EZE GO LCD DISPLAY User manual

EZEGO LCD DISPLAY GUIDE

CONTENTS
3KEY FEATURES
4MAIN FUNCTIONS
5PARAMETER SETTINGS
9ERROR AND WARNING CODES
EZEGO LCD DISPLAY GUIDE
2

KEY FEATURES
|AVG Speed, MAX Speed, CURRENT Speed
|Odometer/Trip distance/Riding time
|Kilometer / Mile : Can be set according to your requirement
|Smart battery indicator
|5-level assist
EZEGO LCD DISPLAY GUIDE
3

MAIN FUNCTIONS
EZEGO LCD DISPLAY GUIDE
ASSISTANCE DOWN /
WALK ASSIST (HOLD)
ASSISTANCE UP /
LIGHTS ON/OFF (HOLD)
SCREEN
MODE
POWER
Power ON/OFF: Press and hold Power button for 1
second to turn the display on/off .
Assist Level Operation: Short press the + / -
buttons to change the assist level.
On-screen information change: Short press the
Menu button to switch between information
(Average Speed - Max Speed - Trip - Odometer -
Time)
Lights/Backlight On/Off: Press and hold the UP
button for 1 second to turn the backlight on/off, and
also the lights if applicable.
Walking Mode (6km/h): Press and hold the -
button for 2 second to enable walking mode.
Release to stop.
4

PARAMETER SETTINGS
SETTINGS SCREEN 1 - RESET TEMPORARY INFORMATION
EZEGO LCD DISPLAY GUIDE
Press the M button (press no less than 2 seconds) to get into the setting menus.
Short pressing the M button will then switch to next item.
Pressing the M button (press no less than 2 seconds) will exit from menu.
You will see the flashing “n” in
the bottom right of the screen.
Press either the + or the - button
and this will change to a “y”. If
you exit the settings mode with
the “y” flashing, your temporary
data (Trip, ride time, max speed,
average speed) will be reset.
Cr nCr y
5

MPH
Mile
57
Km/H
Km
57
SETTINGS SCREEN 2 - SWITCH BETWEEN MPH AND KPH
EZEGO LCD DISPLAY GUIDE
You will see the units your speed
/ distance is currently being
displayed in flashing. Pressing
the + or - buttons will switch
between the two. Whichever is
flashing when you exit the
settings mode will be the one
you are set in.
SETTINGS SCREEN 3 - BACKLIGHT BRIGHTNESS
You will see a number flashing in the bottom right hand
side of your screen. Pressing + / - will increase or decrease
the brightness of back light of the display.
61 3
6

SETTINGS SCREEN 4 - AUTO SWITCH-OFF TIME
EZEGO LCD DISPLAY GUIDE
You will see a number flashing in the bottom right hand
side of your screen. Pressing + / - will change the auto
power off time from 0 to 15. The number represents time
(minutes) to shutdown, OFF means disable auto-off
function, default value is 5 minutes.
OF 5
SETTINGS SCREEN 5 - WHEEL SIZE
You will see the wheel size setting in the bottom right hand
side. Pressing + / - will switch between wheel size setting.
This is not recommended as it will cause the display to
mis-read speed and distance information from the
motor. Please note this will not increase the speed of
assistance from the motor.
700C
7

SETTINGS SCREEN 6 - VOLTAGE SETTING
EZEGO LCD DISPLAY GUIDE
You will see the voltage setting in the bottom right hand
side. Pressing + / - will switch between voltage setting. This
is not recommended as it will cause the display to
mis-read information from the system. Please note this
will not increase the speed of assistance from the
motor.
60 36
8

EZEGO LCD DISPLAY GUIDE
ERROR AND WARNING CODES
Our LCD display can
show warning
messages. The
engine icon shows
on the screen, with
an error code at the
bottom of the
screen.
9