99-10
68-472-01
REV. A
Video input
Number/type .................................. 1 analog RGBHV, RGBS,
RGsB, RsGsBs
Connectors –RGB 508 AKM ........ 1 9-pin D male,
MBC/LBC cable or buffer
Connectors –RGB 558 AKM ........ 1 15-pin HD male (Mac
and Sun/SGI to VGA
adapter cables are available.)
Nominal level(s) ............................ Analog –0.3V to 1.45V p-p
Maximum level(s) ............................ Analog –1.5V p-p
Impedance ...................................... 75 ohms or High Z,
switchable (set to 75 ohms
if no local monitor is
connected)
Horizontal frequency ...................... Autoscan 15 kHz to 130 kHz
Vertical frequency ............................ Autoscan 30 Hz to 120 Hz
Return loss ...................................... -30dB @ 5 MHz
Maximum DC offset ...................... 4.0V
Video throughput
Gain .............................................. Unity (0.700V),
0.725V with 50% peaking,
0.750V with 100% peaking
Bandwidth ...................................... 300 MHz (-3dB)
Video output
Number/type/format ...................... 1 analog RGBHV, RGBS,
RGsB
Connectors –Both interfaces .......... 5 BNC female
Connectors –RGB 558 AKM ........ 1 15-pin HD female for
buffered local monitor output
Nominal level ................................ 0.700V p-p, 0.725V p-p,
0.750V p-p
Impedance ...................................... 75 ohms
Return loss ...................................... -30dB @ 5 MHz
Sync
Input type ...................................... RGBHV TTL (±), RGBS
TTL (±), RGsB 0.3V (-),
RsGsBs 1.3V (-)
Output type .................................... RGBHV (±), RGBS(±),
RGsB (-)
Input level ...................................... 2.0V to 5.5V p-p with
±0.3VDC offset (max.)
Output level .................................. 4.0V to 5.0V p-p
Input impedance ............................ 10 kohms
Output impedance .......................... 75 ohms
Max. propagation delay .................. 48 nS
Max. rise/fall time............................ 3.5 nS
Polarity
RGBHV ................ Polarity follows input when RGBHV is
input and the internal sync polarity switch is
set to follow. Sync polarity is negative if the
sync polarity switch is set to negative
RGBS, RGsB ........ Negative
Audio input
Number/type .................................. 1 PC level stereo, unbalanced
Connectors .................................... 1 3.5 mm stereo jack,
2 channel; tip (L), ring (R),
sleeve (ground)
Impedance ...................................... 10 kohms, DC coupled
Minimum level ................................ 100mV
Maximum level .............................. +8.5dBu, (unbalanced) @
stated %THD+N
Audio throughput
Gain .............................................. Unbalanced 0dB,
balanced +6dB
Frequency response ........................ ±0.05dB 20 Hz to 20 kHz
THD + Noise ................................ 0.03% @1 kHz,
0.3% @ 20 kHz at rated
maximum output drive
S/N ................................................ >90dB, output 14dBu,
balanced
Stereo channel separation ................ >95dB @ 1 kHz to 20 kHz
Audio output
Number/type .................................. 1 stereo (2 channel),
balanced/unbalanced
Connectors .................................... 3.5 mm stereo captive screw
terminal, 5 conductor, for
left and right output
Impedance ...................................... 50 ohms, unbalanced,
100 ohms balanced
Gain error ...................................... ±0.1dB channel to channel
Drive (600 ohm) ............................ > +14dBu, balanced at
stated %THD+N
General
Power .............................................. 12 to 24VAC or VDC,
0.5 A, 5 Watts, external
(Order the power supply
separately, part #70-055-01.)
Temperature/humidity
Storage .......................................... -40°to +158°F
(-40°to +70°C) / 10% to
90%, non-condensing
Operating .................................... +32°to +104°F
(0°to +40°C) / 10% to
90%, non-condensing
Rack mount .................................... No
Enclosure type ................................ Ackermann GES9B
Enclosure dimensions
Faceplate........................................ 2.78" H x 7.94" W
(7.06 cm H x 20.17 cm W)
Interface enclosure ........................
3.08" H x 8.13" W x 1.62" D
(7.82 cm H x 20.64 cm W x 4.12 cm D)
Shipping weight .............................. 3 lbs (1.4 kg)
Vibration ........................................ NSTA 1A in carton
(National Safe Transit Assoc.)
Approvals ........................................ UL, CE, FCC Class A
MTBF ............................................ 30,000 hours
Warranty ........................................ 2 years parts and labor
Part Numbers
RGB 508 AKM .............................. 60-313-01
RGB 558 AKM .............................. 60-314-01
SPECIFICATIONS