Excalibur AL-1510-EDP User manual

AL-1510-EDP
Deluxe 2-way Alarm & Keyless Entry
August 4, 2014
Operation Guide
Temporarycover.Colorcoverisinaseparatele.

2
Table Of Contents
Controller & Transmitter Overview................................................................................ 3
The 2-Way Controller ............................................................................................... 3
The 1-Way Transmitter ............................................................................................. 3
Controller & Transmitter Functions............................................................................... 3
Using The Valet Switch................................................................................................. 7
Emergency Override ................................................................................................ 7
Valet Mode................................................................................................................ 7
SecureCode ............................................................................................................. 7
Security System Features ............................................................................................ 8
Last Door Arming...................................................................................................... 8
Automatic Rearming................................................................................................. 8
Pre-Warn Detection .................................................................................................. 8
When The System Triggers...................................................................................... 8
The Status Light ........................................................................................................... 9
Multi-Car Operation .................................................................................................... 10
Selecting CAR #1 or CAR #2 ................................................................................. 10
Controller Options....................................................................................................... 10
LCD Screen Icons .................................................................................................. 10
Changing the Vehicle Image .................................................................................. 10
Setting The Clock ....................................................................................................11
Changing (optional) remote start melodies .............................................................11
Selecting Melody & Vibrate modes..........................................................................11
Parking Timer & Remote Start Timer.......................................................................11
Anti-Carjacking Protection.......................................................................................... 12
Programming Controllers/Transmitters....................................................................... 13
Programming Features............................................................................................... 13
User Programmable Features .................................................................................... 14
Installer Programmable Features ............................................................................... 18
Programmable Features Matrix.................................................................................. 19

3
THE 2-WAY CONTROLLER
Controller & Transmitter Overview
Controller part number: 152-03
1) Antenna: Sends commands to the
systemandreceivesconrmationsfor2-way
functions.
2) LCD Display:Displaysallcontrollerfunc-
tionsaswellasthestatusofyoursystem.
3) Lock Button
4) Unlock Button
5) Trunk Button
6) 3rd Channel / Start Button
7) Programming Button:Thisisusedfor
settingcontrollerfeatures.
7
1
5
2
Transmitter part number: 1411-03
Call your dealer or visit
www.caralarm.com to order replacement
transmitters.
Transmitter battery replacement:
Removethesmallscrewfromthelower
back case, and separate the transmitter
halves. Replace the one CR2032 batterry
and reassemble the transmitter case.
THE 1-WAY TRANSMITTER
LOCK / ARM: Press and release the “LOCK” button.
• THE SIREN WILL CHIRP & THE PARKING LIGHTS WILL
FLASH ONCE.
• UPON RECEIVING CONFIRMATION FROM YOUR SYS-
TEM, THE CONTROLLER WILL SHOW THE LOCK/ARM
ICON AND BEEP ONCE
NOTE: PRESSING LOCK TWICE IN 5 SECONDS STARTS
THE PARKING TIMER. THE CLOCK WILL CHANGE TO
0:00 AND START COUNTING IN MINUTES & HOURS.
(1-WAY TRANSMITTER: PRESS THE LOCK BUTTON)
3
Controller & Transmitter Functions
4
6
“lock”
button
“3rd Ch”
button
“unlock”
button
“trunk”
button

4
Controller & Transmitter Functions (cont’d)
UNLOCK / DISARM: Press and release the “UNLOCK” button.
• THE SIREN WILL CHIRP TWICE & THE PARKING
LIGHTS WILL FLASH TWICE THEN ILLUMINATE FOR 30
SECONDS.
• UPON RECEIVING CONFIRMATION FROM YOUR
SYSTEM, THE CONTROLLER WILL SHOW THE UNLOCK/
DISARM ICON AND BEEP TWICE.
(1-WAY TRANSMITTER: PRESS THE UNLOCK BUTTON)
TRUNK RELEASE / CHANNEL 2: Press the “ ”buttonfor3
seconds.
• THE SYSTEM WILL DISARM AND THE TRUNK WILL
OPEN (IF EQUIPPED).
• UPON RECEIVING CONFIRMATION FROM YOUR
SYSTEM, THE CONTROLLER WILL PLAY THE TRUNK
RELEASE ANIMATION AND BEEP TWICE
(1-WAY TRANSMITTER: PRESS AND HOLD THE “||” BUT-
TON FOR 3 SECONDS)
3rd CHANNEL: Press and release the “ ” button twice within 5
seconds.(seeuserfeature#21foradditionaloptions)
x2
• YOUR SYSTEM WILL ACTIVATE THE CHANNEL 3
OUTPUT. (IF EQUIPPED & PROPERLY CONFIGURED,
THIS FUNCTION CAN ACTIVATE A FACTORY REMOTE
START)
• UPON RECEIVING CONFIRMATION FROM YOUR
SYSTEM, THE CONTROLLER WILL SHOW THE CHAN-
NEL 3 ICON.
(1-WAY TRANSMITTER: PRESS AND RELEASE THE “|||”
BUTTONS TWICE WITHIN 5 SECONDS)

