EZ Lift Assist User manual

ASSEMBLY INSTRUCTIONS For more information, Call 727.518.9773 x200
EZ Lift Tray and Seat Cushion not included. Purchase separately.
19mm Wrench
M5 Hex Key
First, remove all parts from the package, and lay
everything out. Rotate Parts B down and slide into the
base of Part A until the holes line up. Insert bolt (K) into
holes on both sides. Tighten all bolts securely. Remove the
push handle (Part H) from lower seat hinges. Then, attach the
front caster wheels with the appropriate screws provided.
Place the left and right seat halves (C and E) on lower
hinges.
1
2
Place latch parts on the tube seat frame as indicated with
Part I on the right, and Part J on the left. Then put the
upper seat tubing (D and F) on the upper hinge and its
appropriate latch partner simultaneously.
3
12 3
K x2
Caster Screw x8
D
F
J
I
AH
E
C
Lower Hinges
K
K
B
B
A
B
C
D
E
F
G
H
I
J
K
L
x1
x2
x1
x1
x1
x1
x2
x1
x1
x1
x4
x4

ASSEMBLY INSTRUCTIONS For more information, Call 727.518.9773 x200
EZ Lift Tray and Seat Cushion not included. Purchase separately.
19mm Wrench
M5 Hex Key
Place lift chair push handle (H) on the top of Part A as
indicated and secure with a Tube Pin on each side. Then
secure latch Parts I & J with Tube Pins (x4) as indicated.
4Fasten foot pedals (G) to Part A with four hex key screws
and nuts (L) using a 5mm hex key and a 14mm wrench.
5
WARNING: Weight Limit 400lbs/180kg
CAUTION
MAKE SURE PATIENT IS LATCHED IN AND SEATED
BEFORE MOVING.
DO NOT STAND ON SEAT AT ANY TIME.
LIFT CHAIR IS NOT A STEP STOOL.
ONLY USE CHARGER PROVIDED WITH EZ LIFT.
BATTERY MUST NOT BE CLOSE TO
EXTREME HEAT OR COLD.
MAX 104OF/MIN -4OF
45
Tube Pin x6
H
G
L
L
L
L
Tube Pin
Tube Pin Power button (On/Off)
Charging Port
Electrical box
A
B
C
D
E
F
G
H
I
J
K
L
x1
x2
x1
x1
x1
x1
x2
x1
x1
x1
x4
x4
L x4