Excalibur AL-560 User manual

AL-560
REMOTE KEYLESS ENTRY & SECURITY SYSTEM
Installation Guide
January 27th, 2016
Temporary cover. Color cover is in a separate le.

Arming: Press & Release the “Lock” button
Silent Arming: Press & Release the “3rd” button Twice in 3 sec.
Disarming: Press & Release the “Unlock” button
Silent Disarming: Press & Release the “3rd” button Twice in 3 sec
Page 1
Remote Control Quick Reference Guide
THE SIREN WILL
CHIRP ONCE
THE PARKING LIGHTS
WILL FLASH ONCE
THE DOORS WILL LOCK
(IF CONNECTED)
THE PARKING LIGHTS
WILL FLASH ONCE
THE DOORS WILL LOCK
(IF CONNECTED)
THE SIREN WILL
CHIRP TWICE THE PARKING LIGHTS
WILL FLASH TWICE
THE DOORS WILL UNLOCK
(IF CONNECTED)
THE PARKING LIGHTS
WILL FLASH TWICE
THE DOORS WILL UNLOCK
(IF CONNECTED)
Table Of Contents
Owner’s Guide
Arming the System ....................... 3
Disarming the System ................. 4
Emergency Override .................... 4
System Armed & Activated ........... 5
Panic ............................................ 5
Sensor By-Pass ........................... 5
Auxiliary Channel ......................... 6
3rd Channel ................................. 6
Remote Controlled Anti-Carjack .. 6
Anti-Carjacking ............................ 7
Valet Mode ................................... 8
LED Status Indicator .................... 8
Auxiliary Sensor & Prewarn ......... 9
Installation Instructions
How To Program Remote Control ............. 9
How To Program Features ...................... 10
Programmable Features .................. 10 - 12
RFID Anti Hijacking ............................ 13-15
Wiring Diagram ........................................ 16
Door Lock/Unlocking Systems ................ 17
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions, (1)
This device may not cause harmful interference and,
(2) This device must accept any interference received,
including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modi cations to
this equipment. Such modi cations could void the user’s
authority to operate the equipment.
2 X
2 X

To Activate the Auxiliary Channel:Press & Hold The “3rd” Button
for 3 Seconds
To Activate the 3rd Channel: Press & Hold The “4th” Button for 3
Seconds
To Activate Remote Anti-Carjack:
Press & Hold the “4th” button, for 3 Secs, with
the ignition “On” (programmable feature # 10)
Emergency Override:
Panic: Press & Hold the “Lock” Button for 3 Sec’s, with the ignition “Off”
Shock Sensor & Prewarn Bypass:
1) Arm the alarm by, Pressing & Releasing the “Lock” button
2) Within 2 seconds Press & Release the “3rd” button.
Page 2
Then
1.2.
Operate Remote Start Unit
Operate Window Roll-Up Unit
Open Electric Trunk
Operate Window Roll-Up Unit
Operate Remote Start Unit
THEN WITHIN
10 SECONDS
PRESS & RELEASE
VALET BUTTON
THE SIREN WILL SOUND THE PARKING LIGHTS
WILL FLASH
Hold 3 seconds
Hold 3 seconds
Hold 3 seconds
Hold 3 seconds
for 3 Seconds
Seconds

The system may be “Armed” by any of 3 methods:
1) Remote Control Arming: Press & Release the “Lock” button
Page 3
Arming the Alarm
Upon Arming: • The siren will chirp one time. (3 times if there is open zone)
• The parking lights will  ash once.
• The doors will lock. (If an optional interface is connected)
• The starter interrupt will engage.
• The LED Status Indicator will begin to  ash slowly.
- If a zone is open, (for example a car door), when arming, the alarm will still arm,
but will bypass the open zone until the zone is secured (siren will chirp 3 times).
3) To Passively Arm:Turn Ignition “Off”, Then Close all Doors.
Automatic “Last Door Arming” is a programmable feature which allows the alarm
to arm itself and, if desired, lock the doors upon arming.
If on, anytime the ignition is turned off, and then a door is opened and closed:
• The Siren will chirp once to con rm arming countdown has begun.
• The LED Status Indicator will begin to  ash rapidly.
Thirty seconds later:
• The siren will chirp & the lights will  ash once.
• The LED Status Indicator will begin to  ash slowly.
• The starter interrupt will engage.
- The alarm is now fully armed. The doors will lock at this time, if programmed
to do so, and if the vehicle is equipped.
- The system can not Last Door Arm if a protected zone is open. Should a vehicle
door be opened during the arming countdown, the countdown will stop and start
over again when the door is closed.
AUTO REARM (programmable) allows the Alarm to Rearm itself, if it is Disarmed.
2) SILENT Remote Control Arming: Press & Release the “3rd” button
Twice within 3 seconds
THE SIREN WILL
CHIRP ONCE THE PARKING LIGHTS
WILL FLASH ONCE
THE DOORS WILL LOCK
(IF CONNECTED)
THE PARKING LIGHTS
WILL FLASH ONCE
THE DOORS WILL LOCK
(IF CONNECTED)
2 X
Twice within 3 seconds