5
Controller & Transmitter Functions (cont’d)
CHANNEL 4 (IF EQUIPPED): Press and hold the “LOCK” & “ ”
buttonsfor3seconds.
• YOUR SYSTEM WILL ACTIVATE THE CHANNEL 4
OUTPUT.
• THERE IS NO 2-WAY CONFIRMATION FOR THIS
FUNCTION.
(1-WAY TRANSMITTER: PRESS AND HOLD THE LOCK &
“||” BUTTONS FOR 3 SECONDS)
CHANNEL 5 (IF EQUIPPED): Press and hold the “UNLOCK” & “ “
buttonsfor3seconds
• YOUR SYSTEM WILL ACTIVATE THE CHANNEL 5
OUTPUT.
• THERE IS NO 2-WAY CONFIRMATION FOR THIS
FUNCTION.
(1-WAY TRANSMITTER: PRESS AND HOLD THE UN-
LOCK & “|||” BUTTONS FOR 3 SECONDS)
PANIC: Pressandholdthe“LOCK”or“UNLOCK”buttonfor3
seconds.
• THE SIREN/HORN WILL SOUND, THE PARKING
LIGHTS WILL FLASH, AND THE DOORS WILL LOCK OR
UNLOCK DEPENDING WHICH BUTTON IS PRESSED.
(1-WAY TRANSMITTER: PRESS AND HOLD THE LOCK
OR UNLOCK BUTTON FOR 3 SECONDS)
OR

6
1
2
Controller & Transmitter Functions (cont’d)
SILENT ARM / DISARM: Press and release the “ ” button twice in
5 seconds.
• THE PARKING LIGHTS WILL FLASH, AND THE
DOORS WILL LOCK/ARM OR UNLOCK/DISARM DE-
PENDING ON THE CURRENT SYSTEM STATUS.
• UPON RECEIVING CONFIRMATION FROM YOUR
SYSTEM, THE CONTROLLER WILL SHOW THE LOCK/
ARM OR UNLOCK/DISARM ICON.
(1-WAY TRANSMITTER: PRESS RELEASE THE “||” BUT-
TON TWICE IN 5 SECONDS)
x2
AUXILIARY FUNCTIONS 1-4:
 Theactualoperationofthesefunctionswillvaryfromcartocar.Theyaredesigned
tooperateextravehiclefunctionslikeautomaticslidingdoorsormotorizedhatches.
Aux 1-4 are virtual outputs only available on certain vehicles when this system is
integratedwiththevehicle’sdatanetwork.Consultwithyourinstallertondoutifany
ofthesefunctionsareavailableforyourvehicle.Ifso,conrmeachoperationwiththe
controllerandwriteeachfunctionintheblankspacesprovidedbelow.
- Auxiliary 1 Function (___________________):Toactivatethisfunction,press
and release the “trunk” and “III” buttons simultaneously).
- Auxiliary 2 Function (___________________):Toactivatethisfunction,press
and release the “lock” and “trunk” buttons simultaneously).
- Auxiliary 3 Function (___________________):Toactivatethisfunction,press
and release the “unlock” and “III” buttons simultaneously).
- Auxiliary 4 Function (___________________):Toactivatethisfunction,press
and release the “unlock” and “trunk” buttons simultaneously).
SENSOR BYPASS: Press and release the “ ” button within 5 sec-
ondsoflocking/armingthealarmsystem.
• THE SYSTEM WILL GIVE ONE CHIRP TO INDICATE
THE SENSOR IS BYPASSED.
• UPON RECEIVING CONFIRMATION FROM YOUR
SYSTEM, THE CONTROLLER WILL ALSO CHIRP ONCE
& DISPLAY THE SENSOR ICON.
(1-WAY TRANSMITTER: PRESS AND RELEASE THE
“||” BUTTON WITHIN 5 SECONDS OF ARMING THE
SYSTEM)

