Evinci TUI+ User manual

EVINCI ebikes TUI+ / ROBIN+ / FALCON+
Advanced Display Configuration Settings (C300U)
These configuration pages define the behaviour of the controller and the way how the
display calculates speed and distance. Wrong settings will lead to wrong speed and
distance readings.
If you feel that your power has changed or the speed seems not to match any more,
please check these settings.
To enter hold + and – buttons for longer than 2 seconds:
Press button to flip through settings pages 1...8
To leave and save at any stage press + and – together for longer than 2 seconds.
Settings page 1
First page allows reset of trip counter.
Press – key → distance will be reset to
0.
Settings page 2
aximum speed setting for controller.
99.9 = no speed limit. Can be reduced
for safety purpose.
Independent of PAS level, as soon as
speed limit will be reached motor will
turn off.

Settings page
Wheel diameter.
26” for Falcon and Tui.
20” for Robin.
A wrong setting will cause wrong speed
and distance readings.
Settings page 4
Selection between K /H or P/H.
Settings page 5
Controller power setting: changes the
total maximum output power in all PAS
levels.
3 = ax (100%)
2 = edium (80%)
1 = Soft (50%)
Can be useful for riders who are never
going to use the full motor power and
want to have a better spread of lower
power levels.

Settings page 6
System voltage: 36V
A wrong setting will show wrong battery
levels.
Settings page 7
Amount of configured assistance levels.
ust match with the motor controller: 8
Settings page 8
Back light brightness: 1...3