ExtremeSwitching ISW Series User manual

ISW Series Managed Industrial Ethernet
Switch Hardware Installation & User Guide
ISW 4-10/100P, 2-10/100T, 2-SFPISW 4GbP, 2GbT, 2-
SFPISW 8-10/100P, 4-SFPISW 8GbP, 4-SFP
9034965-02 Rev AA
November 2020

Copyright © 2020 Extreme Networks, Inc. All rights reserved.
Legal Notice
Extreme Networks, Inc. reserves the right to make changes in specifications and other information
contained in this document and its website without prior notice. The reader should in all cases
consult representatives of Extreme Networks to determine whether any such changes have been
made.
The hardware, firmware, software or any specifications described or referred to in this document
are subject to change without notice.
Trademarks
Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of
Extreme Networks, Inc. in the United States and/or other countries.
All other names (including any product names) mentioned in this document are the property of
their respective owners and may be trademarks or registered trademarks of their respective
companies/owners.
For additional information on Extreme Networks trademarks, see: www.extremenetworks.com/
company/legal/trademarks
Open Source Declarations
Some software files have been licensed under certain open source or third-party licenses. End-
user license agreements and open source declarations can be found at: https://
www.extremenetworks.com/support/policies/open-source-declaration/

Table of Contents
Preface...................................................................................................................................5
Text Conventions.......................................................................................................................................................... 5
Documentation and Training.................................................................................................................................. 6
Getting Help....................................................................................................................................................................7
Subscribe to Service Notifications.............................................................................................................. 7
Providing Feedback.....................................................................................................................................................7
Industrial Series Switch Overview.....................................................................................9
Safety Instructions.......................................................................................................................................................9
Faceplate and Panels................................................................................................................................................10
LED Status Indicators............................................................................................................................................... 12
Technical Specifications...........................................................................................................................................14
System Statistics.................................................................................................................................................17
Installing Industrial Switches............................................................................................18
Mounting the ISW (DIN-Rail)................................................................................................................................ 18
Mounting the ISW (Wall).........................................................................................................................................19
Connecting the Ethernet Interface (RJ45 Ethernet)............................................................................... 20
Connecting the Ethernet Interface (Fiber).....................................................................................................21
Connecting the Power Terminal Block............................................................................................................ 23
Alarm Relay and Ground Connection..............................................................................................................23
Console Connection................................................................................................................................................. 24
System Reset............................................................................................................................................................... 25
Connecting & Logging in to the Switch..........................................................................................................26
Web Browser Support....................................................................................................................................26
Monitoring the Ethernet Interface..................................................................................................................... 27
Upgrading and Downgrading Software..........................................................................................................27
Resetting Configuration Defaults via CLI Command............................................................................... 27
Resetting Configuration Defaults via Web UI.............................................................................................. 28
ISW Application Guides....................................................................................................29
VLAN Application Guide........................................................................................................................................29
Example 1: Default VLAN Settings............................................................................................................29
Example 2: Port-based VLANs.................................................................................................................. 30
Example 3: IEEE 802.1Q Tagging...............................................................................................................32
Security Application Guide...................................................................................................................................34
Case 1: ACL for MAC Address..................................................................................................................... 35
Case 2: ACL for IP address...........................................................................................................................48
Case 3: ACL for L4 Port.................................................................................................................................48
Case 4: ACL for ToS.........................................................................................................................................48
Ring Version 2 Application Guide..................................................................................................................... 49
Ring Version 2 Features.................................................................................................................................49
Configuring Ringv2 (Console)....................................................................................................................50
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide iii

