Exoton EX-12A BARON Series User manual
EX-12A/EX-15A BARON SERIES
12/15 INCH PROFESSIONAL COMBO SPEAKER
(ACTIVE & PASSTIVE)
EX-12A/EX-15A BARON SERIES
User’s Manual
EXOTON preserves the right to improve or alter any information within this document without prior notice
CONTENTS
EX-12A/EX-15A BARON SERIES
600W/800W ACTIVE SPEAKER
600W/800W PASSTIVE SPEAKER
1.0 IMPORTANT SAFETY INSTRUCTIONS
2.0 INTRODUCTION
2.1 ACTIVE & PASSTIVE SPEAKER
2.2 FEATURES
3.1 REAR PANEL(1)
3.2 REAR PANEL (2)
4.1 REAR PANEL DESCRIPTION
5.1 DESCRIPTION OF WIRED MICROPHONE
5.2 INSTRUCTION FOR SPEAKER TRIPOD
6.1 REMOTE CONTROL DESCRIPTION
6.2 TIPS ON USING THE REMOTE CONTROL
7.1 BLUETOOTH CONNECTION
7.2 ACTIVE SPEAKER CONNECTS TO PASSIVE SPEAKER
8.1 EX-12A PRODUCT SIZE
8.2 EX-15A PRODUCT SIZE
9.1 PACKAGE CONTECTS
9.2 TROUBLE SHOOTIN
10.1 SERVICE AND REPAIR
10.2 WARRANTY INFORMATION
10.3 CUSTOMER SERVICE AND TECHNICAL SUPPORT
01
02
02
02
03
03
04
05
05
06
06
07
07
08
08
09
09
10
10
10
………………………………………………………
…………………………………………………………………
………………………………………………………………………………………………
…………………………………………………………………………………………
………………………………………………………………………………………
………………………………………………………………………………………
……………………………………………………………………
…………………………………………
…………………………………………………
……………………………………………………………
……………………………………………………
………………………………………………………………………
………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
…………………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………
…………………………………
02 EX-12A/EX-15A BARON SERIES
1. Read these instructions before operating this
apparatus.
2. Keep these instructions for future reference.
3. Heed all warnings to ensure safe operation.
4. Follow all instructions provided in this document.
5. Do not use this apparatus near water or in locations
where condensation may occur.
6. Clean only with dry cloth. Do not use aerosol or liquid
cleaners. Unplug this apparatus before cleaning.
7. Do not block any of the ventilation openings. Install
in accordance with the manufacturer
’
s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If
the provided plug does not into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plug, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket, or
table by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from tip-
over.
13. Unplug this apparatus during lighting
storms or when unused for long
periods of time.
14. Refer all servicing to service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
1.0 IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED PERSONNEL
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated
“
dangerous voltage
”
within the
product
’
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is in-
tended to alert the user to the presence of important operat-
ing and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: To reduce the risk of or electric shock, do
not expose this apparatus to rain or moisture.
CAUTION: Use of controls or adjustments or performance
of procedures other than those may result in
hazardous radiation exposure.
The apparatus shall not be exposed to dripping or splashing and that no objects with liquids, such as vases,
shall be placed on the apparatus. The MAINS plug is used as the disconnect device, the disconnect device shall
remain readily operable.
Warning: the user shall not place this apparatus in the area during the operation so that the mains switch
can be easily accessible.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
2.1 ACTIVE & PASSTIVE SPEAKER
The EX-12A/EX-15A Baron Series speaker is a complete package 2×12〞/2×15〞PA system. Everything you need
in a pro PA system setup is included: You get two 12"/15" pro audio speakers with 1200/1600 watts of total power.
The system includes a master active speaker that features the built in amplifier and a slave passive 12"/ 15"
speaker that is powered from the master speaker/amp. Rounding off this system are speaker stands so
you can mount the speakers, a microphone and all connection cables necessary, so that you can get your
party started right out of the box. The EX-12A/EX-15A is perfect for DJ applications, karaoke, and parties
or for live music gigs.
The EX-12A/EX-15A has a great Bluetooth integration, USB input, SD card input, and preset digital graphic equalizer
effects.
a massive amount of bass,
distort so you can keep control on the music. Separate Bass and Treble controls are also
you can custom tailor your sound stage. There is also a built in equalizer allowing you to
the style of music you are listening too.
