EXO2 HeatBand User manual

The Heat Inside®
www.exo2.co.uk
TROUBLESHOOTING
What happens if my HeatBand doesn’t get warm?
Firstly, check that you have the HeatBand connected to the
power pack supplied and that the LED shows red when switched
on, indicating power is available.
Should you have any questions about your heated products,
please contact:
Customer Services Dept
EXO2
Caledonian House
Phoenix Crescent
Strathclyde Business Park
Bellshill ML4 3NJ
Tel: [phone]
Email: [email protected]
HEATBAND
The Heat Inside®
The Heat Inside®

Your high performance HeatBand heated neck warmer
has been designed to provide warmth and comfort
to enhance the safety and enjoyment of your outdoor
experience or to improve blood circulation.
Our unique FabRoc® polymer heating technology
provides the world’s first self-regulating heating system.
No external controller is required as the material will
heat to the pre-set temperature of 460C. Continuous use
of 3-5 hours is available on a single charge of your EXO2
power pack.
SETTING UP AND USING YOUR HEATBAND
Your HeatBand heated neck warmer is simple to operate and
set-up. Every system comes supplied with a 3.7v lightweight
miniature power pack. Moving the switch vertically will light the
LED red, which indicates that power is available and the unit is
now on.
To operate your HeatBand, simply insert the neck
warmer plug into the miniature power pack
(charged) and then slip it into the pocket provided.
To charge your HeatBand power pack, connect it to the charger
unit supplied. Please ensure that the power pack is switched
on when being charged; the charger unit LED will light red until
charging is complete, at which time the charger LED will change
to green and the unit can be unplugged and used normally.
It will take several hours to charge these power packs fully,
however a fast charge offering 1.5 to 2 hours of heat can be
achieved after one hour of charging.
HEATBAND SPECIFICATION
• Quality fleece lined inner.
• Lycra shell.
• FabRoc® panel at rear section (self-regulating at 460C)
to relax tensed muscles and increase blood flow.
• Neoprene exterior.
• Velcro fastener.
SAFETY FEATURES
The FabRoc® heating system has been designed for safe and
reliable use. It has been tested to comply with European safety
regulations and the power system has been CE marked. Safety
devices are included to ensure the unit is rendered safe, even
under fault conditions.
DO NOT replace or interfere with the electrical components in
your band or the power pack and charger unit.
WARRANTY
Every EXO2 product is supplied with a one-year warranty
covering all electronic and mechanical failures. In the unlikely
event that any part should fail within the first year, return it to
us and we will repair or replace it free of charge.
Note: The warranty does not cover intentional alterations,
accidental damage or improper cleaning.