The system may be “Disarmed” by any of 3 methods:
1) Remote Control Disarming: Press & Release the “Unlock” button
2) SILENT Remote Control Disarming: Press & Release the “3rd”
button Twice within 3 sec
Upon Disarm: • The siren will chirp twice. (4 chirps if alarm has activated & reset)
• The parking lights will  ash twice. (4 times if alarm has activated)
• The doors will unlock. (If an optional interface is connected)
• The starter interrupt will disengage.
• The LED Status Indicator begins  ashing rapidly for Automatic
Rearming, until alarm Rearms or a vehicle door is opened.
2-STAGE DISARM: If Disarming the alarm while it is triggered (siren sounding),
the  rst press of any remote control button will only silence the siren/horn. A
second press of the “Unlock” button will Disarm the alarm.
IMMOBILIZER MODE: If this mode is programmed “On”, the starter interrupt will
remain engaged after the alarm is Disarmed, until the ignition is turned “On” and
you Press & Release the Valet button. (Refer to programmable feature #5)
To Start Vehicle:
1. Disarm the alarm, then Turn “On” the vehicle’s ignition
2. Press & Release the Valet Button.
Step 1: With the system in the armed condition, enter the vehicle via the driver’s
door (be aware that the alarm will trigger when the door is opened).
Step 2: Using your key, turn the vehicle’s ignition to the “On” position.
Step 3: Within 10 seconds, Press & Release the Valet/ Override Switch.
Page 4
Disarming the Alarm
Emergency Override
THEN WITHIN
10 SECONDS
THE PARKING LIGHTS
WILL FLASH TWICE
THE DOORS WILL UNLOCK
(IF CONNECTED)
THE SIREN WILL
CHIRP TWICE THE PARKING LIGHTS
WILL FLASH TWICE
THE DOORS WILL UNLOCK
(IF CONNECTED)
2 X
button Twice within 3 sec

Regardless of method used toArm the alarm, onceArmed, the alarm will monitor
all protected zones, and if an intrusion attempt is detected it will activate, or
“trigger”.
A trigger consists of the following:
• The electronic siren, or optionally the vehicle’s horn, will start sounding.
• The exterior parking lights will  ash on and off repeatedly.
An activation has a 30 second duration unless the system is disarmed using the
remote control or the Valet /Override switch. If all protected zones are secure
at the end of the trigger, the system will stop and rearm itself to detect further
entry attempts. If a protected zone is still open at the end of the trigger cycle,
the alarm will continue to re-trigger itself for up to six activated cycles before it
resets itself and ignores the violated zone.
Should it be needed in a threatening situation, or you feel the need to attract at-
tention, the alarm can be triggered using the remote control. Your alarm features
“Panic Mode”, which allows you to activate “Panic” from the “Arm/Lock” button.
To Activate Remote Panic: Press & Hold the “Arm/Lock” Button,
for 3 seconds, with the ignition “Off”.
The shock sensor & Prewarn zone can be by-passed using the remote
control. This may be useful in stormy weather.
1) Arm the alarm by, Pressing & Releasing the “Lock” button.
2) Within 2 seconds, Press & Release the “3rd” button.
- The siren will chirp once to con rm sensor has been by-passed.
- Upon Disarming the alarm, the sensor zone will reset.
Sensor By-pass
System Armed & Activated
Remote Panic Operation
Page 5
Then
1.2.
THE SIREN WILL SOUND
THE PARKING LIGHTS
WILL FLASH
Hold 3 seconds

