Vivo STAND-VAD1B User manual

Adapte Backet Assembly
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model STAN VA1B
Tools Requied
phillips screwdriver
Package Co te ts
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
A (x4)
Bracke Arm
B (x4)
“ L Suppor
C (x4)
Plasic Cover
 (x8)
Nu
E (x8)
Carriage Bol
F (x4)
M6x4
G (x4)
M6x6
H (x4)
M6x8
I (x1)
Wrench
- -https//vivo us.com/poducts/sta d vad1b

Assembly Steps
2
Step 1
Attach holders (B) to arms (A) using M6 monitor screws (F, G, or H)
depending on monitor thickness. Do not tighten.
Step *
Install arms to your VESA mount in one of the four patterns shown
(depending on the size and shape of your monitor) using carriage
bolts (E) and nuts (D). Tighten nuts using wrench (I) for lower two
arms (A) only at this time.
Optio A
Optio B
A
A

Step 3
With all holders facing up, place monitor on lower two holders and
tighten lower two screws. Turn top holders down and tighten top
screws, then tighten nuts for the upper arms. Install covers (C) to
holders.
Step * (Co ti ued)
Optio 
Optio C
A
A
3

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safety Wa i g
Co tact us at
Last updated: 0 /2 /18
Step 3 (Co ti ued)
With all holders facing up, place monitor on lower two holders and
tighten lower screws. Turn top holders down and slide upper two
arms down until holders rest on monitor. Tighten nuts for upper
arms, then install covers (C) to holders.
4