7
Using The Valet Switch
EMERGENCY OVERRIDE
 Ifyouweretoloseorbreakyourcontroller,you’dneedtoperformanemergency
overridetodisarmthesystemanduseyourvehicle.Todoso,usethefollowingsteps:
STEP 1 - Enter the vehicle (the alarm should sound)
STEP 2 - Turn the ignition key to the “ON” position
STEP 3 - Press the valet switch (located in the window-mount antenna) once
NOTE: Enter your SecureCode at this time if programmed via user feature #1
STEP 4 - Turn the ignition “OFF”.
VALET MODE
ALARM VALET MODE,whileactive,completelydisablesallsecurityfunctions.
Keylessentryisstilloperable.Toentervaletmode,performthefollowingsteps:
STEP 1 - Disarmthesystemeitherwiththecontrollerorbyperforminganemergency
override (make sure not to hold the brake pedal).
STEP 2 - Press and hold the valet switch (located in the window-mount antenna)
for2seconds.ThesystemwillchirponceandtheREDstatuslightwillturnon.The
controllerwillreectthatthesystemisinalarmvaletmode.
SECURECODE
 SecureCodeallowsyoutocustomizethenumberofvaletpressesrequiredtoper-
formanemergencyoverride.Thisisanextralayerofsecuritythatpreventsanyone
fromoverridingthealarmeveniftheyhaveakeytothevehicle.SecureCodehas2
stageswiththerstrequiring1-9buttonvaletpressesandthesecondrequiring0-9
valet button presses. This gives you 99 possible combinations. To program a custom
SecureCode,pleaserefertouserfeature#1.
ToperformanemergencyoverridewithSecureCode,usethefollowingsteps:
STEP 1 - With the system armed, enter the vehicle (the alarm will activate).
STEP 2 - Turn the ignition switch to the “ON” position.
STEP 3 - Within5secondsofstep2,pressthevaletswitchtoentertherstdigitof
your programmed code.
STEP 4 - Afterafewseconds,thesirenwillstopsoundingandchirponce(conrming
stage 1). The siren will then continue sounding.
STEP 5 - Now,within5secondsofstep4,pressthevaletswitchtoenterthesecond
digitofyourcode.Ifthecodeiscorrect,thealarmwilldisarm.
 Ifthecodeisenteredincorrectly,youmustturntheignitionkeyOFF,thenbackON
to try again. Additionally,if2failedattemptsaremade,thealarmwillignoreany
  furtherattemptsfor2minutes.

8
LAST DOOR ARMING
 Thissystemcanbeconguredtoarmautomaticallywhenallthevehicle’sdoors
areclosed(seeuserfeature#2).Whenthisfeatureisutilized,thesiren/hornwillchirp
oncewhenallofthedoorsareclosed.Atthatpoint,itwillstarta30secondcount-
down(indicatedbyafastashingstatuslight).After30seconds,thesystemwillarm
(andlockthedoorsifconguredtodoso).Duringthe30secondarmingdelay,ifa
pointofentryisopened,thecountdownwillpauseuntilallentrypointsareclosed
again.TurningONtheignitionkeywillcancelthelastdoorarmingsequenceuntilthe
keyisturnedoffandthedoorsareallclosedonceagain.
AUTOMATIC REARMING
 Thisautomaticallyrearmsthealarmifthesystemisdisarmedfromtheremote.
(seeuserfeature#3toenable).Whendisarmedbyremote,thesystemwillstarta90
secondcountdown(fastashingstatuslight)toarmthesystem.Thisisusefulifthe
controller may accidentally disarms the system when it’s kept in a purse or pocket
where other items could potentially press the buttons. ENHANCED AUTO REARM
allows you to cancel the countdown by pressing UNLOCK a second time within 5
secondsoftherstpresstodisarmthealarm.
WHEN THE SYSTEM TRIGGERS
 Ifthesystemweretobecompromisedwhilearmed,itwilltriggersoundingthe
siren/hornandashingtheparkinglightsfor30seconds(programmable).Atthispoint
youwillalsobenotiedonthecontrollerastowhichzoneisviolated(ifinrangeofthe
system).Whendisarmingthesystemafteratriggerevent,thesiren/hornwillchirp4
timesandtheparkinglightswillash4timesinsteadofthestandard2times.
LOCK ON TRIGGER:Ifadoorisopenedwhenthesystemistriggered,itwillwait
untilthedoorisclosedagain,thenlockthedoors.Thispatentedfeatureisusefulto
furtherdenyathiefoffurtheraccesstothevehicle.
STORM SAFE MODE: When the system is triggered, pressing the “UNLOCK” button
willstopthealarmfromsoundingbutwillleavethedoorslocked.Thisfunctionisuse-
fulifyouhaveafalsetriggeringsituationduetoviolentweather.
ZONE VIOLATION RECALL:Thesystemiscapableoftellingyouwhichzoneswere
triggeredlast.Thesystem’sstatuslightwillashtoindicatewhichzonewastriggered.
ThisoccursduringthealarmcycleANDafterdisarming.Thesystemwillstorethelast
triggeredzoneuntilthevehicle’signitionkeyisturnedon.See“TheStatusLight”sec-
tionofthismanualforfurtherexplanationofthisfeature.
NUISANCE PREVENTION:Ifthesystemprewarns5timeswithin15minutes,itwill
bypassthezonefortheremainderofthe15minutesbeforerearmingthepre-warn
zone.Additionally,ifafulltriggerzoneisleftopen,thesystemwilltriggeratotalof3
timesbeforebypassingthezone.Oncethezoneisclosedagain,itwillre-armthat
zone.
PRE-WARN DETECTION
 Thissystem’simpactsensorisdesigned,inadditiontodetectingafullimpact,will
warn away potential violators when it detects a light impact to the vehicle. The system
will respond by chirping the siren/horn 3 times and locking the doors. This is very use-
fulwhenanintruderattemptstounlockthedoorwith“slimjim”typesofdevices.
Security System Features