The Auxiliary Channel may be used to operate an optional function. Pos-
sibilities include remote trunk release, remote car starting, or an on-demand
remote window roll-up interface. Please see your Omega dealer for details
on available options.
To Activate the Auxiliary Channel:
Press & Hold the “3rd” Button for 3 Seconds.
- The alarm will Disarm upon activating the Auxiliary channel.
- The Auxiliary Channel cannot be activated if the vehicle’s ignition is “On”.
The programmable 3rd Channel may be used to operate an optional function,
such as a remote start unit or an on-demand remote window roll-up interface.
Please see your Omega dealer for details on available options.
To Activate the 3rd Channel:
Press & Hold the “4th” button for 3 Seconds.
- The 3rd Channel can be programmed to Supply a (-) output when the alarm
is Armed to operate a Window Roll-Up module (Programmable feature #12).
The Anti-Carjacking mode can be activated using the remote control.
- Refer to next page for sequence details. (programmable feature # 10)
To Activate Remote Anti-Carjack:
Press & Hold The “4th” Button, For 3 Seconds, With The Ignition “On”.
Hold 3 seconds
Page 6
The Auxiliary Channel
Remote Anti-Carjack
The 3rd Channel Auxiliary Output
Hold 3 seconds
Operate Remote Start Unit
Operate Window
Roll-Up Unit
Open Electric Trunk
Operate Window
Roll-Up Unit
Operate Remote Start Unit

Page 7
The Anti-Carjacking sequence may be activated by any of 3 methods:
1) Using the remote control, by holding down the Small “4th” Button for
3 seconds while the ignition is “On”. (programmable feature #10)
2) When a door is Opened while the ignition is “On” (programmable feature #10)
3) Every time the ignition is turned “On”. (Programmable feature #9)
1)Anti-Carjacking activated using the transmitter: (programmable feature #10)
The Anti Car-Jacking operation may be activated by pressing and holding the
remote control’s Small “4th” button for 3 seconds while the ignition is “On”.
2) Anti-Carjacking activated by an Open door: (programmable feature #10)
If programmable feature #10 is “On”, the system will initiate the Anti-Carjacking
sequence every time a vehicle door is opened while the ignition is “On”.
3) Anti-Carjacking activated by the ignition: (programmable feature #9)
If programmable feature #9 is “On”, the system will initiate the Anti-Carjacking
sequence every time the vehicle’s ignition is turned “On”.
IMMOBILIZERMODE: If the “Immobilizer mode” is programmed “On”, the igni-
tion activated anti-carjacking sequence will be cancelled and the “Immobilizer
mode” disarmed by: rst turning “On” the vehicle’s ignition, then Pressing &
Releasing the valet button. (Refer to programmable feature #5)
Once the Anti-Carjacking sequence has begun, the user has 59 seconds to
press the Valet/Override Switch in order to cancel the sequence.
ORDER OF ANTI-CARJACKING SEQUENCE:
- For rst 20 seconds after the sequence has begun there are no signs.
- From 21-30 seconds, the LED will blink slowly.
- From 31-45 seconds, the LED will blink fast and the siren/horn will chirp
once every 2 seconds.
- From 46-60 seconds, the LED will blink fast and the siren/horn will chirp
once per second.
- If not cancelled yet, at 61 seconds the alarm will trigger.
In the triggered condition:
- The siren/horn will sound & The parking lights will ash.
- The starter interrupt will engage.
NOTE: Once the Anti-Carjack mode is triggered, the remote control will NOT
stop the operation, nor will the system reset automatically. Once it is trig-
gered, the Anti-Carjacking operation can only be deactivated by:
1) Turning the vehicle’s ignition “Off”.
2) Turning the vehicle’s ignition back “On”.
3) Within 10 seconds, Press & Release the Valet button.
Programmable Anti-Carjacking Protection

