Extreme Tools EX4106TCS User manual

Extreme Tools, Inc.
740 Frontenac Road
Naperville, Illinois 60563
630.369.9303
www.ExtremeTools.net
41 inch Powder Coated Steel
Tool Carts
© 2021
Model: EX4106TCS
41” 6 Drawer Sliding Top Tool
Cart with Bumpers
Model: EX4106TC
41” 6 Drawer Flip Top Tool
Cart with Bumpers

Tool Cart with Flip Top Parts List
EX4106TC
7
8
14
12
10
11
9
3
2
16
6
4
15
18

Tool Cart with Flip Top Parts List
EX4106TC
Item Part Number Descrip�on Qty
2 SW-100LB-3045B (OL) Outer Slide - 100lbs, 21.2" 9
3 Z-DL4125TC Drawer Liner 6
4 Z-CA6SB(CRS) 6X2 Chrome Mag wheel swivel w brake, NO LOGO 2
17 Z-CA6R(CR) 6X2 Chrome Mag Caster (Rigid) 2
5 Z-PR.188 3/16" SS Pop Rivet - Hinge Used 8
6 Z-SCM6-12MM M6-1.0x12 Socket Head Screw & Washer 4
7 EX4125TC-40R Lid Assy - TC 1
8 Gas Strut (350m-13.78) Gas Strut, 350L-110-350N 2
9 DR3-4125TC Drawer Assy 3 1
10 DR1-4125TC Drawer Assy 1 3
11 DR2-4125TC Drawer Assy 2 2
12 Z-TCBMPR-SC Tool Cart Corner Bumpers 4
13 Z-LK + code Lock & Key - see Lock Face or Key for Code 1 set
14 EX4125TC-27 Parts Tray Divider 8
15 Z-BTM10-25MM M10x25mm Hex Bolt 16
16 Z-HNDL4106RC Side Handle - 4106TC 1
not
shown
Z-LGS Extreme Tools® name plate 1
18 ACPTR Adjustable Power Tool Rack Accessory 1
Replacement keys may be ordered using the code that appears
on the face of the lock.
To order replacement parts, have the part number, tool box
color and quantity ready. If under warranty, the serial number is
REQUIRED to get replacement parts.
Not all parts are available under warranty and may be
purchased separately.

Tool Cart with Sliding Top Parts List
EX4106TCS
44
18
20
3
11
5
17
10
9
10
8
16
19
12
20
5
17
6
21

Tool Cart with Sliding Top Parts List
EX4106TCS
Item Part Number Descrip�on
Qty
3 SW-100LB-3045B Set (OL) 100 lbs., 21.2" BB Slide (Set)
9
4 EX4125TC-38STA Sliding Lid-Tray Assembly-RH
2
5 Z-HNDL4125TC SS Tubular Side Handle - 4106TC
1
8 Z-LK + code Lock & Key - see Lock Face or Key for Code
1 set
9 DR1-4125TC Drawer Assy 1
3
10 DR2-4125TC Drawer Assy 2
2
11 DR3-4125TC Drawer Assy 3
1
12 Z-CA6SB(CRS) 6X2 Chrome Mag wheel swivel w brake 2
16 EX4125TC-27 Parts Tray Divider 8
17 Z-SCM6-12MM M6-1.0x12 Socket Head Screw & Washer 4
18 Z-TCBMPR-SC Tool Cart Corner Bumpers 4
19 Z-DL4125TC PVC Drawer Liner 6
20 Z-BTM10-25MM M10x25mm Hex Bolt 16
not shown
Z-CA6R(CR) 6X2 Chrome Mag Caster (Rigid) 2
not shown
Z-LGS Extreme Tools® name plate 1
21 ACPTR Adjustable Power Tool Rack Accessory 1
Replacement keys may be ordered using the code that appears
on the face of the lock.
To order replacement parts, have the part number, tool box
color and quantity ready. If under warranty, the serial number is
REQUIRED to get replacement parts.
Not all parts are available under warranty and may be
purchased separately.

