Evplug Ev40001 User manual

Page | 1 User manual for evplug Fuse Box 7.4kW PN. EV40001 and EV40002 www.evplugchargers.com

EV FUSE BOX manual

Compatible with all 3.6 and 7.4kW EV chargers

7.4kW PN. EV40001 y EV40002

Features

Easy Plug and Play installation

FULLY WIRED complaining EURO Standards

Auto reclosing circuit

Lock with key

Charging plug meet IEC 62196-2 standard.

Excellent protection performance

Protection Grade IP65-Working condition.

Operating temperature: -30C to +50C

Rated voltage: 230V 1 phase

Current Max.: 32A

Components characteristics

1. Over voltage under-voltage protection: Surge

arrester (BY18-1+1): 1P, Imax=20kA, 275VAC,

with remote control

2. Over current protection Auto reclosing circuit

2P, 40A, C curve, 6kA

3. Leakage protection RCCB (KRC3): 1P+N, A

type, 40A,

30mA

4. Meter:230V, 5(40)A, 50Hz (Only in option

EV40002)

5. 4. Plastic box (WDB6): 6way, IP65 (EV40001)

Easy Plug and Play

installation

FULLY WIRED complaining

EURO Standards

Auto reclosing circuit

Lock with key

Page | 2 User manual for evplug Fuse Box 7.4kW PN. EV40001 and EV40002 www.evplugchargers.com

or Plastic box (WDB9): 9way, IP65 (EV40002)

Electric Performance

Rated Current and Voltage: 250V AC 32A

﹒Insulation Resistance: >1000MΩ(DC500V)

﹒Terminal Temperature Rise: < 50K

﹒Contact impedance: 0.5 mΩ Max

Wiring specification

Specification: 6mm²

Wiring diagram as:

•Fig 1.1 (PN. EV40001)

•Fig.1.2 (PN. EV40002)

Cautions

﹒DO not put the device in the water.

﹒DO not step on the box, do not pull it, do not

fold it up.

﹒Do not plug the fuse box into a electric

installation prepared for less than 7.4W or

electric current limit under 32 A.

﹒DO not drop the frontal door or put heavy

things on it.

﹒DO not place the fuse box near high-

temperature objects.

﹒DO not use the device in extreme

temperatures (normal operating range (-30C to

+50C).

﹒The power supply input cable should have at

least 6mm² with a standard 32A jack. It is

proposed to complete the distribution of

electricity by professionals.

﹒Make sure that the fuse box is free from any

signs of scratches, rust, cracks, etc.

﹒DO not charge if the fuse box is damaged,

rusted, cracked or loosely connected.

Warnings

﹒Carefully read these instructions and your

vehicle owner’s handbook before installing your

EV fuse box and EV charger

﹒Use only on the mains with fault current

circuit breaker.

﹒DO not use this product if the EV charging

cable is damaged.

﹒This is not a EV charger, use a EV charger

connected between this Fuse box and your

electric vehicle.

﹒For use with EV charging.

﹒The product must be grounded.

﹒DO not use this unit with an extension cord or

adapter.

﹒The unit contains no user serviceable parts.

DO not try to repair or service the device

yourself.

﹒If the unit does not work properly in

accordance with the operating instructions, do

not use this unit. Contact your dealer for a repair

or replacement.

﹒Use the product under normal away from high

temperature erosive materials or ignition source.

﹒DO not contact metal conductor to prevent

electric shock accident.

﹒Product shell is made of thermoplastic, please

do not pound it to avoid reducing performances.

Installation

1. Check the installation comply with the

national standards and the incoming

wiring are a minimum of 6mm2

(10mm2 if the distant between the

power supply and the fuse box is

longer than 8m)

2. Connect your EV charger bellows this

point.

3. Make sure that the power outlet

complies with.

Page | 3 User manual for evplug Fuse Box 7.4kW PN. EV40001 and EV40002 www.evplugchargers.com

Warranty:

Damage caused for the following reasons is

not covered by the warranty:

1. Improper handling, installation, use and

maintenance by the user.

2. Pulling the connector or wires

3. Product falls into the water.

This warranty is for the original purchaser

only and is NOT transferable.

PLEASE NOTE: This document includes the

latest information at the time of printing.

EVplug Chargers, S.L. reserves the right to

make changes to this product without

further notice. Changes or modifications to

this product by other than an authorized

service facility could void the product

warranty

Failure mode:

Fault identifies that there is an error in the

upload process.

It can occur for the following reasons:

1. Differential protection: Error in the

ground connection, connector, cables or

very humid or wet vehicle battery.

2. High or low voltage: the supply voltage is

too high or too low.

4. High current or short circuit in charging

circuit.

In the event of this error, unplug the

charger, turn up all switches and reconnect

it. In case the error persists, contact an

authorized electrical installer.

Assembled components: