION ............................................................................................................................3
2.1. UNPACKING ........................................................................................................................3
2.2. PHYSICAL INSTALLATION.................................................................................................3
2.2.1. Router Frames ..........................................................................................................3
2.2.2. Remote Panels..........................................................................................................3
2.3. REAR PANEL CONNECTIONS ...........................................................................................3
2.3.1. Video Inputs & Outputs..............................................................................................3
2.3.2. Serial Connections ....................................................................................................3
2.3.3. Ethernet Connections ................................................................................................4
2.3.4. Reference..................................................................................................................6
2.3.5. Power Supply ............................................................................................................6
2.3.6. Grounding and Bonding-NEBS Applications..............................................................6
3. SPECIFICATION...........................................................................................................................7
3.1. SERIAL VIDEO INPUTS ......................................................................................................7
3.2. SERIAL VIDEO OUTPUTS...................................................................................................7
3.3. SWITCHING REFERENCE ..................................................................................................7
3.4. CONTROL............................................................................................................................7
3.5. PHYSICAL ...........................................................................................................................7
3.6. ELECTRICAL.......................................................................................................................7
4. OPERATION .................................................................................................................................8
4.1. SYSTEM OVERVIEW...........................................................................................................9
4.2. SYSTEM CONFIGURATION................................................................................................9
4.2.1. Setting the IP Address...............................................................................................9
4.2.2. Controlling the EMR Using Serial ............................................................................10
4.2.3. Accessing the Configuration and Monitoring Menu ..................................................10
4.2.4. Configuration and Monitoring Menu.........................................................................11
4.2.5. Configuring Network Settings ..................................................................................12
4.2.6. SNMP Setup............................................................................................................12
4.2.7. Engineering Debug Tool..........................................................................................12
4.2.8. Built-In Self Test ......................................................................................................12
4.2.9. SYSLOG Configuration ...........................................................................................12
4.3. SIGNAL AND SYSTEM MONITORING..............................................................................13
4.4. CONTROL SYSTEM ..........................................................................................................13
4.4.1. Controlling the EMR using Ethernet.........................................................................13
4.4.2. Controlling the EMR using Serial.............................................................................13
5. VISTALINK® REMOTE MONITORING AND CONTROL............................................................15
5.1. WHAT’S VISTALINK®? .....................................................................................................15

EMR-32x32-3G
EMR 12G/3G/HD Router
Page. iv Revision 1.2
5.2. GENERAL MONITORING AND CONTROL PARAMETERS ............................................. 16
5.2.1. System ................................................................................................................16
5.2.2. Product Features.....................................................................................................18
5.2.3. Configuration...........................................................................................................19
5.2.4. Signal Status ...........................................................................................................20
5.2.5. Audio Status............................................................................................................21
5.2.6. Notify ................................................................................................................22
5.2.7. TRAP Config ...........................................................................................................23
5.2.8. Manage Routes.......................................................................................................23
6. CONFIGURING THE SYSTEM USING WINSETUP....................................................................25
6.1. COMMUNICATION PORT SETUP .....................................................................................29
6.1.1. Control Panel Ethernet Interface .............................................................................29
6.1.2. Ethernet Interface....................................................................................................30
7. FIRMWARE UPGRADE ..............................................................................................................33
7.1. UPGRADING EMR.............................................................................................................33
8. DEFINITIONS..............................................................................................................................35
FIGURES
Figure 1-1 : EMR-32x32-3G Rear Plate Options............................................................................1
Figure 2-1 : EMR-32x32-3G Serial Connection..............................................................................4
Figure 4-1 : Serial to Ethernet Bridge Config ...............................................................................10
Figure 5-1 : VistaLINK® - System................................................................................................16
Figure 5-2 : VistaLINK® - Product Features ................................................................................18
Figure 5-3 : VistaLINK® - General...............................................................................................19
Figure 5-4 : VistaLINK® - SFP.....................................................................................................20
Figure 5-5 : Figure 5-5: VistaLink® - Audio Status (future implementation)..................................21
Figure 5-6 : VistaLINK® - Notify ..................................................................................................22
Figure 5-7 : VistaLINK® - TRAP Config.......................................................................................23
Figure 6-1 : WinSetup Configuration Editor ................................................................................. 25
Figure 6-2 : WinSetup Frame Editor ............................................................................................26
Figure 6-3 : WinSetup Source Definition......................................................................................27
Figure 6-4 : WinSetup Destination Definition ...............................................................................27
Figure 6-5 : WinSetup Panel Configuration..................................................................................28
Figure 6-6 : Port Setup ................................................................................................................29
Figure 6-7 : Ethernet Panels – Port Settings................................................................................30
Figure 6-8 : Ethernet Port Settings ..............................................................................................31
Figure 7-1 : WebEASY® - Upgrade Button on Top Menu Bar .......................................................33
Figure 7-2 : WebEASY® - Firmware Upgrade Menu.....................................................................33
TABLES
Table 2-1 : Standard RJ-45 Wiring Color Codes............................................................................5

EMR-32x32-3G
EMR 12G/3G/HD Router
Revision 1.2 Page 1
1. OVERVIEW
EMR-32x32-3G is a 32-input by 32-output modular router designed to natively switch HD and 3G
signals. It supports UHD signals as quad-link using deterministic routing. Single-link 12G UHD support
can also be added as a feature key. A variety of different rear plates are available that provide
connections via HDBNC, fiber or a combination of both.
For maximum control flexibility, this router can be used in conjunction with Evertz® award-winning
MAGNUM Unified Control System. Or, for smaller systems, the router can host a number of Evertz®
control panel models over Ethernet.
Figure 1-1 : EMR-32x32-3G Rear Plate Options

EMR-32x32-3G
EMR 12G/3G/HD Router
Page 2 Revision 1.2
Control
EMR-32x32-3G is housed in any of Evertz® standard EMX-6, EMX-3 or EMX-1 frames supporting dual-
frame controllers, providing redundant control connections.
Remote Control Panel
Any traditional or simple Evertz® control panels can be used with EMR-32x32-3G while hosted either
locally or through a control system.
External Third-Party Control
EMR-32x32-3G can be controlled remotely via external third-party control devices, such as an
automated system.
Power Supply
EMR-32x32-3G is housed in Evertz® standard EMX-6, EMX-3 or EMX-1 frames, all of which support
dual hot-swappable power supplies ensuring continuous operation.
Technical
EMR-32x32-3G offers full 3Gbps bandwidth. 12G support is also available as a feature key. Automatic
bit rate detection on the input equalizer allows any mix of HD, 3G and 12G signals in the same unit.
Features & Benefits
Designed with up to 12Gbps input EQs and output reclockers
Full broadcast specifications
Quartz over IP router control
Redundant Ethernet network connections
Redundant power
Full VistaLINK® PRO Command & Control, SNMP
Output up to 12G – reclocking on/off
Rear plate support for HDBNC, SFP (fiber), or both