Page 8
Valet Mode
Valet Mode can only be entered into while the alarm is Disarmed.
Valet Mode turns off all of the alarm’s security features, (including Anti-Carjack).
Valet Mode is designed for situations in which it is not convenient for the security
portion of the alarm to be operational; for example during extended stopovers
for vehicle servicing, loaning others your vehicle, maintenance, valet parking,
washing, etc. The convenience features such as keyless entry will still operate.
To Enter Valet Mode (Alarm MUST be Disarmed):
Press & Hold the Valet Switch for 3 Seconds.
- The LED Status Indicator will light solid and the siren will emit a long chirp
to conrm entry into Valet Mode. Now the system cannot become Armed.
- The vehicle’s ignition may be “On” or “Off” when entering Valet Mode.
- To remind you its in Valet Mode ,The siren will chirp every time the vehicle’s
ignition is turned “Off”
To Exit Valet Mode: Simply Press & Release the Valet Switch.
- The LED will turn off and the siren will emit a long chirp to conrm that the
system has exited Valet Mode. Normal arming operations may be resumed.
- The vehicle’s ignition may be “On” or “Off” when exiting Valet Mode.
The LED Status Indicator visually shows the status of the alarm and also
provides a high level of visual deterrence. The LED Status Indicator Light is
normally mounted where it can be seen by the driver, as well as from outside.
Security System Status: The primary function of the LED Status Indicator
Light is to indicate the normal operating status of the security system:
Off = The system is disarmed and not performing any automatic functions.
On Constant = The system is in the Valet Mode.
Flashing Slow = The system is fully Armed.
Flashing Fast (while Disarmed) = Last Door Arming or Automatic Rearming.
Zone Violation: Once alarm is Disarmed, LED will show which zone triggered
alarm until the ignition is turned “On” (this clears unit’s memory).
2 ash & pause = Pin-Switch zone triggered alarm.
3 ash & pause = Door zone triggered alarm.
4 ash & pause = Sensor zone triggered alarm.
Automatic Transmitter Verication: For the rst 10 seconds after the vehicle’s
ignition is turned “On”, the LED Status Indicator will ash a number of times equal
to the number of remote control transmitters which are programmed to operate
the alarm. This indication can be from 1 Flash /pause up to 4 Flashes /pause, as
the system can be operated by just one, or as many as 4 remote transmitters.
The LED Status Indicator

Page 9
Auxiliary Sensor: This security system is equipped with a plug-in port for an
optional sensor to increase the effectiveness of the system. The comprehensive
line of optional sensors offered is comprised of impact sensors, glass tampering
sensors, and microwave/radar sensors which can detect motion inside and
outside the vehicle.
Prewarning Detection: This circuit requires connection to a dual zone sensor
or detection device. When the sensor’s prewarn zone is triggered the siren will
emit a series of chirps.
To program remote controls to operate the alarm:
Step 1: Turn “On” the vehicle’s ignition.
Step 2: Within 7 seconds press the Valet/Override Switch 5 times. The alarm
will wolf the siren once to conrm entry into Remote Control Programming Mode.
Step 3: Within 10 seconds, press any Button on each remote to be programmed.
The siren will chirp to conrm each time a remote has been programed.
If 10 seconds expire without any programming activity, or if the vehicle’s ignition
is turned “Off”, the system will automatically exit Remote Control Programming
Mode. The siren will emit 2 long chirps to conrm exit.
NOTE: Up to 4 remote controls can be programed to operate the alarm. When-
ever a remote control, new or existing, is programmed to the alarm, all existing
codes are erased for security. So all remote controls which are to operate the
alarm, must be programmed in at the same time.
ImmobilizerMode:Immobilizer mode must be disarmed before entering remote
control programming mode. (refer to programmable feature #5)
1. Turn “On” ignition
2. Press & Release the Valet/Override button, (siren will chirp twice)
3. Press valet/override button 5 times to enter remote control programming mode.
ATV: The LED Status Indicator will show the number of programmed remote
control transmitters for 10 seconds after the vehicle’s ignition is turned On.
As the instructions above show, programming extra transmitters to any vehicle
security system is easy; the exclusive patented ATV feature protects against
someone programming their own transmitter to operate your system.
Auxiliary Sensor & Prewarning
How to Program Remote Controls to the Alarm

Page 10
To access Features Programming Mode:
Step 1: Turn the vehicle’s ignition “On” then “Off”.
Step 2: Within 7 seconds of turning the ignition “Off”, press the Valet Switch
5 times. The siren will wolf once conrming entry to Features Programming
Mode.
Step 3: Within 10 seconds of entering Features Programming Mode, press
the Valet Switch the number of times equal to the number of the feature to be
programmed. The siren will repeat the feature number with chirps to conrm.
Step 4: After the system acknowledges the feature to be programmed:
- press the “Lock” button on the remote to turn the feature “ON” (the siren will
chirp once), or,
- press the “Unlock” Button to turn feature “OFF” (siren will chirp twice).
Note: Once the feature to be programed is selected, you can toggle the
feature between its settings by pressing the “Lock” & “Unlock” buttons
on the remote control.
- To program more features, simply repeat Steps 3 and 4.
- If 10 seconds expire without any programming activity, or if the vehicle’s ig-
nition is turned “On”, the alarm will automatically exit Features Programming
Mode. The siren will conrm exit.
The alarm has 15 programmable features which allow it to be customized to
suite many individual needs. The following pages provide a brief explanation
for each feature, and notes its factory default setting.
• = Default Factory Setting
1. Auto-Rearm: ( •On = 1 siren chirp / Off = 2 chirps)
- Allows the Alarm to Rearm itself, if it is Disarmed.
2. Last Door Arming: (•On = 1 siren chirp / Off =2 chirps)
- Congures the alarm to automatically arm itself 30 seconds after the last
door is closed with the ignition “Off”.
3. Doors Lock w/ Last Door Arming: (•On = 1 siren chirp /Off = 2 chirps)
- Adds the automatic locking of the vehicle’s doors to the previous feature.
How to Program Features
Programmable Features

