Evinci TUI User manual

EVINCI ebikes Tui/Robin/Falcon
Advanced Display Configuration Settings
These configuration pages define the behaviour of the controller and the way how the
display calculates speed and distance. Wrong settings will lead to wrong speed and
distance readings.
If you feel that your power has changed or the speed seems not to match any more,
please check these settings.
To enter hold + and – buttons for longer than 2 seconds:
Press button to flip through settings pages 1...5
To leave and save at any stage press + and – together.
Settings page 1
First page allows reset of trip
counter. Press – key → distance will
be reset to 0.
Settings page 2
aximum speed setting for
controller. 99.9 (45.0 first
generation) = no speed limit. Can
be reduced for safety purpose.
Independent of PAS level, as soon
as speed limit will be reached
motor will turn off.

Settings page 3
Wheel diameter.
26” for Falcon and Tui.
20” for Robin.
A wrong setting will cause wrong
speed and distance readings.
Settings page
Selection between K /H or
P/H.
Settings page 5
(not present in generation 1)
Controller power setting: changes
the total maximum output power in
all PAS levels.
3 = ax (100%)
2 = edium (80%)
1 = Soft (50%)
Can be useful for riders who are
never going to use the full motor
power and want to have a better
spread of lower power levels.