The ABS plastic polymer cabinet is time aligned with the drivers so the system is optimized to deliver
clean mids, and clear highs. The main active unit features are beginning to
included so that
adjust the sound to
The built in USB input and SD input are great options for playing back any of your stored music on USB or
SD cards. The Bluetooth integration features the latest in BT protocol from the world leader in Bluetooth
technology; CSR. Bluetooth is a great feature for powered pro audio speakers because it allows you to
easily and wireless stream your music from any Bluetooth enabled MP3 player or phone. Also included in
the MP3 section of the unit is a built-in FM radio.
2.0 INTRODUCTION
Congratulations on your purchase of the EX-12A/EX-15A Baron Series professional combo speaker.Baron Series
speakers have an attractive yet impact-resistant design. The angled molded enclosure is made of highly
durable polypropylene and is designed for use as a stage monitor, standmounted speaker or for permanent
installation.
600/800 Watts RMS
12" Woofer
Mic / Line Balanced Preamp
Switching Power Supply (115-230V, 50-60 Hz)
Balanced XLR-type inputs with switched Mic/Line sensitivity and XLR-type LINK OUT
35mm socket on bottom for pole / stand mounting
7 color light
2.2 FEATURES
01
EXOTON
03 04
EX-12A/EX-15A BARON SERIES EX-12A/EX-15A BARON SERIES
4.1 REAR PANEL DESCRIPTION3.1 REAR PANEL (1)
3.2 REAR PANEL (2)
1
234567
8
9
1、SD SLOT：Insert an SD card to read data from it
2、MODE BUTTON：Press to change modes between playing FM,USB, MP3 and Bluetooth
3、PLAY/PAUSE BUTTON：Press this button to start or pause play
4、RECYCLE BUTTON:Single song recycle/all songs recycle
5、FOLDER FUNCTION:Press this button to enter FOLDER selection
6、PREVIOUS BUTTON：Press this button to go to the previous track. Press and hold to scan backwards
within tracks
7、NEXT BUTTON：Press this button to go to the next track. Press and hold to scan forwards within tracks
8、USB SLOT：You can play media files from a USB device by connecting the device to this slot
9、IR:Remote control receiver
1.VOLTAGE SELECTOR
This switch allows you to select the AC electric current in use in your region. It is very important that you
select the correct MAINS POWER voltage before plugging in the power cord. For 220-240 volts 50 Hz, push
the switch up. For 110-120 volts60 Hz, push the switch down. Voltage levels vary from country to country,
(even from city to city in certain countries). For example，North America uses a 110-120 volt,60HZ system,
while the European standard is 220-240 volt,50HZ
2.IEC SOCKET
Connect the supplied AC power cord here. Since Baron active speakers have built-in power amplifiers, you
must connect them to an AC power supply or you won't get any sound.
Note: lf you happen to leave the power cord behind at agig, don't worry.The 3-pin plug with ground pin is
readily available at most office and computer supply stores.
3. POWER SWITCH
To turn on the Baron active speaker set the power switch to the on (l) position. To turn the Performer off, set
4. SPEAKON JACK
Use a cable to plug into this jack to connect active and passive speakers.
5. LIGHT SWITCH
Press to turn on or off the seven-color light.
the switch to the off position (o). Make sure the volume control is turned down all the way before you turn the
power on or off.
