EZCast EZC-5200 User manual

Product information is subject to change without prior notice.
Rev 1.1
USB Wifi Adapter
Quick Start Guide

Introduction
1
This USB wifi adapter supports both 2.4G and 5G to add Wi-Fi
functionality to your laptops and projectors. Furthermore, it’s
able to turn ethernet into wireless router that shares wifi for
other devices. The bluetooth transmitter and receiver attached
in wifi adapter allow your PC to connect to bluetooth devices
wirelessly. Enjoy your smart wireless life with EZCast!
Good
Compatibility
Wider
Coverage
Hot
Spot
High
Speed
MU-
MIMO

1. Find the driver from the internal memory or download it at
https://www.ezcast.com/app/ezcast/wifi-adapter/windows.
Double click “Installer.exe.”
2. Run the installation of wifi driver.
For bluetooth, please run the installation of bluetooth driver
with internet connection.
2
Windows 8 / 7 / XP
install wifi driver
install bluetooth driver
enable hotspot and windowsRX
Installer.exe
The driver shall be installed automatically once the USB Wifi
adapter is plugged in. Windows 10 supports wifi and bluetooth
driver.
Tips: If the driver failed to
install automatically, please
try to install it manually.
(Please refer to Windows
8/7/XP installation method)
Note:
Windows XP does NOT support the bluetooth driver.
Windows 10
EZCa st
1 2

Scan the QRcode for more information
3
MacOS
Wifi adapter Mac OS Wi-Fi
Driver Download
Download
1 2
Uninstaller.pkg
Installer.pkg
Release_RTWlanU_
Note:
MacOS does NOT support the bluetooth driver.
The wifi driver shall be installed manually from our website:
https://www.ezcast.com/app/ezcast/wifi-adapter/macos

FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body
©2019 Actions Microelectronics Co., Ltd. All right reserved.
EZCast are trademarks of Actions Microelectronic Co., Ltd.,
registered in US, Europe, and other countries. Other product
and company names mentioned herein may be trademarks
other respective companies.

Product informations
Visit https://www.EZCast.com for more information.
Visit https://www.YouTube.com/EZCast for video tutorials.
Learn More
Transmission 600Mbps
Antenna Onboard
Bluetooth Bluetooth 4.2
Driver Auto installation
Standard IEEE 802.11b/g/n/a/ac
Interface USB 2.0