EVOnet CM2000 User manual

This manual is intended for users of the EVOnet-CM2000 ceiling mounting
bracket. It includes instructions for mounting the EVOnet-CM2000 ceiling
mounting bracket to a ceiling.
• This bracket is intended to be used with EVOnet series 4 Dome
cameras. Do not use it with other models of cameras.
• This installation should be performed by a qualied service
personnel in conformance to all local codes.
• You may need to reinforce the ceiling. If the ceiling is not strong
enough to support the camera, the camera may fall.
• Do not use this product for other purposes.
Mounting
Mount the bracket to the ceiling as follows:
1 Insert cables from external
devices, network and power
adapter into base.
2 Mount base to the ceiling by
using the anchors and screws.
Or, mount bracket 1 to the
ceiling and then the base to
bracket 1 by using the anchors
and screws.
3 Insert cables from external
devices, network and power
adapter through the ceiling
pipe.
4
Assemble the ceiling pipe into
the base.
5
Insert cables from external
devices, network and power
adapter into bracket 2.
6
Assemble bracket 2 into the
ceiling pipe and x it by using
the screws.
EVOnet-CM2000 INSTALLATION MANUAL
Ø 30mm (1.18”)
Base
Screw 4X25, 4EA
Bracket 1
Hexagon Socket 5X10, 4EA
Ceiling
Hole Ø25~30mm
Base
Screw 4X25, 4EA
Ø 6.5mm
(0.26”)
84mm (3.31”)
84mm
Base
Ceiling Pipe
Screw Set M8X8, 2EA
Screw Set M8X8, 2EA
Bracket 2

Ver.1.0
Connect your camera to the bracket as follows:
7 If you have a EVOnet
If you have anEVOnet series 4
"B" camera, screw the camera
body onto bracket 2.
DA-AP2000
Bracket 2
Bottom
Cover
Bracket 2
Camera
Body
8 Connect or screw the
camera dome cover
onto the camera body or
bottom cover.
9 Turn on power.
Bottom
Cover
Camera
Dome
Cover
Camera
Body
Camera
Dome
Cover
Dimensions Unit: mm (inch)
When it is folded, 341 (13.43)
When it is unfolded, 541 (21.3)
Ø 144.5
(5.69)
Ø 99.5
(3.92)
EVOnet Series 4 "B"
S47325 EVOnet-C-ID420-MZIR
S47328 EVOnet-C-VD420-MZIR
S47347 EVOnet-C-ID420-MZ
S47348 EVOnet-C-VD420-MZ
EVOnet Series 4 "B"
EVOnet Series 4 "A"
EVOnet Series 4 "A"
S47326 EVOnet-C-IDVF430IR
S47327 EVOnet-C-VDVFWDR420
S47329 EVOnet-C-VDVF430IR
series 4 "A" camera, screw the
bottom cover onto an adaptor
plate (EVOnet-AP2000) and the
adaptor plate onto bracket 2.
The adaptor plate is sold
separately.
EVOnet Series 4 "A" EVOnet Series 4 "B"
EVOnet Series 4 "B"
Ceiling Mount#SBDLFU
S47757 EVOnet-CM2000
EVOnet Series 4 "A"
Ceiling Mount Kit
S47769 EVOnet-CM KIT
For more information on these and other best-in-class solutions
from Hills, call us on 1800 685 487 or visit hills.com.au