8、INSTRUMENT JACK:Two 1/4inch jack inputs for connecting musical Instruments
9、AUX IN::Auxiliary TRS input connector
10、MIC IN:This connector can either take a 1/4inch Jack balanced or an XLR balanced cabled microphone
11:MIC IN:This connector can either take a 1/4inch Jack balanced or an XLR balanced cabled microphone
12、RCA LINE IN:RCA connectors for line signal input
13、5 BAND EQ CONTROL:Adjust the amount of each frequency component in the sound signal to obtain
the desired emphasis effect
14、EFF LEVEL:Control total reverb
15、MASTER VOLUME CONTROL:Adjust the total volume
16、XLR LINE OUT:RCA connectors for line signal output
1、VOLUME LEVEL 1：Control the volume of line
2、VOLUME LEVEL 2：Control the volume of line
3、VOLUME LEVEL 3 ：Control the volume of line
4、REVERB KONB :Control the reverberation of line
5、REVERB KONB :Control the reverberation of line
6、MP3 KONB :Controls the MP3 input volume
7、INSTRUMENT JACK:Two 1/4inch jack inputs for connecting
musical Instruments
1 2 3
4 5 6
7 8 9
10 11 12
13
14 15
16
1 23
4
5
EXOTON EXOTON
05 06
EX-12A/EX-15A BARON SERIES EX-12A/EX-15A BARON SERIES
5.1 DESCRIPTION OF WIRED MICROPHONE
1. Installation and disassembly of connecting cables
(1) Installation of connecting line:
Counterclockwise rotation ①to open the Cannon plug;
Press the button ②to push the XLR plug into the microphone;
Release the button ②and rotate it clockwise ①to lock it;
(2) Disassembly of the connecting line
Counterclockwise rotation ①to open the Cannon plug;
Press the button ②to pull the XLR plug out of the microphone;
2. Connect the microphone to the speaker
Plug the other end of the microphone into the back jack of the speaker
5/8/9. This microphone and jack 8/9 connection of sound performance
will be more perfect.
3. Instructions for using the microphone
(1) Yelling may occur when covering the microphone head with your hand or holding the microphone close to the speaker.
In this case, the first step is to reduce the volume. Then open the distance with a megaphone. Finally try to position the
microphone against the speaker.
(2) When the microphone sensitivity is high, care must be taken not to fall from the height, impact or give a strong impact.
(3)When not in use, the microphone should be stored in a dry, clean place. Avoid storage or use in high temperature and
humidity, so as not to affect sensitivity and timbre.
5.2 INSTRUCTION FOR SPEAKER TRIPOD
1.Steps for installing sound box support
(1) Turn the knob on the bracket 2/3 counterclockwise, and
then adjust the bracket to a suitable height and tighten the lock
clockwise.
(2) Insert 4 into the bracket jack to fix.
(3) Turn the knob 6 at the bottom of the speaker
counterclockwise.
(4) Align jack 5 at the bottom of the speaker with jack 1 of the
support. After the installation is stable, lock the thick button 6
clockwise.
1
2
1
2
3
4
EXOTON EXOTON
5
6
6.0 REMOTE CONTROL DESCRIPTION
1.STANDBY ON
Start the EX-12A/EX-15A system or switch it to standby mode.
2.MODE
Press to change modes between playing FM, USB, MP3 or Bluetooth.
3.MUTE
Pause/resume sound playback
4.EQ
Adjust the amount of each frequency component in the sound signal to
obtain the desired emphasis effect.
Note: This button only works with speakers with EQ functionality. This
speaker does not have the EQ function.
5/6.VOL +/-
Adjust the volume
7.Previous track
8.Next track
9.Music play/pause
10.SCN
FM Search channel
11.RPT
Single track loop mode
12.Number keys
The remote control has 10 keys ranging from 0 to 9. In the music playing
state, press the number key to enter the music it represents. For example,
if the number "8" in your playlist is "8", pressing the "8" key will play the
music represented by the number "8".
6.1 TIPS ON USING THE REMOTE CONTROL
Certain conditions (such as indoor lighting, furniture that interferes with the signal path, or direct sunlight) can
interfere with how the remote works.
If the remote doesn't work:
. Point the remote control directly at the right speaker receiving the signal from the remote control.
. The battery is not installed or properly installed.
. Dim lights or move speakers in the room to avoid direct sunlight.
. When you use the remote control, stay close to the system.
. If the problem persists, replace the battery on the remote control.
Note:
The included remote control has no battery. To ensure that the
battery is not dangerous due to leakage, there will be no batteries in the
remote control. Before using the remote control, you need to purchase
the matching 7 battery. You can buy it easily at a nearby convenience
store or store. The remote won't work unless you have the battery
installed correctly in positive and negative directions!
