CIA111
Interfaces — archItectural serIes Interfaces
speCifiCations
Video
Gain ................................ Unity
Bandwidth ........................ 250 MHz (-3 dB)
Video input and loop-throuGh
Number / Signal type........... 1 VGA-UXGA, Mac, Sun RGBHV, RGBS, RGsB
1 buffered local monitor loop-through identical to the input
NOTE: Sync is not stripped from green. RGsB input signals are output as RGsB.
Connectors ....................... 2 female 15-pin HD
Nominal level .................... 0.7 Vp-p for RGB
Minimum / Maximum levels. . . Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain
Impedance........................ 75 ohms
Horizontal frequency............ 30 kHz to 130 kHz
Vertical frequency............... 30 Hz to 120 Hz
Return loss ....................... <-50 dB @ 5 MHz
Video output
Number / Signal type........... 1 RGBHV, RGBS, RGsB
Connectors ....................... 5 BNC female on 4" (10.2 cm) pigtails
Nominal level .................... 0.7 Vp-p for RGB
Minimum / Maximum levels. . . Analog: 0.3 V to 1.5 Vp-p
Impedance........................ 75 ohms
Return loss ....................... <-50 dB @ 5 MHz
synC
Input type ......................... RGBHV, RGBS, RGsB
Output type ....................... RGBHV, RGBS, RGsB
Input level ........................ 2.0 V to 5.0 Vp-p
Output level ...................... TTL: 5.0 Vp-p, unterminated
Input impedance ................ 510 ohms
Output impedance .............. 75 ohms
Max. propagation delay ........ 1.2 µs
Polarity ............................ Positive or negative (follows input)
audio
Gain ................................ Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response ............ 20 Hz to 20 kHz, ±0.4 dB
THD + Noise...................... 0.03% @ 1 kHz at nominal level, 0.1% @ 20 kHz at maximum output
S/N ................................. >75 dB at maximum output
Stereo channel separation . . . . >-113 dB @ 1 kHz to 20 kHz
audio input
Number / Signal type........... 1 stereo, unbalanced
Connectors ....................... (1) 3.5 mm mini stereo jack
Impedance........................ >10k ohms unbalanced
Nominal level .................... -10 dBV (316 mV)
Maximum level .................. +8.1 dBu, (balanced or unbalanced) at 1%THD+N
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
audio output
Number / Signal type........... 1 stereo, balanced/unbalanced
Connectors ....................... 1 direct insertion captive screw connector, 5 pole
Impedance........................ 50 ohms unbalanced, 100 ohms balanced
Gain error ......................... ±0.09 dB channel to channel
Maximum level (Hi-Z) ........... >+15 dBu, balanced or unbalanced at 1%THD+N
Maximum level (600 ohm) ..... >+13 dBm, balanced or unbalanced at 1%THD+N
General
External power supply ......... 100 VAC to 240 VAC, 50/60 Hz, external, universal; to 9 VDC, 0.6 A, regulated
Power input requirements..... 9 VDC, 0.5 A
Temperature / Humidity........ Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Rack mount ...................... No, but wall or furniture mountable
Enclosure type ................... Metal
Enclosure dimensions
Faceplate .......................... 4.5" H x 5.0" W x 0.1" D (11.4 cm H x 12.7 cm W x 0.2 cm D) (2 gang)
Device.............................. 2.8" H x 1.9" W x 1.5" D (7.1 cm H x 4.8 cm W x 3.8 cm D)
(Depth excludes connectors.)
Product weight .................. 0.7 lbs (0.3 kg)
Shipping weight ................. 3 lbs (2 kg)
Vibration .......................... ISTA 1A in carton (International Safe Transit Association)
Listings............................ ETL (UL1950)
Compliances ..................... CE
MTBF .............................. 30,000 hours
Warranty .......................... 3 years parts and labor
NOTE: All nominal levels are at ±10%. Specifications are subject to change without notice.
40