Furniture of America Tychus CM7559Q User manual

Rev: 18-05-04
For more information contact our team: [email protected]

Prepare 6 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A).
Align legs (#2R/L) to the holes of the headboard panel (#1). Secure with bolts (#A).
Prepare 6 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A).
Align leg support (#3) to the holes of the headboard legs. Secure with bolts (#A).

Hook the side rails (#6) onto the latch of the headboard (#1) and footboard (#4).
Make sure the side rails (#6) are firmly attached.
Attach 4 support legs (#8) onto center support (#5). Adjust
the floor protector according to the ground level.

Align slats (#7) to the side rails (#6),
then secure with screws (#E).

Rev: 18-05-04
For more information contact our team: [email protected]

Prepare 6 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A).
Align legs (#2R/L) to the holes of the headboard panel (#1). Secure with bolts (#A).
Prepare 6 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A).
Align leg support (#3) to the holes of the headboard legs. Secure with bolts (#A).

Hook the side rails (#6) onto the latch of the headboard (#1) and footboard (#4).
Make sure the side rails (#6) are firmly attached.
Attach 4 support legs (#8) onto center support (#5). Adjust
the floor protector according to the ground level.

Align slats (#7) to the side rails (#6),
then secure with screws (#E).
Prepare 10 bolts assembly by
inserting lock washer (#G), then
flat washer (#H) onto bolts (#F).
Align side rail top panel (#9) to
the holes of the side rails (#6).
Secure with bolts (#F).

Rev: 18-05-04
For more information contact our team: [email protected]

Prepare 6 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A).
Align legs (#2R/L) to the holes of the headboard panel (#1). Secure with bolts (#A).
Prepare 6 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A).
Align leg support (#3) to the holes of the headboard legs. Secure with bolts (#A).

Hook the side rails (#6) onto the latch of the headboard (#1) and footboard (#4).
Make sure the side rails (#6) are firmly attached.
Attach 4 support legs (#8) onto center support (#5). Adjust
the floor protector according to the ground level.

Align slats (#7) to the side rails (#6),
then secure with screws (#E).