Page 11
4. Double Pulse Unlock: ( 2 pulses = 1 siren chirp / • 1 pulse = 2 chirps)
- Sets alarm to give 2 unlock pulses upon Disarm for cars that require it.
5. Immobilizer Mode: ( On = 1 siren chirp / •Off = 2 chirps)
- If this mode is programmed “On”, the starter interrupt will remain engaged
after the alarm is Disarmed, until the vehicle’s ignition is turned “On” and you
Press & Release the Valet button.
- Anti-Carjack: Upon disarming the “Immobilizer mode”, ignition activated
anti-carjacking will be automatically cancelled, (if programmed “On”).
- Remote Control Programming Mode: Immobilizer mode must be disarmed
before entering remote control programming mode.
6. Siren & Horn or Horn: ( •Siren & Horn = 1 siren chirp / Horn = 2 chirps)
- This feature congures the alarm’s Brown/Black Horn-Honk output wire.
This wire can be congured to honk the horn in addition to the Brown wire
operating the siren, or take over all of the Siren’s functions SO THAT NO
SIREN IS NECESSARY.
- If Siren & Horn are selected: The horn will honk in addition to siren sounding
only when the door, pin-switch, or ignition zones are violated. (The horn will not
honk if alarm is triggered by the sensor zone, or during conrmation “chirps”)
- If Only Horn is selected: The car horn will replace the siren and perform all
of its functions. NOTE: Brown Siren wire will still be fully active & operational.
7. Shock Sensor False-Alarm Bypass: (On = 1 siren chirp / •Off = 2 chirps)
- This feature will temporarily turn “Off” the shock sensor & pre-warn zone if:
a. The pre-warn is triggered 10 times while the alarm is Armed.
b. The instant trigger zone is triggered 5 times while the alarm is Armed.
- The by-passed zones will be reinstated the next time the alarm is Armed.
8. Dome-Light Delay Bypass: (On = 1 siren chirp / •Off = 2 chirps)
- This feature will turn “Off” the 3-chirp open zone warning when Arming the
alarm with the remote control. This is for use in vehicles that keep the dome-
light illuminated after the doors have been closed.
9. Ignition Activated Anti-Carjacking: (On = 1 siren chirp / •Off = 2 chirps)
- This feature turns the alarm’s Ignition Anti-Carjacking feature “On” or “Off”.
10. Remote & Door Activated Anti-Carjacking: (On = 1 chirp / •Off = 2
chirps) - This feature turns both the alarm’s Remote Control and
Open Door activated Anti-Carjacking features “On” or “Off”.

Page 12
11. Dome-Light or Window Roll-Up: (•Dome-Light = 1 siren chirp / Window
Roll-UP = 2 chirps)
- Congures the alarm’s “Black/White” wire to operate the:
a. Dome-Light: Supply a (-) output when the alarm is Disarmed to illuminate
the vehicle’s Dome-Light for 30 seconds through the use of a relay, or
b. Window Roll-Up or accessory: Supply a (-) output for 30 seconds when
the alarm is Armed to operate a Window Roll-Up module or other accessory.
12. 3rd Channel Output: (•Momentary = 1 siren chirp / Window Roll-UP
= 2 chirps)
- Congures the alarm’s “Pink” wire to operate an:
a. Accessory : Supply a (-) output as long as the “4th” button on the remote
control, is pressed & held while the vehicle’s ignition is “Off”, (max 30 seconds).
b. Window Roll-Up or accessory: Supply a (-) output for 30 seconds when
the alarm is Armed to operate a Window Roll-Up module or other accessory.
13. Ignition Door Lock/Unlock: (•On = 1 siren chirp / Off = 2 chirps)
- Congures the alarm to Lock the vehicle’s doors when the ignition is turned
“On” and Unlock the vehicle’s doors when the ignition is turned “Off”.
14. “RFID” Add-On to Anti-Hijacking: (On = 1 siren chirp / •Off = 2 chirps)
- Adds an “RFID” layer to both the Ignition & Open Door activated Anti-Hijacking
features. (Note: Special RFID remote control required)
JUMPER ON SIDE OF ALARM BRAIN:
LockPulseTime: ( • .80 seconds = Jumper “In” / 4 seconds = Jumper “Out”)
- Determines the length of the alarm’s door lock/unlock pulse output.
0.80
Sec
4.0
Sec