9
The Status Light
The status lights, located in the window-mount antenna, provide a visual indication
ofthesystem’sstatusviaRED(alarmstatus)lights.
SECURITY SYSTEM STATUS (RED LIGHT):
OFF:Thealarmisdisarmedandnotperforminganyautomaticfunctions.
ON CONSTANT: The alarm is in valet mode.
FLASHING SLOW: The alarm is armed and monitoring all entry points.
FLASHING FAST: Oneoftheautomaticarmingfeaturesisinprogress.
AUTOMATIC TRANSMITTER VERIFICATION (RED LIGHT):
Everytimeyouturnontheignitionkey,thestatuslightwillashanumberoftimes
equaltothenumberofcontrollers/transmittersprogrammedtothesystem.This
uniquesecurityfeatureprotectsyoufromapotentialthief(valetattendant,mechanic,
installer,etc.)fromaddingtheirowntransmitterwithoutyourknowledgeandaccess-
ingyourvehicleandit’scontentsatalatertime(theperfectcrime!).
ZONE VIOLATION RECALL:
 Ifthesecuritysystemistriggered,upondisarming,theREDstatuslightswillash
anumberoftimestoindicateexactlywhichzone(s),hasbeenviolated.Itwillstore
thelast2violatedcircuitsandcontinuallyrepeattheashpatternuntilthesystemis
disarmed and the vehicle’s ignition key is turned ON.
2 FLASHES: Hood trigger
3 FLASHES: Door trigger
4 FLASHES: Sensor port trigger

10
 Thecontrollercanoperateupto2differentsystems.Whencontrolling2systems,it
willreceiveallstatusupdatesonthecurrentlyselectedvehicleproleandwillreceive
onlytriggeralertsforthe2ndvehicle.Youcanswitchfromonecartotheotherat
anytimeaswellaschooseauniqueimageforeachvehicle.Usethefollowingstepsto
changevehicles.Seebelowforinfoonchangingthevehicleimage.
SELECTING CAR #1 OR CAR #2
Vehicle #1: Pressthe“P”and“LOCK”buttonsfor1secondtoselectCar#1.The
controller will beep/vibrate once.
Vehicle #2: Pressthe“P”and“UNLOCK”buttonsfor1secondtoselectCar#2.The
controller will beep/vibrate twice.
Multi-Car Operation
Controller Options
 BesuretoselectCAR#1orCAR#2beforebeginningasyoucanhaveadifferent
imageforeachprole.Seeaboveformoreinfo.
1) Pressthe“P”buttonfor5secondstoaccessthecontrollerfeatures.Thecontroller
willbeeptwiceandthebackportionofthevehicleimagewillash.
2) Press the “ “ button to or the “ “ button to scroll to the desired image.
3) Wait 12 seconds to exit programming. The controller will beep once.
CHANGING THE VEHICLE IMAGE
LCD SCREEN ICONS
CAR
Low Battery
Mute/Vibrate
Valet Mode
Channel 3
Channel 2 /
Trunk Release
Hood/Trunk
Trigger
Carjack Mode
Alarm Status (optional)
Remote Start
Shutdown Car 1 or 2 Clock
Remote
Start On
Door Trigger
In Range
(received 2-way
command)
Door Lock
Status
Sensor
Trigger

11
1) Pressthe“P”buttonfor5secondstoaccessthecontrollerfeatures.Thecontroller
will beep twice.
2)Pressandreleasethe“P“buttononcetoselecttheclock(hourdigitswillash).
3) Press the “ “ button to scroll up or the “ “ button to scroll down.
4) Press the “P” button to switch to the minute digits.
5) Press the “ “ button to scroll up or the “ “ button to scroll down.
6) Wait 12 seconds to exit programming. The controller will beep once.
SETTING THE CLOCK
 Whenthesystemisconguredwithanoptionalremotestart,thecontrollerhas5
differentmelodiestochoosefromforremotestartONand5melodiesforremotestart
OFFconrmation.
1) Pressthe“P”buttonfor5secondstoaccessthecontrollerfeatures.Thecontroller
will beep twice.
2) Press and release the “P“ button 3 times to select the melody settings. The clock
willchangeto“S1”indicating“startmelody#1”fortheremotestartONmelody.
3) Press the “ “ button or the “ “ button to scroll through the melodies.
4) Press the “P” button to switch to the remote start OFF melody selection.
5) Press the “ “ button or the “ “ button to scroll through the melodies.
6) Wait 12 seconds to exit programming. The controller will beep once.
CHANGING (OPTIONAL) REMOTE START MELODIES
Controller Options (cont’d)
SELECTING MELODY & VIBRATE MODES
 Whenever2-wayalertsarereceivedfromthesystem,thecontrollercanalertyou
withamelody,vibration,orboth.Bydefault,thecontrollerissetformelodyonly.
Press the “P” and “ “ buttons simultaneously for 2 seconds to change the
setting.The“MUTE”(vibrate)icononthestatusscreenwillturnon&offindicating
your selection.
Thecontrollerhas2convenienttimerfunctions.ThePARKINGTIMERtellsyou
how long you’ve been parked in case you are at a parking meter or other parking
areas with time restrictions. The REMOTE START TIMER tells you how long your
engine has been running in remote start mode.
PARKING TIMER: Press LOCK twice within 5 seconds. When the controller receives
bothLOCKconrmations,itwillstartthetimer.
REMOTE START TIMER (requires an optional remote start module): This turns on
every time you remote start.
Note: Pressing the “P” during either timer mode will switch between the timer
and clock.
PARKING TIMER & REMOTE START TIMER

