WIRING DIAGRAM
1 - AUDIO WIRE / VIDEO WIRE / POWER WIRE
2 - GROUND WIRE
DOOR CAMERA
VIDEO DOOR PHONE (VDP)
LOCK
INSTALLATION
A. Video Door Phone Installation
1. Fix the bracket of the VDP on the wall with screws.
2. Hang the monitor on the bracket after finishing the wire connection.
Plug the enclosed adapter into the sockets of AC power and the monitor.
B. Door Camera Installation
1. Loosen off the screws located at the bottom of the door camera.
2. Loosen off the four screws in the back cover, and then take apart the front cover.
3. Take off the name plate for marking family name or room name, and then fix the
screws of the back cover.
4. Install the door camera at the height of 4.6 to 5.6 feet.
5. Fix the bracket of the door camera on the wall by tightening screws, and then fix
the screws at the bottom of the door camera.
Terminals 1 & 2 of the door camera connects to CAMERA terminals 1 & 2 of the VDP
accordingly. The lock connects to terminals 3 & 4 of the door camera.
EV-207 kit includes 15M wire. For extension to 15-50M, please use 18AWG wire; for
extension to 50-100M, please use 16AWG wire.
DC15V
CAMERA
POWER
2
1
ADAPTER
-
+
2
1
1 2 3 4
3/4