5 seconds
5 seconds
“RFID” ANTI-HIJACKING (Programmable Feature #14)
This feature requires the use of the #410-01 RFID Remote. (Sold separately)
1) To turn “On” the remote control’s RFID function:
Press & Hold the remote’s button for 5 seconds, the LED will ash to
conrm the RFID function is “On”
Note: If the RFID feature is “On”:
- Every time the remote’s button is pressed, the LED will “Flash”.
- Every 3 seconds, the remote will transmit a signal and the LED will ash.
- The remote has a built-in motion sensor. If this sensor detects no movement
for 2 minutes, the remote will enter a “sleep mode” to conserve battery life,
until the sensor detects movement again.
2) To turn “Off” the remote control’s RFID function:
Press & Hold the remote’s button for 5 seconds, the LED will light Solid
to conrm the RFID function is “Off”
Note: If the RFID feature is “Off”:
- Every time the remote’s button is pressed, the LED will light “Solid”.
- If the remote’s RFID feature is “Off”, it will be necessary to press the Valet
button to cancel the alarm’s Anti-Hijacking sequence.
Page 13

“RFID” Anti-Hijacking : (Programmable Feature #14)
For the RFID remote control to operate with the alarm, it is necessary to pro-
gram the remote to the alarm and turn “On” programmable feature #14.
If programmable feature #14 is “On”, the Anti-Hijacking operation will
commence every time:
1) The vehicle’s ignition is turned “On”
2) A vehicle door is opened while the ignition is “On”.
NOTES:
1) If programmable feature #14 is “On”, all Anti-Hijacking operations become
automatic as long as the remote control’s RFID feature is also turned “On”.
2) The user can always cancel the Anti-Hijack operation manually, by pressing
the Valet button anytime before full trigger.
3) Programmable feature #14 is completely independent of any other Anti-
Hijack feature.
4) If both programmable feature #14 and programmable feature #8 Ignition
Lock are “On”, the alarm will lock the doors only after it has received a signal
from the RFID remote control. If the user presses the Valet button to cancel
the Anti-Hijacking sequence, the alarm will NOT lock the doors with ignition.
IMPORTANT: For the RFID Anti-Hijacking feature to be effective, it is very
important that the user carry the RFID remote control on their person,
and that its not hanging on your key chain. This insures that if you are
forced out of the vehicle, the Anti-Hijacking sequence will begin as soon
as the alarm loses contact with your RFID remote.
IMMOBILIZER MODE: If the programmable Immobilizer mode feature is “On”,
pressing the Valet button to deactivate the immobilizer will also cancel the igni-
tion activated Anti-Hijack operation.
Page 14

“RFID” Anti-Hijacking Operation :
1) The RFID Anti-Hijacking process is activated every time the vehicle’s igni-
tion is turned “On”, or a vehicle door is opened while the ignition is “On”.
2) Upon activation, the alarm will begin to search for the RFID remote con-
trol’s signal for 3 minutes. (The Anti-Hijacking operation may be cancelled
manually by pressing the Valet button within the rst 59 seconds after activa-
tion).
NOTE: If the remote’s RFID feature is “Off”, the Anti-Hijacking operation can
only be cancelled by pressing the Valet button within the rst 59 seconds
after activation
4) If the alarm receives the remote’s RFID signal during the full 3 minute
search window, the alarm will exit the Anti-Hijacking mode and wait for the
next activation trigger to begin the process again. If During the 3 minutes, a
door is reopened, the 3 minute search is reset.
4) If during the 3 minute search, the alarm fails to receive the remote’s RFID
signal, the 3 minute search is reset.
5) If during the 3 minute search, the alarm fails to receive the remote’s RFID
signal 3 consecutive times, the alarm will begin the countdown towards
Anti-Hijack trigger. Pressing the Valet button any time before full trigger will
cancel the Anti-Hijack operation until the next time the ignition is turned “On”,
or a door is opened while the ignition is “On”.
6) If the remote’s built-in motion sensor does not detect any movement for 2
minutes it will enter a sleep mode. Before doing so, the remote will transmit
a sleep code to the alarm cancelling the Anti-Hijack operation until the next
time the ignition is turned “On”, or a door is opened while the ignition is “On”.
ORDER OF ANTI-CARJACKING SEQUENCE:
- For rst 20 seconds after the sequence has begun there are no signs.
- From 21-30 seconds, the LED will blink slowly.
- From 31-45 seconds, the LED will blink fast and the siren/horn will chirp
once every 2 seconds.
- From 46-60 seconds, the LED will blink fast and the siren/horn will chirp
once per second.
- If not cancelled yet, at 61 seconds the alarm will trigger.
- At 71 seconds, the “Starter Kill” output will engage
NOTE: Once the Anti-Carjack mode is triggered, the remote control will NOT
stop the operation, nor will the system reset automatically. Once it is triggered,
the Anti-Carjacking operation can only be deactivated by:
1) Turning the vehicle’s ignition “Off”.
2) Turning the vehicle’s ignition back “On”.
3) Within 5 seconds, Press & Release the Valet button.
Page 15