12
Anti-Carjacking Protection
 ThesystemhassthreeseparateAnti-Carjackingprotectionfeatures(ignition,open
door, or by the transmitter). All three are programmable, and must be turned on to
operate. Once activated, the user has 53 seconds to cancel the Anti-Carjacking pro-
tection process by pressing the Valet Switch once.IfAnti-Carjackingisnotcancelled,
53secondsafterbeingactivatedthesirenwillbegintochirpfor7secondstoalertthe
user that the system is about to enter into an alarm condition. The Valet Switch may
still be pressed once during this period to cancel the Anti-Carjacking process.
 IftheAnti-Carjackingprocessisnotcancelledbeforethe60seconds,thesystem
willenteranalarmcondition.30secondsafterthisoccurs,orshouldtheignitionbe
turnedoffinthemeantime,thestaterinterruptwillengage.It will not respond to the
transmitter at this time, nor will the system reset. It can only be disengaged by:
Step 1Turningthevehicle’signitionoff.
Step 2 Turning the ignition back on.
Step 3 Within5seconds,performanEmergencyOverrideusingtheValetSwitch.If
theSecureCodehasbeencustomized,thecorrectnumberofValetSwitchpresses
must be made.
ThethreetypesofAnti-Carjackingprotectionfeaturesare:
Ignition Activated Anti-Carjacking activates every time the vehicle’s ignition is
turnedon.TheValetSwitchmustbepressedwithin60secondsofactivatingtocan-
cel Anti-Carjacking. This is User Programmable Feature #17.
Door Anti-Carjacking activateswhenadoorisopenedafterthevehicleisstarted
andtheengineisrunning.TheValetSwitchmustbepressedwithin60secondsafter
activation to cancel Anti-Carjacking. This is User Programmable Feature #18.
Transmitter Anti-Carjacking is activated by pressing and holding the “CH3” button
(1-waytransmitter:“trunk&“start”)for3seconds,whilethevehicle’signitionison.
TheValetSwitchmustbepressedwithin60secondsafterthisisdonetocancelAnti-
Carjacking. This is User Programmable Feature #19.

13
IftheUnauthorizedTransmitterAlertfeatureison,programmingatransmittertothe
system will activate the “UTA” warning and the extended Status Light indication. For
thenext48hours,thesiren/hornwillsoundabriefseriesofchirpseverytimethe
vehicle’s ignition key is turned on.
Special Programming procedure to turn on the UTA feature: Using this method
toprogramtransmittersoroptionalcontrollers,andtoturnontheUnauthorizedTrans-
mitterAlertfeature.
Follow the same steps as the Standard Programming, but on any transmitter/con-
trollerbeingprogrammedinsteadofpressingthe“lock” button, press the “lock” and
the “unlock” buttons together. This action turns ontheUnauthorizedTransmitter
Alertfeatureandatthesametimeprogramsthetransmitterorcontrollertooperate
the system.
 OncetheUnauthorizedTransmitterAlertfeatureisturnedon,thewarningwill
soundfor48hoursafteranytransmitterprogramming,includingtheprogramming
sessionwhichwasusedtoturniton.Thisfeaturecanonlybeturnedoffagainby
sendingthesystembacktoOmegaforareset.
Step 1 Turn the ignition key “ON”, then “OFF”
Step 2Within5secondsofstep1,pressthevaletswitch5timestoaccessuser
feature.
~ The siren/horn will sound and the status light will turn on.
Step 3Within10secondsofstep2,pressthevaletswitchthenumberoftimescor-
respondingwiththedesiredfeature’snumber.
 ~Thesiren/hornwillchirp,thestatuslights,andtheparkinglightswillashequal
 totheselectedfeature.
Step 4Changethefeaturebypressingthetransmitterbuttonthatcorrespondswith
the desired setting. The siren/horn will chirp to correspond with the chosen setting.
NOTE:Thesystemwillautomaticallyexitprogrammingmodeif10secondspasses
without any activitiy. Or, you can turn on the vehicle’s ignition key to exit program-
ming.
Programming Features
Standard Programming: Using this method to program additional or replace-
menttransmittersdoesnotturnonorotherwiseaffecttheUnauthorizedTransmitter
Alert(UTA)feature.Beforeyoubegin,havealltransmitterswhicharetooperatethe
systemathandandmakesurethecorrectvehicleprole(seepage12)isselectedon
the controller(s).
Step 1 Then, turn the ignition “on”.
Step 2 Within5secondsofStep1,presstheValetSwitch5times.Thesiren/hornwill
brieysound,conrmingthatthesystemisreadytolearnatransmittercode.
Step 3 Press the “lock” button on each transmitter one at a time. The system will
chirpthesiren/hornoncetoconrmthateachwaslearned.Ifacodeisnotreceived
within10secondsofStep2,thelearningprocesswillautomaticallyexit.
Programming Controllers/Transmitters