Handle Installation
NOTE: Install the handle rst to make it easier to move the tool cabinet.
Position the handle over the holes in the cabinet and attach with the provided
(4) M6 Socket Head Screws. Tighten securely.
ASSEMBLY
Caster Installation
NOTE: Lock the lid / sliding top and
drawers BEFORE proceeding!
Tool Cart is heavy. Installation requires
assistance of another adult to complete
this step.
With assistance, carefully lay the cabinet
on its back onto a soft surface such as a
mat to protect the cabinet nish.
Position each swivel casters on the bottom
of the cabinet on the same side as the side
handle.
Use (4) M10 hex bolts to install each
caster. (Please note: M10 hex bolts have
built-in washers and do not require an
additional washers.) Insert M10 Hex Bolts
through the bottom of the caster and then
insert the end of the bolts into the holes
in the bottom of the Cabinet. Tighten all 4
bolts securely. LOCK CASTER!
Repeat instructions above for installing all
casters. LOCK ALL CASTERS BEFORE
lifting cart to upright postion!

Drawer Removal
Pull drawer out so that it is almost
fully extended.
Push up on the black lever on one
drawer slide and at the same time
push down on the lever on the
other side.
With the levers in these positions,
pull the drawer out until it releases
from the drawer slides.
Drawer Replacement
Extend the drawer slides.
Careful align the brackets on
the sides of the drawers with the
slots of the cabinet slides. Insert
the brackets on the side of each
drawer into the slots of the cabinet
slides.
Once properly inserted,
completely close the drawer to
set the slides into their properly
functioning positions.
MAINTENANCE
Lubricate the casters once a year with high quality ball bearing grease.
Lubricate the slides twice a year with high quality, petroleum-based
lubricant. This may be required more often If operating the tool box in colder
climates.
Use mild detergent and water to clean drawer fronts, drawer trim and other
surfaces.
Grease and oil can be removed with standard, non-abrasive, non-
ammable cleaning products.
Auto wax will help preserve the unit’s high gloss nish. Follow directions as
provided.
OPERATING PROCEDURE

SAFETY
Do not attempt to lift the cabinet by its side handle using chains, ropes or lifting device.
Side handle may fail resulting in personal injury or damage to the product!
Use a forklift or similar lifting device with forks placed under the bottom of the tool box to
move if tool box cannot be moved by two people.
CLOSE THE DRAWERS AND LOCK THE TOOL BOX BEFORE MOVING THIS
PRODUCT!
If drawers are not locked they could open and make the product unstable and tip which
may cause personal injury or damage to the product.
Do NOT stand on this product or lean on the drawer or work top.
Wear safety glasses when removing or repositioning the slides. The tool box could slip
resulting in personal injury.
Do NOT mount this product on a truck bed or other moving object. This may cause
personal injury or product damage. Mounting this product on any surface will void the
warranty.
Do NOT tow with power equipment. The product could tip which may cause personal
injury or product damage.
Do NOT alter this product in any manner or attach electrical equipment. This may cause
personal injury or product damage and will void the warranty.
DRAWERS MUST BE CLOSED AND TOOL BOX LOCKED USING KEYS
BEFORE MOVING!
The maximum weight for each drawer should not exceed 100 lbs. (45 kg) for single slides
and 200 lbs. (90 kg) for drawers with double slides.
Maximum overall weight should not exceed 1.500 lbs. (680 kg.)
Use caution when closing the chest lid/sliding top. Remove hands from the area before
closing to prevent personal injury.
Do NOT pull this product. Push the product to prevent personal injury.
ENGAGE THE BRAKES when not moving this product. Locked casters prevent the
product from rolling which may result in personal injury or damage to the product.
This product may become unstable and tip if more than one drawer is open at a time. To
prevent personal injury or damage to product, OPEN ONLY ONE DRAWER AT A TIME.
Lock product and properly secure before moving with a forklift or other device.
Keep the product on a level surface. The product could become unstable and tip if stored
or moved on an uneven surface which may result in personal injury or product damage.
WARNING
CAUTION - IMPORTANT PRODUCT INFORMATION