Page 16
Brown/Black : This wire can be congured (Programmable feature #6), to honk the
horn in addition to the Brown wire operating the siren, or take over
all of the Siren’s functions SO THAT NO SIREN IS NECESSARY Café/con lista Negra: Este cable se puede programar (función #6), a sonar el claxon en
conjunto al cable Café operar la Sirena, O TOMAR TODAS LAS
FUNCIONES DE LA SIRENA PARAQUE NO HAGA FALTA INSTALAR SIRENA.
Brown/Black - Café/Negro = (-Horn Output, Salida claxon -) Black/White - Negro/Blanco = (-Dome-Light , Salida luz de cabina-) Grey - Gris = (-Auxiliary output, Segundo canal auxiliar-) Pink - Rosado = (-3rd channel output, Tercer canal-) Orange - Naranja = (-Starter Kill, Corte -) Blue - Azul = (-Trigger Input, Disparo -) Violet - Violeta = (+Door Input, Puerta +) Green - Verde = (-Door Input, Puerta -) Yellow - Amarillo = (+Accessory, Ignición +) Brown - Café = (+Siren/Horn, +Sirena/Claxon) Red - Rojo = (+12 Volts, +12 Voltios) Black - Negro = (-Ground, -Tierra)
Combined:
LED Status Indicator
Valet/Override Button
NOTE: requires a 5/16” (8mm) hole to be drilled
Sensor
SS-2
Green - Verde = (-Lock, -Cierre) Red - Rojo = (+12 Volts) Blue - Azul = (- Unlock, - Apertura)
Pin-Switch (-)
Pin-Switch (-)
Pin-Switch (+)
Trunk
Release
Relay
Dome Light
(-) Auxil-
iary
Output
• Main Wire Harness (H-AL16A)
• Conector Central
White/Black - Blanco/Negro = (-Flashing Lights, -Luces) White - Blanco = (+Flashing Lights, +Luces)
OEM Factory
Relay Module
(150 Miliiamps Max)
”Negative” Circuit Parking Lights /
Circuito “Negativo” de Luces
Siren
Battery
15 Amp
+
Relay
Relay
Car Horn /
Claxon
“+12 VOLT” Circuit Parking Lights /
Circuito “(+) POSITIVO” de Luces
Door Lock/Unlock pulse lengths:
Jumper “ON” 0.80 Sec
Jumper “OFF” 4.0 Sec

Page 17
Negative Trigger System / Sistema Negativo:
Doorlock Switch
Ground
Vehicle’s Doorlock
Relay Control Unit
Lock
Unlock
Lock wire /
Cable de cierre
Unlock wire/ Cable de Apertura
+
Doorlock
Actuators
5 Wire Reversal (Rest at ground): Cambio de Polaridad:
Positive Trigger System / Sistema Positivo:
Doorlock Switch
(+) 12 Volts
Vehicle’s Doorlock
Relay Control Unit
Lock
Unlock
Lock wire /
Cable de cierre
Unlock wire/ Cable de Apertura
+
Doorlock
Actuators
(+)12 Volts
Unlock Unlock
Passenger
Doorlock Switch
Driver
Doorlock
Switch
- Lock wire “Switch” side.
-cable de Cierre, lado del switch
-Lock wire “Motor” side.
-cable de Cierre, lado Motor
Cut both Lock and
Unlock wires in car
- Unlock wire “Switch” side.
-cable de Apertura, lado del switch
Lock Lock
- Ground
- Unlock wire “Motor” side.
-cable de Apertura, lado Motor
Green
Blue
Fuse
30
87
87a
30
87
87a
Green
Blue
Lock Relay Unlock Relay
Fuse
30
87
87a
30
87
87a
Green
Blue
Lock Relay Unlock Relay
(+)12 Volts
Door Locking Systems / Sistemas De Cierre