14
User Programmable Features
To custom program a new SecureCode:
Step 1 Follow Steps 1 to 4 in the previous “Programming Features” section to access
“feature#1”.
Step 2 Within 10 seconds slowly press and release the controller or transmitter’s
“arm/lock”buttonthenumberoftimesequaltothedesiredSecureCodeforstage1,
allow the system to respond to each controller/transmitter button press with a siren
chirpbeforepressingthebuttonagain.Afewsecondsafterthenalbuttonpress,the
systemwillchirpthehorn/sirenconrmingthetotalnumberforstage1.
Step 3Congurestage2oftheSecureCodebypressingandreleasingthe“disarm/
unlock”buttonthenumberoftimesdesiredforthestage2.Thesystemwillconrm
asitdidforstage1.
Feature #2 - Last Door Arming
Off (press “arm/lock” button to program) - DEFAULT
On w/o doors locking (press “disarm/unlock” button to program)
On w/ doors locking (press “trunk” button to program)
“LastDoorArming”hasthesystemautomaticallyarmitselfeverytimeyouexitthe
vehicle(thecompleteoperationisdescribedonpage8).Thisfeatureturnsthatop-
erationonoroff,andwithoptionsofhavingLastDoorArmingoperatewithorwithout
also locking the doors when the system does arm.
Feature #1 - SecureCode
DEFAULT - 1 Press
SecureCodeisauniquepatentedfeaturewhichallowsyoutocustomselectthenum-
berofValetSwitchpressesintwostages,insteadofasingle“1press”,whichwould
berequiredinordertoperformanEmergencyOverride.Ifanyofthethreeanti-car-
jackingfeaturesareutilized,acustomizedSecureCodewouldalsoberequiredtoturn
itoffonceitisfullyactivated.TheSecureCodeoperationisdescribedonpage10.
Feature #3 - Automatic Rearming
Off (press “arm/lock” button to program) - DEFAULT
On w/o doors locking (press “disarm/unlock” button to program)
On w/ doors locking (press “trunk” button to program)
“AutomaticRearming”,describedonpage9,rearmsthealarmifaccidentallydis-
armed. Options are to have Automatic Rearming operate with or without also locking
the doors when the system does rearm.
Feature #4 - Starter Interrupt Functions
Alarm Only (press “arm/lock” button to program) - DEFAULT
Off (press “disarm/unlock” button to program)
Automatic (press “trunk” button to program)
Alarm Only - The Starter Interrupt is operable whenever the alarm is armed.
Automatic - This will cause the Starter Interrupt output to automatically engage 90
secondsaftertheignitionswitchisturned“off”,andafterdisarmingthesystem.
Off - Completely eliminates the Starter Interrupt output,