Configuring Ringv2 (Web UI).......................................................................................................................51
Chain Configuration......................................................................................................................................... 55
Balance Chain Configuration....................................................................................................................... 57
QoS Application Guide........................................................................................................................................... 59
SP/SPWRR........................................................................................................................................................... 59
Application Examples..................................................................................................................................... 59
IGMP Application Guide......................................................................................................................................... 65
Example 1.............................................................................................................................................................. 65
Example 2............................................................................................................................................................. 67
Example 3.............................................................................................................................................................69
802.1x Authentication Application Guide......................................................................................................70
802.1x Configuration Overview.................................................................................................................. 70
802.1x Timer Parameters............................................................................................................................... 73
Power over Ethernet (PoE) Application Guide...........................................................................................74
Reserved Power Determination................................................................................................................. 74
Power Management Mode............................................................................................................................75
Other PoE Parameters....................................................................................................................................76
PoE Power Scheduling & Reset..................................................................................................................77
Regulatory and Compliance Information........................................................................81
Federal Communications Commission (FCC) Notice............................................................................... 81
Industry Canada Notice CAN ICES-3 (A)/NMB-3(A)............................................................................... 81
Product Safety............................................................................................................................................................. 81
Electromagnetic Compatibility (EMC)............................................................................................................ 82
Korea EMC Statement (KCC)...............................................................................................................................82
BSMI EMC Statement - Taiwan............................................................................................................................82
Glossary...............................................................................................................................83
Table of Contents
iv ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide

Preface
This section describes the text conventions used in this document, where you can find additional
information, and how you can provide feedback to us.
Text Conventions
Unless otherwise noted, information in this document applies to all supported environments for the
products in question. Exceptions, like command keywords associated with a specific software version,
are identified in the text.
When a feature, function, or operation pertains to a specific hardware product, the product name is
used. When features, functions, and operations are the same across an entire product family, such as
ExtremeSwitching switches or SLX routers, the product is referred to as the switch or the router.
Table 1: Notes and warnings
Icon Notice type Alerts you to...
Tip Helpful tips and notices for using the product
Note Useful information or instructions
Important Important features or instructions
Caution Risk of personal injury, system damage, or loss of data
Warning Risk of severe personal injury
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide 5

Table 2: Text
Convention Description
screen displays This typeface indicates command syntax, or represents information as
it is displayed on the screen.
The words enter and type When you see the word enter in this guide, you must type something,
and then press the Return or Enter key. Do not press the Return or
Enter key when an instruction simply says type.
Key names Key names are written in boldface, for example Ctrl or Esc. If you must
press two or more keys simultaneously, the key names are linked with a
plus sign (+). Example: Press Ctrl+Alt+Del
Words in italicized type Italics emphasize a point or denote new terms at the place where they
are defined in the text. Italics are also used when referring to
publication titles.
New information. In a PDF, this is searchable text.
Table 3: Command syntax
Convention Description
bold text Bold text indicates command names, keywords, and command options.
italic text Italic text indicates variable content.
[ ] Syntax components displayed within square brackets are optional.
Default responses to system prompts are enclosed in square brackets.
{ x | y | z } A choice of required parameters is enclosed in curly brackets separated
by vertical bars. You must select one of the options.
x | yA vertical bar separates mutually exclusive elements.
< > Nonprinting characters, such as passwords, are enclosed in angle
brackets.
... Repeat the previous element, for example, member[member...].
\ In command examples, the backslash indicates a “soft” line break.
When a backslash separates two lines of a command input, enter the
entire command at the prompt without the backslash.
Documentation and Training
Find Extreme Networks product information at the following locations:
Current Product Documentation
Release Notes
Hardware and software compatibility for Extreme Networks products
Extreme Optics Compatibility
Other resources such as white papers, data sheets, and case studies
Extreme Networks oers product training courses, both online and in person, as well as specialized
certifications. For details, visit www.extremenetworks.com/education/.
Documentation and Training Preface
6ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide

Getting Help
If you require assistance, contact Extreme Networks using one of the following methods:
Extreme Portal
Search the GTAC (Global Technical Assistance Center) knowledge base; manage support cases and
service contracts; download software; and obtain product licensing, training, and certifications.
The Hub
A forum for Extreme Networks customers to connect with one another, answer questions, and share
ideas and feedback. This community is monitored by Extreme Networks employees, but is not
intended to replace specific guidance from GTAC.
Call GTAC
For immediate support: [phone] (toll-free in U.S. and Canada) or 1 [phone]. For the
support phone number in your country, visit: www.extremenetworks.com/support/contact
Before contacting Extreme Networks for technical support, have the following information ready:
•Your Extreme Networks service contract number, or serial numbers for all involved Extreme
Networks products
•A description of the failure
•A description of any actions already taken to resolve the problem
•A description of your network environment (such as layout, cable type, other relevant environmental
information)
•Network load at the time of trouble (if known)
•The device history (for example, if you have returned the device before, or if this is a recurring
problem)
•Any related RMA (Return Material Authorization) numbers
Subscribe to Service Notifications
You can subscribe to email notifications for product and software release announcements, Vulnerability
Notices, and Service Notifications.
1. Go to www.extremenetworks.com/support/service-notification-form.
2. Complete the form (all fields are required).
3. Select the products for which you would like to receive notifications.
Note
You can modify your product selections or unsubscribe at any time.
4. Select Submit.
Providing Feedback
The Information Development team at Extreme Networks has made every eort to ensure the accuracy
and completeness of this document. We are always striving to improve our documentation and help
Preface Getting Help
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide 7

you work better, so we want to hear from you. We welcome all feedback, but we especially want to
know about:
•Content errors, or confusing or conflicting information.
•Improvements that would help you find relevant information in the document.
•Broken links or usability issues.
If you would like to provide feedback, you can do so in three ways:
•In a web browser, select the feedback icon and complete the online feedback form.
•Access the feedback form at https://www.extremenetworks.com/documentation-feedback/.
•Email us at [e-mail].
Provide the publication title, part number, and as much detail as possible, including the topic heading
and page number if applicable, as well as your suggestions for improvement.
Providing Feedback Preface
8ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide

Industrial Series Switch Overview
Safety Instructions on page 9
Faceplate and Panels on page 10
LED Status Indicators on page 12
Technical Specifications on page 14
ISW-Series Managed Industrial Ethernet Switch deliver high quality, wide operation temperature range,
extended power input range, and advanced VLAN (Virtual LAN) & QoS (Quality of Service) features. It's
ideal for harsh environments and mission-critical applications.
The Managed Ethernet Switch solutions are designed for supporting standard industrial applications.
Managed switches are easier to prioritize, partition, and organize user’s network, providing a more
reliable and better quality services.
This guide covers installation for the following Industrial Switches:
•ISW 4-10/100P,2-10/100T,2-SFP
•ISW 8-10/100P,4-SFP
•ISW 4GBP,2GBT,2-SFP
•ISW 8GBP,4-SFP
Safety Instructions
When a connector is removed during installation, testing, or servicing, or when an energized fiber is
broken, a risk of ocular exposure to optical energy that may be potentially hazardous occurs, depending
on the laser output power.
The primary hazards of exposure to laser radiation from an optical-fiber communication system are:
•Damage to the eye by accidental exposure to a beam emitted by a laser source.
•Damage to the eye from viewing a connector attached to a broken fiber or an energized fiber.
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide 9

Faceplate and Panels
Figure 1: 4-Port PoE Series Faceplate
Faceplate and Panels Industrial Series Switch Overview
10 ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide

Figure 2: 8-Port PoE Series Faceplate
Front Panel
System Status LED P1, P2 and Alarm
Gigabit Ethernet Copper Ports RJ45
Gigabit Ethernet SFP ports SFP Slots
POE LED POE port status
RR/RS LED Device info/status
Industrial Series Switch Overview Faceplate and Panels
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide 11

Figure 3: Top Panel
Top Panel
Power Input (Dual) 6P Terminal Block
Console (RS232) RJ45
Reset Push Button
LED Status Indicators
Table 4: LED Status Indicators
LED State Description
P1
On Green P1 power line has power
O P1 power line disconnect or does not
have supply power
P2
On Green P2 power line has power
O P2 power line disconnect or does not
have supply power
Alarm On Red Alarm event occurs
O No alarm
Copper ports Link/Act
On Green Ethernet link up but no trac is detected
Flashing Green Ethernet link up and there is trac
detected
O Ethernet link down
Copper ports Speed
On Amber A 100 Mbps or a 1000 Mbps connection
is detected
O No link or a 10 Mbps connection is
detected
LED Status Indicators Industrial Series Switch Overview
12 ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide

Table 4: LED Status Indicators (continued)
LED State Description
SFP port Link/Act On Green Ethernet link up
O Ethernet link down
SFP port
Speed
On Amber SFP port speed 1000 Mbps connection is
detected.
O No link or a SFP port speed 100Mbps
connection is detected
RR (Redundant Role) On Redundant Master (Ring Master, Ring
Coupling Backup, Dual Homing, Chain
Head, Balancing Chain Central Block ) is
enabled in the system.
O No Redundant Master is enabled in the
system.
RS (Redundant Status) On 1. If any Ring port links are down, the RS
LED will be ON.
2. If the device has any of Redundant
Master (Ring Master, Ring Coupling
Backup, Dual Homing, Chain Head,
Balancing Chain Central Block ) and
detects a Ring/Coupling/Dual
Homing/Chain/Balancing Chain
failure (any node is link down), and
then RS LED will be ON.
O All of the Ring ports are link up or Ring/
Coupling/Dual Homing/Chain/Balancing
Chain is healthy.
Industrial Series Switch Overview LED Status Indicators
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide 13

Technical Specifications
Ethernet
Operating mode Store and forward, L2 wire-speed/non-blocking switching engine
MAC addresses 8K
Jumbo frames 9K Bytes
Copper RJ45 Ports
Speed 10/100/1000 Mbps
Technical Specifications Industrial Series Switch Overview
14 ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide

MDI/MDIX Auto-crossover Support straight or cross wired cables
Auto-negotiating 10/100/1000 Mbps speed auto-negotiation; Full and half duplex
Ethernet isolation 1500 VRMS 1 minute
SFP (pluggable) Ports
Port types supported SFP (pluggable) Ports 100/1000Base SFP slot
Support 100/1000BaseT SFP transceiver
Fiber port connector LC typically for fiber (depends on module)
Optimal fiber cable Typical 50 or 62.5/125 μm for multimode (mm);
Typical 8 or 9/125 μm for single mode (sm)
Network Redundancy
Fast failover protection rings Single & Multiple rings supported
Spanning Tree Protocol IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP
Port Trunk with LACP Static trunk or Dynamic via LACP
Bridge, VLANs & Protocols
Flow control IEEE 802.3x (Full Duplex) and Back-Pressure(Half Duplex)
VLAN Types Port-based VLANs
IEEE 802.1Q tag-based VLANs
IEEE 802.1ad Double Tagging (Q in Q)
Multicast protocols IGMP (Internet Group Management Protocol) v1, v2
IGMP snooping and querying
Immediate leave and leave proxy
Throttling and filtering
LLDP (Link Layer Discovery
Protocol)
IEEE 802.1ab LLDP
Trac management & QoS
Priority IEEE 802.1p QoS
Number of queues per port 8
Scheduling schemes SPQ, WRR
Trac Shaper Port-based shaping
Security
Port security IP and MAC-based access control
IEEE 802.1X authentication Network Access Control
Power
Power input Redundant Input Terminals
Input voltage range
Max. power consumption
Non-POE mode: 12–58 VDC
802.3af POE mode 46–58 VDC
802.3at POE mode 50–58 VDC
Power Consumption: 15 Watts without POE PD loading
Reverse power protection Yes
Total PoE output power budget
PoE PSE port output power
management
120W (ISW 16801) / 240W (ISW 16803)
Scheduling; power control; PoE PD power consumption monitoring
Industrial Series Switch Overview Technical Specifications
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide 15