Please buy batteries and install them！
-
-
+
+
07 08
7.1 BLUETOOTH CONNECTION 8.1 EX-12A PRODUCT SIZE
7.2 ACTIVE SPEAKER CONNECTS TO PASSIVE SPEAKER
EX-12A/EX-15A BARON SERIES EX-12A/EX-15A BARON SERIES
1. Activate the BT-function on your device (Mobile phone, tablet etc.) from which you want to play the music. See
the operating instructions for that device.
2. Press the ""MODE"" button and activate BT-function.
3. Select the Bluetooth name ""EXOTON"" on your device to connect.
Attention: The BT distance is approx. 10 meter without any barrier.
Plug the cable into the SPEAKER jack of the active and passive speaker to connect
EXOTON EXOTON
27in
17in 15in
23in
15in 13in
8.2 EX-15A PRODUCT SIZE
09 10
EX-12A/EX-15A BARON SERIES EX-12A/EX-15A BARON SERIES
EXOTON
You can also contact us directly through Amazon and we will help you find the item you want.
10.1 SERVICE AND REPAIR
related matters. The company does not issue service manuals to users, and users are
advised not to attempt any self-maintenance. Because doing so would void all warranties. If
you have any question, also can visit our website to find the answers:
https://hyanka.myshopify.com.
10.2 WARRANTY INFORMATION
EXOTON is committed to providing the best warranty service for each product. From the date
of original purchase, EXOTON provides a warranty of three months for any material or
workmanship problems arising out of strict compliance with the instructions. EXOTON may
repair the product within this warranty period. Please be sure to properly keep the "proof" of
purchase products, so as to obtain warranty service. Products without purchase certificate will
not be accepted for return, and warranty service. The warranty service is limited to problems
arising from normal use. Users should strictly follow the instructions for correct use. Any
wanton damage or unauthorized maintenance of the machine, accident, wrong use, human
negligence, etc., will not be accepted by the warranty scope. In addition, the guaranteed repair
is only valid for purchase in the Brand's Amazon store or brand website store. If you have
other questions, please visit: https://hyanka.myshopify.com.
10.3 CUSTOMER SERVICE AND TECHNICAL SUPPORT
You are welcome to visit our website at https://hyanka.myshopify.com. From this website, you
can get answers to frequently asked questions, technical guidance, return instructions and
other helpful information. We do our best to respond to your inquiry within one business day.
EXOTON
https://hyanka.myshopify.com
9.1 PACKAGE CONTECTS
9.2 TROUBLE SHOOTIN
Refer to the chart below if the speaker does not function properly. If the problem you are experiencing is not
listed, or if the instructions fail to help you resolve the problem, disconnect the power cord and contact us
immediately.
P
roblem Cause
N
o power supply is provided even if
t
he power plug is in the open
p
osition.
The power plug is not securely connected or there
is no safety connection. Attach the power plug firmly or reattach it securely.
The connected socket is not energized. Replace energized sockets.
N
o sound.
The audio signal has not been connected to the
a
udio source input interface behind the speaker.
Connect the audio signal correctly to the audio input
interface behind the speaker.
The audio source device is not enabled. Ensure that all audio source devices are powered on
and functioning properly.
The VOLUME control is set to 0.
Turn the VOLUME control on clockwise.
S
ound quality deteriorates.
Connection error.
1. Check whether the audio signal cable is correctly
connected to the output port of the audio source
device.
Loudspeaker failure.
2. Check whether all the speakers on the speaker box
are making sound. If there is no sound, contact us
immediately.
Poor contact.
3. Check whether the connector of the speaker is
oxidized and whether the terminal of the speaker is
loose.
S
ound level is too low.
You are playing an underbass source.
Change the correct audio source.
The volume control is set too low.
Turn the volume control clockwise to a suitable level.
T
he remote control does not control
t
he hoist.
The battery is not installed correctly.
Install the battery correctly.
The remote control is too far from the speaker. Shorten the distance between remote control and
speaker
Battery failure caused by long service time.
Replace a new battery.
Ensure that all audio source devices are powered on and
functioning properly
Remote Control
Wire Microphones
Speaker Cable
User Manual
Active Speaker
Passive Speaker
Cabinet Stands
Power Cable
X1
X1
X2
X1
X1
X1
X1
X1
This manual suits for next models
1
Table of contents