15
Feature #5 - Ignition Activated Override
Off (press “disarm/unlock” button to program) - DEFAULT
On (press “arm/lock” button to program)
Thisfeatureallowsanactivatedsystemtobeoverriddenanddisarmedbysimply
turningtheignitionswitchonwithin10secondsofthesystem’sactivation.After10
seconds,theEmergencyOverridemustbeperformed.
User Programmable Features (cont’d)
Feature #6 - Doors Lock With Ignition On
On (press “arm/lock” button to program) - DEFAULT
Off (press “disarm/unlock” button to program)
Thisfeatureconguresthesystemtoautomaticallylockthevehicle’sdoorseverytime
that the ignition switch is turned on.
Feature #8 - Open Door Bypass of Ignition Locking
On (press “arm/lock” button to program) - DEFAULT
Off (press “disarm/unlock” button to program)
Thisfeaturecancelstheautomaticlockingor unlockingofthevehicle’sdoorsifoneof
thedoorsisopenwhentheignitionswitchisturnedonoroff.
Feature #7 - Doors Unlock With Ignition Off
On (all doors will unlock)* (press “start” button to program) - DEFAULT
Off (press “arm/lock” button to program)
Driver’s Door Only* (press “disarm/unlock” button to program)
All Doors Except Driver’s Door* (press “trunk” button to program)
Thisfeaturecontrolstheunlockoperationswhentheignitionkeyisturnedoff,andit
hasmoreoptionsbecauseofthesystem’smultipleunlockingoutputs.
 *Thedriver’sdoorunlockingdifferentlyfromtheotherdoorsmustbecong-
ured when the system is installed!
Feature#9-ConrmationChirps
On (press “arm/lock” button to program) - DEFAULT
Off (press “disarm/unlock” button to program)
Chirps Except In Valet Mode(press “trunk” button to program)
Chirps in Valet Mode Only (press “start” button to program)
Thisfeatureremovesthesystem’sarminganddisarmingconrmationchirpsfor
particularfunctions.
Feature#10-ConrmationChirpVolume
Medium High (press “trunk” button to program) - DEFAULT
Low (softest) (press “arm/lock” button to program)
Medium Low (press “disarm/unlock” button to program)
High (loudest) (press “start” button to program)
Thisfeatureallowsthechoiceoffourdifferentvolumelevelsofthesystem’sconrma-
tionchirps,andwhenprogrammingit,thebuttonscanberepeatedlyandsequen-
tially pressed, thus making it easy to hear and choose the setting with the best chirp
volume.

16
Feature #11 - Alarm Duration
30 Seconds (press “arm/lock” button to program) - DEFAULT
60 Seconds (press “disarm/unlock” button to program)
90 Seconds (press “trunk” button to program)
120 Seconds (press “start” button to program)
ThisfeatureallowsfourchoicesoftheAlarmDuration,whichistheperiodoftimefor
whichthesystemsoundingthesiren(and/orhorn,optionally)andashestheparking
lights when it is triggered. Caution: Before lengthening the Alarm Duration you
should always check and determine if there are any local anti-noise or nuisance
ordinances in your area, to avoid the possibility of receiving a violation citation.
User Programmable Features (cont’d)
Feature #12 - Parking Light Illumination Upon Disarm
On (press “arm/lock” button to program) - DEFAULT
Off (press “disarm/unlock” button to program)
Thisfeatureaffectstheparkinglightoperationwhenthe system is disarmed. When
thisfeatureisturnedon,theparkinglightsashtwice,andthenturnbackonforexter-
nalilluminationfor30secondsunlesstheignitionkeyisturnedonduringthattime.If
thisfeatureisturnedoff,theparkinglightsashtwiceonly,anddonotilluminate.
Feature #13 - 2nd Channel Also Disarms System
On (press “arm/lock” button to program) - DEFAULT
Off (press “disarm/unlock” button to program)
“2ndchannel”ismostcommonlyusedfortrunkrelease,inwhichcasethealarm
shouldalsodisarm.Thisfeature,turnedon,conguresthesystemtodisarmwhen
the 2nd channel is used.
Feature #14 - Arming Delay
3 Seconds (press “arm/lock” button to program) - DEFAULT
15 Seconds (press “disarm/unlock” button to program)
30 Seconds (press “trunk” button to program)
45 Seconds (press “start” button to program)
Whenthesystemisarmed,thereisabriefperiodoftimeinwhichanalarmtrigger
cannot occur. This Arming Delay allows the system to completely process its sensory
parameters,whichallowthevehicletostabilize.Insomecasesmoretimeisneeded
thanthefactory-set3seconds,andthisfeatureoffersthreelongerdelayoptions.
Feature #15 - Steady Siren or Pulsed Horn
Steady Siren (press “arm/lock” button to program) - DEFAULT
Pulsed Horn Low (press “disarm/unlock” button to program)
Pulsed Horn Medium (press “trunk” button to program)
Pulsed Horn High (press “start” button to program)
Thisfeatureselectstheoperationoftheprimarysirenoutputwhenthealarmistrig-
gered.Itcanbeconguredfor3pulsespeedsiftheoutputisusedtohonkthehorn.
Feature #16 - Alarm Functions Bypass
Off (press “disarm/unlock” button to program) - DEFAULT
On (press “arm/lock” button to program)
ThisfeatureconvertsthesystemintoastrictlyKeylessEntry/ConvenienceSystemby
eliminatingallantitheftalarm-orientedoperationsandfeatures.

