UBCO 2X2 User manual

1. Remove cable ties
ACut the cable ties that secure the kick stand(s) to the frame. Put the kickstand
down and rest the bike on the kickstand.
ACut the cable ties that secure the foot pegs to the frame.
3. Align the headlight
ALoosen the two upper screws that
attach the headlight clamps to the
handlebars using the 3mm Allen key.
ATilt the headlight to aim forward so the
dot stickers are aligned and re-tighten
the two screws.
4a. Install the power supply
AIMPORTANT: inspect the power supply; contact UBCO if there is any transit damage.
ARetract the power supply lock and remove the battery strap from the frame. Carefully
lower the power supply into place, with the power socket on the right-hand side of
the bike.
APlug the bike’s power supply plug into the power socket. Use the securing key to
engage the power supply lock.
ASecure the battery strap as shown at the right.
2. Align the handlebars
ALoosen the side bolts on the stem
with the 5mm Allen key. Straighten
the handlebar in line with the front
wheel. The stickers should line up
as well.
AOnce aligned, re-tighten side
bolts, alternating as you tighten to
prevent damage to the threads.
(Fasten to 15Nm if you have a
Torque wrench.)
If your 2X2 has arrived in the box,
here’s how to set up your new ride.
Lift up the seat to find a tool kit with all the tools you
need. A pair of scissors or a knife will also be handy
and a torque wrench if you have one.
KIA ORA
HELLO.
Scan this QR code to watch
our bike assembly video.
If you don’t feel confident
putting your bike together,
contact us for help.
Left
bar
Power Supply
Right
bar
13
2
4b. Secure the battery strap
AVelcro side up, tuck the end of the battery strap under the left hand bar, central
to the power supply.
ACarry the strap over the power supply and tuck it under the right hand bar. Feed
the strap back through the clip and centre the clip.
ATighten the strap and secure it closed.
OPERATING INSTRUCTIONS
STEP 1:
Turn on the 2X2
Locate the key fob in the
underseat tool kit. Power
the bike by pressing the
button on the key
fob 1.5 seconds. The
headlight will turn on.
See the complete
instructions in the User
Manual on page 16.
STEP 2:
Download the UBCO App
You can download the
UBCO App to control the
settings of your 2X2 and get
critical updates delivered
wirelessly. Simply search for
UBCO in your phone’s app
store and download it for
free. Make sure Bluetooth
is activated on your mobile
phone when connecting the
app to your 2X2.
STEP 3:
Check power supply charge
Your power supply will arrive with
partial charge, enough to ride for a
few minutes. Be sure to fully charge
the power supply before you plan a
longer ride.
STEP 4:
Before you ride
Ensure you’ve read the user manual
and are familiar with how to use
the bike and the proper safety
precautions. Always wear a helmet.
Once you’ve educated yourself and
are ready to ride, start her up and GO!!!
Key fob
Securing key
Find UBCO online:
ubcobikes.com
.com/ubcobikes
instagram.com/ubcobikes
youtube.com/ubcobikes
Join the UBCO Owners group at
facebook.com/groups/ubcoowners for
insider tips and tricks from our community.

PRERIDE
CHECKLIST
2
5
1
4
6
3
UBCO 2X2 WORK BIKE
1. Check your power supply is
suciently charged.
2. Ensure the battery strap and
plug are secured tightly.
3. Ensure the lights are working:
headlight, rear light, and
brake light.
4. Test the brakes & the horn
are functioning properly.
5. Check the tyre pressure;
inflate if needed.
6. Do a physical check to
ensure all nuts, bolts, and
fixings are tight and all loads
are secure.
7. Always wear a helmet and
appropriate clothing and
footwear.
Before you head out on your 2X2, always
check that your bike is ready to ride.
ubcobikes.com
[email protected]
#ubco2x2
.com/ubcobikes
@ubcobikes
youtube.com/c/ubcobikes