
EVOnet-WM2000 INSTALLATION MANUAL
This manual is intended for users of the EVOnet-WM2000
wall mounting bracket. It includes instructions for
mounting the EVOnet-WM2000 wall mounting bracket to a
wall.
• This bracket is intended to be used with
EVOnet series 4 cameras. Do not use it with
other models of cameras.
• This installation should be performed
by a qualied service personnel in conformance
to all local codes.
• You may need to reinforce the wall. If the wall
is not strong enough to support the camera,
the camera may fall.
• Do not use this product for other purposes.
Mounting
Mount the bracket to the wall as follows:
1 Mount bracket 1 to the wall by using the anchors
and screws.
Bracket 1
Bracket 1
2 Insert cables from external devices,
network and power adapter through the hole
in bracket 1 and the rear of bracket 2.
3 Screw bracket 2 to bracket 1.
Cable
Bracket 2
Bracket 1
4 Assemble bracke 3 into bracket 2 and x it by using
the screws.
Cable
Bracket 1
Bracket 3
Bracket 2