Everycom X9 User manual

EVERYCOM X9 PROJECTOR
USER MANUAL
Please read manual throughly before using and keep it for future reference.

CONTENTS
Packing Content 01
Projector Connection 05
Input Source 04
Quick Start 03
Function Overview 02
Projection Distance & Size 05
Specifications 09
Troubleshooting Guide 10
Projection Methods 06

Remote User Manual
PACKING LIST
NOTICE
AV Cable HDMI Cable Power Cable
Projector
Recommended Not Recommended
Support @ 1800-121-4480
Flip
Zoom

Focus
Keystone
IR
Menu
Input Source
Left
On/Off
Right
UP
Down
Y/pb/pr
Power Input
Audio Input
VGA
USB1
USB2
HD1
HD2
AV in
Air Inlet
Speaker Air Outlet
Lens
IR
Play / Pause
Up
Zoom
On / Off
Left
Back
Volume-
Right
Volume+
Input Source
Down
Menu
Mute
Flip
Filter
Support @ 1800-121-4480
Flip
Zoom

QUICK START
Plug the power cord into
an outlet.
Take off the lens cover
Press the power button
to turn on the projector.
Select the correct input
source to project your device.
Connect your device to the projector correctly.
*Sold Separately
Adjust the kickstand
accordingly.
Adjust the keystone and focus ring to
get the best image performance.
Press the power button twice
to turn off the projector
KEYSTONE
FOCUS
Type-C Lightning Micro USB
Support @ 1800-121-4480

Support @[phone]
Press button on the projector or remote to enter the interface of INPUT SOURCE.
B. USB Connection
INPUT SOURCE
A. VGA Connection
C. HDMI Connection
VGA
HDMI 2
HDMI 1
YPbPr
AV
USB
VGA
HDMI 2
HDMI 1
YPbPr
AV
USB
VGA
HDMI 2
HDMI 1
YPbPr
AV
USB
VGA
HDMI 2
HDMI 1
YPbPr
AV
USB
Input Source
Input Source
Input Source
Support @ 1800-121-4480

Support @[phone]
Support @[phone]
5.25ft
(1.6m)
9.84ft
(3m)
11.48ft
(3.5m)
17.39ft
(5.3m)
19.69ft
(6m)
23.29ft
(7.1m)
45"
85"
100"
150"
170"
200"
The Recommended projection screen is around 85 inches with a projection distance of around 9.84ft.
Ambient darkness will improve the clarity of the projected images.
PROJECTOR CONNECTION
PROJECTION DISTANCE & SIZE
Support @ 1800-121-4480

PROJECTION METHODS
4 Projection methods: Depending on how you place the projector, you may need to change the projection mode
so your images will be projected correctly.
1.1 Factory defaults: The Projector is mounted on the same side of the same side of the screen as the viewer
1.2 Rear: The installation position of the projector and the audience are located on the two side of the screen.
You can change the projection mode to rear with the remote control by clicking MENU > SETTING > PROJECTION
MODE (Rear on Desk) as the following pictures show.
Front Projection
MENU
Front On Desk
Rear On Desk
Front On Ceiling
Rear On Ceiling
1
34
Support @ 1800-121-4480
06

1 2
MEUN
34
Support @ 1800-121-4480
1.3 Front/Ceiling

1 2
MEUN
34
Support @ 1800-121-4480
08
1.4 Front/Ceiling