Eyedaptic EYE4 User manual

www.eyedaptic.com
EYE4
Eyedaptic Glasses User Manual
Version 3.2.10.16
Enhancing Vision To Revitalize Life
®
1

Package Contents
(A) EYE4 glasses
2
(B) Mobile phone with pre-installed
software to control EYE4 glasses
(C) Data cable to connect glasses to
phone
(D) USB charger block
(E) Charging cable for the PHONE only
*Cables (C) and (E) are NOT interchangeable

3
EYE4 Glasses (A) - Parts Overview
EYE4 connection port
Use the included data cable to
connect the phone to the glasses
Must use this data cable (C) for the
glasses to work

EYE4 Phone (B) –Parts Overview
Charging and connection port
This same port is used for charging the phone
and for connecting the phone to the glasses
EYE4 control app icon
(visible when powered on)
Power button
Hold down button
for 5 seconds to
power on/off
phone and glasses
entirely
4

•To power on the phone: hold the power button for
5 seconds, or until the screen lights up
•To power off the phone: hold the power
button for 5 seconds and then click "Power Off"
and the screen will go dark
How to Power On/Off
5
Power button
"Power Off"

6
How to Charge the Phone
Only the phone needs to be charged, the glasses do not need to be charged
1. Plug the charging cable (E)
into the charging block (D)
2. Plug the charging cable (E)
into the phone (B)
DO NOT USE THE DATA CABLE FOR CHARGING
3. Plug the charger into an outlet
4. Charge until the phone
battery reaches 100%
(A)
(D)
(E)

7
Sleep Mode
To activate sleep mode: press the power button once (top
right) - the phone screen AND glasses will go dark
To exit sleep mode: press the power button again (top right)
- the phone screen AND glasses will turn back on
Sleep mode puts the phone display and the glasses to sleep, but does not
completely turn off the device –this will save battery
Power
button
Phone is in sleep mode,
glasses are off

Setting up the Phone & Glasses
1. Before using EYE4 glasses for the first time:
a) Fully charge the phone battery, until light at the top of the
phone turns green or percentage on the phone is 100%
2. After the battery is charged:
a) Make sure the phone is not connected to any cables
b) Power on the phone by holding down the power button
c) This phone takes several seconds to start up and shows
various screens before it is ready to use
8
READY TOGO

Setting up the Phone & Glasses
1. Connect the phone to the glasses:
a) To do this, plug the data connection cable (C) into the glasses
(A) and the other side into the phone (B)
2. Wait for the EYE4 app to launch automatically or press the
Eyedaptic logo to start the app
a) If the app does not open, unplug the cable from the phone, wait 5 seconds,
plug the cable back in, and try again
3. The first time the app is opened, a EULA acceptance will pop
up –this must be accepted to use the app
9
(A)
(B)
(C)

10
Home Page Overview
Toggles
autozoom
on/off
Toggles
Britext
on/off
Opens up
the settings
menu
Scroll up or down to see
additional features
Set favorite
features
Slide along the bar to
manually change magnification
(when autozoom is OFF)
Turns
EyeSwitch
on
Home Page

11
EyeSwitch changes the mode of viewing from the camera on
the glasses to the camera on the phone
Turns
EyeSwitch
on
In EyeSwitch mode
the settings options
are simplified to just
Autozoom and Britext
Home Page
Turns
EyeSwitch
off

12
Settings
Opens up the
settings page
Returns to
home page
Scroll up or
down to see
all menu
options
Home Page

13
Manual Zoom
Slide along the bar to
manually change magnification
(when autozoom is OFF)
Manual zoom allows the user to control full-screen magnification
by adjusting the zoom slider at the bottom of the home screen
Magnification –fades,
reappears when adjusted
Home Page

14
Autozoom
Toggles
autozoom
on/off
Autozoom prompts the glasses to automatically zoom in on text or
objects when detected
Can also access
autozoom from
the settings page
Home Page

15
Autozoom
A box will appear on
the screen and
prompt the zoom
Read text with slow
head motion
It will zoom to preferred
text size, which is
rememberedwhen
manually adjusted
Large head movement
or a quick shake will
zoom back out
Autozoom prompts the glasses to automatically zoom in on text or
objects when detected
Home Page

16
Autozoom - Settings
Additional autozoom settings can be adjusted from the settings page
Toggles
autozoom
on/off
Adjust how much
head motion is needed
to zoom out of autozoom
Controls how
quickly the
glasses
recognize text
Settings

17
Britext
Britext mode is a contrast enhancement that outlines the edges of text
and objects, making them easier to distinguish
Toggles
Britext
on/off
Britext off
Britext on
Home Page

18
Contrast
Contrast options can be opened from either
the home page or the settings page
Home Page

19
Contrast
Slide to manually adjust the contrast
0% is NORMAL contrast and
is best for most situations
Home Page

20
Brightness
Brightness options can be opened by either scrolling
down on the home page or from the settings page
Slide up and
down to
change the
brightness of
the GLASSES
display
Home Page