17
Feature #17 - Ignition Activated Anti-Carjacking Protection
Off (press “disarm/unlock” button to program) - DEFAULT
On (press “arm/lock” button to program)
ThisformofAnti-Carjackingisinitiatedbytheignitionkeybeingturnedon.TheAnti-
Carjacking protection, and the three ways to initiate it are described on page 14.
Feature #19 - Remote Activated Anti-Carjacking Protection
Off (press “disarm/unlock” button to program) - DEFAULT
On (press “arm/lock” button to program)
ThisformofAnti-Carjackingisinitiatedbyactivatingthe3rdchannelfromthecontrol-
ler or transmitter. The Anti-Carjacking protection, including the three ways to initiate it
are described on page 14.
Feature #18 - Door Activated Anti-Carjacking Protection
Off (press “disarm/unlock” button to program) - DEFAULT
On (press “arm/lock” button to program)
ThisformofAnti-Carjackingisinitiatedbyadoorbeingopened.TheAnti-Carjacking
protection, including the three ways to initiate it are described on page 14.
Feature #20 - Open Door Warning Upon Arming
Off (press “disarm/unlock” button to program) - DEFAULT
On (press “arm/lock” button to program)
Whenthisfeatureisturnedon,ifoneofthevehicle’sdoorsisopenatthetimethat
the system is armed via the controller or transmitter, the siren will chirp 3 times and
theparkinglightswillash3timesinsteadofonce.
User Programmable Features (cont’d)
Feature #21 - Button “III” function
3rd Channel (press “arm/lock” button to program) - DEFAULT
Panic (press “disarm/unlock” button to program)
4th Channel (press “II” button to program)
5th Channel (press “III” button to program)
Thisfeaturechangeshowthesystemrespondstopressingthe“III” button on the
controllers.

18
Installer Programmable Features
Feature #23 - (-) WHITE/BLACK Wire Function
OEM Arm Pulse (press “arm/lock” button to program)
Flashing Light Output (press “disarm/unlock” button to program) - DEFAULT
4th CH. Latching (press “trunk” button to program)
4th CH. Pulsed/On Demand (press “start” button to program)
Theprimaryfunctionofthiswire,istooperatethevehicle’snegativeparkinglightcircuit(if
required)Optionally,ifdesiredorneeded,thisoutputcanbeprogrammedforOEMarmpulse,4th
Channel latching output, or 4th Channel pulsed/on demand output.
Feature #22 - Doorlocking Functions
0.8 Second Outputs (press “arm/lock” button to program) - DEFAULT
3 Second Outputs (press “disarm/unlock” button to program)
Double Pulse Unlock Output (press “trunk” button to program)
Total Closure Lock Output (press “start” button to program)
Thissinglefeaturegivestheinstallerseveralneededoptions,tomatchthesystem’sdoorlocking
outputstosuitedifferentvehiclerequirements.Thetotalclosuresettingprovidesa28secondlock
pulse and a 0.8 second unlock pulse.
ThisgroupofInstallerProgrammableFeatureshaveadirectaffectuponthesystem’sopera-
tions related to the installation and vehicle type AND SHOULD ONLY BE CHANGED BY THE
INSTALLER!!!
Feature #24 - (-) BROWN/BLACK Wire Function
OEM Disarm Pulse (press “arm/lock” button to program)
Horn Honk Output (press “disarm/unlock” button to program) - DEFAULT
5th CH. Latching (press “trunk” button to program)
5th CH. Pulsed/On Demand (press “start” button to program)
Theprimaryfunctionofthiswire,istooperatethevehicle’snegativehornhonkcircuit(ifdesired)
Optionally,ifdesiredorneeded,thisoutputcanbeprogrammedforOEMdisarmpulse,5thChan-
nel latching output, or 5th Channel pulsed/on demand output.

19
Programmable Features Matrix
User Feature Programming: Ignition on, off, press valet 5 times, press valet # of times equal to the feature #
# Feature Lock Button Unlock button Trunk button ”START” button
1 Secure Code 1, 0 (default)
2 Last Door Arming Off On w/o lock On w/ Lock
3 Automatic Rearming Off On w/o lock On w/ Lock
4 Starter Interrupt Functions Alarm Off Automatic
5 Ignition Override On Off
6 Lock w/ Ignition On On Off
7 Unlock w/ Ignition Off Off Unlock #1 Unlock #2 Unlock #1 & #2
8 Open Door Bypass For Ign. Locks On Off
9 Conrmation Chirps On Off Except Valet mode Valet Mode Only
10 Chirp Volume Low Med Low Med Loud Loud
11 Alarm Cycle 30 sec 60 90 120
12 Lights Upon Disarm On Off
13 Disarm Upon Trunk Release On Off
14 Arming Delay 3 sec 15 30 45
15 Siren Output Steady Pulse Horn Lo Pulse Horn Med Pulse Horn Hi
16 Alarm Functions Bypass On Off
17 Ignition Anti-carjack On Off
18 Door Anti-carjack On Off
19 Remote Anti-carjack On Off
20 Open Door Warning On Arm On Off
21 “III” Button Function 3rd Channel Panic 4th Channel 5th Channel
Installer Features
22 Doorlock pulse 0.8 sec 3 sec Double unlock Total closure
23 (-) WHITE/BLACK wire Functions OEM Arm Parking lights 4th CH. Latching 4th CH. Pulsed
24 (-) BROWN/BLACK wire Functions OEM Disarm Horn Honk 5th CH. Latching 5th CH. Pulsed

Back Cover
Color cover is in a
separatele.