Eview EV-202 User manual
Smart GPS Pet Collar
The Smart GPS Collar is designed
for monitoring and protecting pet. GPS,
WIFI, Bluetooth and cellular technologies
work together to allow you to find and
protect your pet, giving you the peace of
mind you’ve always needed. With this you
can set custom safe zones for your pet.
This creates a virtual boundary around
specific areas that your setup and control
via the app. Also, the LED light to see your
pet in the dark and will blink when lost.
01
Introduction- Front
Power button
LED light
02
Back
Charging contacts
03
Charging your device
Please charge your device for at least 1 hour
before using.
When placing magnetic USB cable to device
charging contacts make sure it is positioned
correctly.
The LED should blink when charging and solid
when fully charged.
When the battery level falls below 20% it will
send low battery warning message to people
on the contact list via text message or APP.
04
Turning on and off device
To turn the device on- press the power button 3
to 5 seconds. The LED will flash rapidly for few
seconds and then LED off (save power). The
device can also be turned on automatically by
charging the battery.
To turn the device off- it can
only be turned off from
configuration tool.
3-5
sec.
05
Reboot device
To reboot the device-long press the power
button 20 seconds and stop, then short press
1 second.
20
sec. 1
sec.
Loosen
your
hand
We strongly recommend to turn off LED
to save a lot of power (short press power
button can turn off LED)
TIP
06
Download mobile app
Or search smart locator from APP store or
Google play
07
Create an account
Create a login ID and password for this
application.
08
Add device from APP
The IMEI number must be entered
correctly.
TIP
It is not mandatory for all numbers to be
set, however a minimum of one must
always to be set.
TIP
Select the right country code and put the
numbers you want to send alert.
09
How to set contact numbers
Different working mode with different
power consumptions, remember that
more frequent location updates will
reduce battery life.
TIP
Select working mode and you can choose how
often the map will refresh the device’s location
by change reporting time, default working
mode is 4 and refresh location every 1 hour.
10
Location update (Automatic)
Better to click single locate when device
in working mode 1,2 or 3.
TIP
11
Location update (Manual)
1
Sending text
message “Loc“ from
the app to device
2
Single locate
from APP
Better to click continuous locate when
device in working mode 1,2 or 3.
TIP
Default continuous locate time is every 10
seconds to refresh location and last 10
minutes. you can change the time from APP.
Continuous locate from APP
12
Location update (Manual)
3
A geofence is a virtual boundary around a
particular location. If you have set a geofence,
you will receive a notification when your
device leaves or enters the boundary of
geofence Zone.
13
Creating a geofence
14
LED light control
Turn on led light to see your dog in the dark
when lost.
Use Activity Tracking to easily find out if your
pet is getting enough exercise.
15
Activity monitoring
16
History playback
17
Specifications
Dimension: 450mm*26mm
Weight: 75g
Battery: Rechargeable, 3.7V,300mAh
Charging voltage: 5V DC
Battery life: Up to 3 days under normal use.
Waterproof: IP67
4 locating technologies: GPS , BLE , WIFI , LBS
www.eviewgps.com
Table of contents