Funcionamiento del Anti-Atraco Por Presencia:
1) El anti-atraco se activa cada vez que se enciende la ignición del auto, o
cuando se abre una puerta con la ignición del vehículo encendida.
2) Al activarse la secuencia del Anti-Atraco por Presencia, la alarma comien-
za a buscar la señal del control remoto por 3 minutos. (El usuario puede
presionar el botón “Valet” durante los primeros 59 de activación para cance-
lar el Anti-Atraco).
NOTA: Si la función Automatica de Presencia en el control remoto esta apa-
gada, es necessario presionar el botón “Valet” para cancelar la secuencia
del Anti-Atraco.
4) Si la alarma recibe la señal de Presencia del control remoto durante los 3
minutos, al n de los 3 minutos se cancela la secuencia del Anti-Atraco has-
ta la próxima vez que se enciende la ignición del auto, o se abre una puerta
con la ignición del vehículo encendida. Pero si se vuelve a abrir una puerta
durante este tiempo, los 3 minutos comienzan de Nuevo.
4) Si la alarma no recibe la señal del control remoto una vez, la alarma co-
mienza la busca del control por 3 minutos mas.
5) Si la alarma no recibe la señal de control remoto 3 veces consecutivas, la
alarma comienza la secuencia para el disparo del Anti-Atraco. Para evitar el
disparo, el usuario tendría que presionar el botón “Valet” antes del disparo.
6) Si el sensor de movimiento dentro del control remoto no detecta movi-
miento por 2 minutos, el control se duerme. Si esto pasa durante la secuen-
cia del Anti-Atraco, antes de “dormirse”, el control le manda una señal a la
alarma que cancela la secuencia del Anti-Atraco.
Secuencia del Anti-Atraco:
- Por los primeros 20 segundos no hay advertencias.
- Entre 21-30 segundos la luz LED hace intermitencias lentas.
- Entre 31-45 segundos la luz LED hace intermitencias rapadas y la sirena
emite un tono cada 2 segundos.
- Entre 46-60 segundos la luz LED hace intermitencias rapadas y la sirena
emite un tono cada 1 segundo.
- Si no se ha cancelado la secuencia, a los 61 segundos se dispara el Anti-
Atraco.
- A los 71 segundos, se active el “Corte”.
Para desactivar el Anti-Atraco después de que fue disparado:
a) Apaga la ignición del vehículo.
b) Enciende la ignición del vehículo.
c) Antes que pasen 5 segundos, presione el botón de “Valet”.
Pagina 15 E

Anti-Atraco Por Presencia: (Función Programable #14)
Para que este control remoto pueda funcionar con el sistema de Anti-Atraco
por Presencia, es necessario encender la función programable # 14 de la
alarma.
Con la función #14 encendida, el Anti-Atraco se activa cada vez que se:
1) Enciende la ignición del vehículo.
2) Cada vez que se abre una puerta con la ignición del auto encendida.
NOTAS:
1) Si la función #14 del Anti-Atraco Presencia esta encendida, todas las ope-
raciones del Anti-Atraco son automaticas, el usuario no tiene que hacer nada.
Pero, el botón de “Valet” siempre se puede presionar para cancelar la secuen-
cia del Anti-Atraco antes del disparo.
2) Esta función #14 de Anti-Atraco de Presencia es completamente indepen-
diente de las otras funciones de Anti-Atraco.
3) Si esta encendida la función de Anti-Atraco por presencia #14 y la función
programmable de Cierre de seguros con Ignición, la alarma cierra los seguros
después que recibe la señal de presencia del control remoto. Si el usuario
presiona el botón “Valet” para cancelar la secuencia del Anti-Atraco,. La alar-
ma no cierra los seguros.
IMPORTANTE: SI LA FUNCION DE PRESENCIA ESTA ENCENDIDA, ES
MUY IMPORTANTE QUE EL USUARIO MANTENGA EL CONTROL REMO-
TO CON SU PERSONA, Y NO CON LAS LLAVES DEL AUTO. DE ESTA
MANERA SI EL USUARIO ES SACADO EL AUTO, EL ANTI-ATRACO
COMIENZA CUANDO EL AUTO PIERDE CONTACTO CON EL CONTROL
REMOTO.
MODO DE INMOVILIZADOR: Si la función programable esta encendida, al
desactivar el modo de inmovilizador, presionando el botón Valet con la igni-
ción encendida, también se desactiva el Anti-Atraco por Presencia.
Pagina 14 E