Exclusive Heritage BV-10060D-WMWH User manual

59.3”
57.87”
33.86”
31.5”
INSTALLATION MANUAL
PACKING LIST
RECOMMENDED TOOLS
Main Cabinet
Pen & Ruler Caulk & Caulk Gun Power Drill Phillips Screwdriver Adjustable Wrench Goggles, Gloves & Ear Plugs
Countertop Mirror Mirror Installation Screws
Sink Mounting Kit Square Sink 4 Leg Stems
ENOCILIS
MODEL: BV-10060D-WMWH
1. Exclusive Heritage
recommends you to review
the Installation Manual
before starting the vanity
installation.
2. Please handle heavy objects
with care and support to
avoid mishaps damages or
injuries.
3. After completing the
installation, please wait up
to 24-hours before using the
vanity.
4. When cleaning the top or
cabinet use mild strength
for scrubbing to avoid
scratching the surface.
5. Professional installation
recommended.
Width: 59.3”
Depth: 21.65”
Height: 33.86”
SAFETY & PRECAUTIONS
OVERALL DIMENSIONS

1
3
2
HINGES INSTALL & ADJUSTMENT HOW TO CARRY THE TOP
SINK INSTALLATION
TOP & BACKSPLASH INSTALLATION
1. Attach hinge (A) to door with screws (B). 2. Attach mounting plate (A) to cabinet with screw (B).
12
34
1 2 3
Fig. A
CAUTION
Whether you are picking up a small or
large marble countertop, always have
extra support handling the heavy object.
We recommend two adults lifting and
manuevering the countertop around.
1.Apply a continuous stream of silicone glue around the
top of the cabinet.
2.Carry the countertop and gently place it onto the
cabinet.
3.Install the backsplash by applying silicone glue near
the edge of the countertop. Then place the backsplash
onto the silicone area. Add additional silicone onto the
edges for sealant if necessary.
Note: Allow up to 24-hours for the silicone glue to dry
before using the vanity.
3. Attach hinge (A) to mounting plate (B)
and snap into position.
4. Align door to cabinet. Use screw (A) to adjust
door depth, screw (B) to adjust vertically and screw
(C) to adjust horizontally.
• Apply a continuous stream of silicone glue around the
sink top rim. Flip the countertop upside down.
• Carefully align the sink onto countertop back, fasten the
sink rim with the sink mounting screws.
• Apply a continuous silicone glue along the sink edges to
seal any gaps.
1. Measure the screw holes from the backside of mirror (Fig. A) distance.
Then drill the holes into the wall.
2. Insert the anchor screws into the holes and drill the screws into them.
3. Hang up the mirror into position and it’s done.
MIRROR INSTALLATION