Transient protection 15,000 watts peak
Indicators
Power Status indication Indication of power input status
Ethernet port indication Link & Speed
Management
User Management interfaces • CLI
• Web-based Management
•SNMP (Simple Network Management Protocol) v1, v2c
• Telnet (5 sessions)
Management Security HTTPS, SSH
Radius Client for Management
Upgrade & Restore Configuration Import/Export
Firmware Upgrade
Diagnostic Syslog
Per-VLAN mirroring
SFP with DDM (Digital Diagnostic Monitoring)
MIBs RMON 1,2,3,9; Q-Bridge MIB,
RFC 1213 MIB-II, RFC 4188 Bridge MIB
DHCP (Dynamic Host
Configuration Protocol)
Client, Server, Relay, Snooping, Option 82
NTP/SNTP (Simple Network
Time Protocol)
Yes
Environmental & Compliances
Operating temperature range -40 to +75°C (cold startup at -40°C)
Storage temperature range -40 to +85°C
Humidity (non-condensing) 5 to 95% RH
Vibration, shock & freefall IEC68-2-6, -27, -32
Certification compliance CE/FCC; EN-50121-4
Electrical safety CSA C22, EN61010-1, CE
EMC FCC Part 15, CISPR 22 (EN55022) Class A
IEC61000-4-2, -3, -4, -5, -6
RoHS and WEEE RoHS (Pb free) and WEEE compliant
MTBF > 25 years
Mechanical
Ingress protection IP30
Installation option
Dimension
Weight
DIN-Rail mounting, Wall mounting
77mm W x 154mm H x 128mm D (3 in. W x 6 in. H x 5 in. D)
Unpackaged:1.49kg (3.3 lb.); Packaged: 1.99kg (4.4 lb.)
Technical Specifications Industrial Series Switch Overview
16 ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide

System Statistics
Function Name System Max Value
VLAN ID 4096
VLAN Limitation 2048
Privilege Level of User 15
RMON Statistic Entry 65535
RMON Alarm Entry 65
RMON Event Entry 65535
IPMC Profile 64
IPMC Rule / Address Entry 128
ACE 256
ICMP Type / Code 255
RADIUS (Remote Authentication Dial
In User Service) Server
5
TACACS+ Server 5
MAC-based VLAN Entry 256
IP subnet-based VLAN Entry 128
Protocol-based VLAN Group 125
Voice VLAN OUI 16
QCE 256
IP Interface 8
IP Route 32
Security Access Management 16
MVR VLAN 4
MAC Learning table address 8k
IGMP Group 1000
Industrial Series Switch Overview System Statistics
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide 17

Installing Industrial Switches
Mounting the ISW (DIN-Rail) on page 18
Mounting the ISW (Wall) on page 19
Connecting the Ethernet Interface (RJ45 Ethernet) on page 20
Connecting the Ethernet Interface (Fiber) on page 21
Connecting the Power Terminal Block on page 23
Alarm Relay and Ground Connection on page 23
Console Connection on page 24
System Reset on page 25
Connecting & Logging in to the Switch on page 26
Monitoring the Ethernet Interface on page 27
Upgrading and Downgrading Software on page 27
Resetting Configuration Defaults via CLI Command on page 27
Resetting Configuration Defaults via Web UI on page 28
Mounting the ISW (DIN-Rail)
Mounting steps:
1. Screw the DIN-Rail bracket on with the bracket and screws in the accessory kit.
2. Hook the unit over the DIN rail.
3. Push the bottom of the unit towards the DIN Rail until it snaps into place.
18 ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide

Figure 4: DIN-Rail Mounting
Mounting the ISW (Wall)
Attach the wall-mounting plates with the screws provided in the accessory kit.
Installing Industrial Switches Mounting the ISW (Wall)
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide 19

Connecting the Ethernet Interface (RJ45 Ethernet)
ISW provides two types of electrical (RJ45) and optical (mini-GBIC) interfaces.
•To connect to a PC, use a straight-through or a cross-over Ethernet cable.
•To connect the ISW copper port to an Ethernet device, use UTP (Unshielded Twisted Pair) or STP
(Shielded Twisted Pair) Ethernet cables.
The pin assignment of RJ45 connector is shown in Figure 5 and Table 5
Connecting the Ethernet Interface (RJ45 Ethernet) Installing Industrial Switches
20 ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide