Evplug Ev20002 User manual

Page | 1 User manual for evplug adaptor 7.4kW PN. EV20002 www.evplugchargers.com

Portable EV charger manual

7.4kW PN. EV20002

Features:

Charging plug meet: IEC 62196 and

SAEJ1772

Operating temperature: -30ºC to +50ºC

Excellent protection performance

Protection Grade IP55-Working

condition.

Mechanical Properties

Mechanical life: no-load plug in / pull out

> 10000times

Impact of external force: can afford 1m

drop and 2T vehicle run over pressure

Electric Performance

Rated Current and Voltage: as table

attached below

﹒Insulation Resistance: >1000MΩ

(DC500V)

﹒Terminal Temperature Rise: < 50K

﹒Contact impedance: 0.5 mΩ Max

Cautions:

﹒DO not put the charging adaptor in the

water.

﹒DO not step on the adaptor, do not pull

it, do not fold it up and do not know it.

﹒DO not place the charging adaptor near

high-temperature objects.

﹒DO not use the charging adaptor in

extreme temperatures (normal operating

range (-30ºC to +50ºC).

Designed in EUROPE

Made in China

Page | 2 User manual for evplug adaptor 7.4kW PN. EV20002 www.evplugchargers.com

﹒Make sure that the charging plug and

the adaptor are free from any signs of

scratches, rust, cracks, etc.

﹒DO not charge if the power outlet is

damaged, rusted, cracked or loosely

connected.

﹒Before charging, make sure the power

plug and outlet are compatible.

Warnings:

﹒Carefully read these instructions and

your vehicle owner’s handbook before

charging your EV.

﹒Use only on the mains with fault

current circuit breaker.

﹒DO not use this product if the adaptor is

damaged.

﹒The product must be grounded.

﹒DO not use this unit with an extension

cord or adapter.

﹒DO not insert any fingers into the

charging plug.

﹒The unit contains no user serviceable

parts. DO not try to repair or service the

charging adaptor yourself.

﹒If the unit does not work properly in

accordance with the operating

instructions, do not use this unit. Contact

by email to [email protected] for

a repair or replacement.

﹒Use the product under normal away

from high temperature erosive materials

or ignition source.

﹒DO not contact metal conductor to

prevent electric shock accident.

﹒Product shell is made of thermoplastic,

please do not pound it

Charging:

1. Check the power distribution adaptor

for damage before powering up.

2. Plug the mains plug into the EV charger.

3. Make sure that the EV charger outlet

complies with national standards

4. Plug the vehicle plug into the socket of

your vehicle.

5. Make sure that the vehicle connector is

fully inserted until it clicks into place.

6. When your EV is fully charged

7. Disconnect the EV charger side gun.

8. Disconnect the EV side.

9. Cover the connector and cover the gun

10. Insert the charging adaptor into the

carrying case.

GUARANTEE:

Damage caused for the following reasons

is not covered by the warranty:

1. Improper handling, installation, use and

maintenance by the user.

2. The product falls into the water.

This warranty is for the original purchaser

only and is NOT transferable.

PLEASE NOTE: This document includes

the most recent information at the time of

going to press. EVplug reserves the right

to make changes to this product without

notice. Changes or modifications to this

product by a service center other than the

authorized one may void the product

warranty.