Ezviz CS-X5-108T User manual

Operation/Fonctionnement/Operaciones
ENGLISH
Install the EZVIZ International App
Search “EZVIZ” on the App Store or Google PlayTM to install the EZVIZ
International app.
Launch the app and register.
Search “EZVIZ” on the App Store or Google PlayTM to install the EZVIZ
International app.
Launch the app and register.
6
Connect Cameras to DVR
Find the yellow BNC connectors of the Power + Video cable. Connect one end of the
BNC connector to the camera’s BNC connector and the other end to the DVR’s BNC
connector.
1
Access the DVR
7
Connect the Network Cable
4Connect the DVR to the router with a network cable via the network port.Connect the DVR to the router with a network cable via the network port.
(Recommended) You can access the DVR through the EZVIZ International App. Find
the QR code on the upper surface of the DVR or the start-up wizard on the display.
Log into the EZVIZ International App, scan the QR code, and then follow the
prompts to add the DVR to the EZVIZ account.
You can also access the DVR by operating the local menu. A start-up wizard will
pop up on the screen after the DVR starts, click the Start Wizard button, and follow
the wizard to set the DVR.
(Recommended) You can access the DVR through the EZVIZ International App. Find
the QR code on the upper surface of the DVR or the start-up wizard on the display.
Log into the EZVIZ International App, scan the QR code, and then follow the
prompts to add the DVR to the EZVIZ account.
You can also access the DVR by operating the local menu. A start-up wizard will
pop up on the screen after the DVR starts, click the Start Wizard button, and follow
the wizard to set the DVR.
Connect the External Display and Mouse
3
Connect the monitor and DVR with the HDMI cable (included) if you want to
operate the system with the local menu. The DVR also supports VGA output (VGA
cable not included).
Connect the mouse to DVR via the USB port.
Connect the monitor and DVR with the HDMI cable (included) if you want to
operate the system with the local menu. The DVR also supports VGA output (VGA
cable not included).
Connect the mouse to DVR via the USB port.
Start Up the DVR
5Connect the DVR to the power socket with the power cable.
For the CS-X5-108T and CS-X5-116T only, turn on the power switch on the rear
panel to start the DVR.
ESPAÑOL
Conexión de las cámaras al DVR
1
POWER WAN LAN2 LAN4LAN1 LAN3 WPS/
RESET
VIDEO IN
AUDIO
IN
OUT
The figures in this manual are for reference only and may differ from the actual
product.
Las figuras de este manual solo se incluyen a modo de referencia y pueden no ser
idénticas al producto en cuestión.
1
2
VIDEO IN
AUDIO
IN
OUT
1
2
Find the red power connectors of the Power + Video Cable.
Connect one end of the red power connector to the camera’s power input, and
the other end to the Isolated Power Module.
Then use the 1-to-4 power cable if you have many cameras to connect
(Optional). Connect the Power + Video cable or 1-to-4 power cable to the
Camera Power Adapter.
Plug the camera power adapter into a power socket to power on the camera(s).
Power on the Camera(s)
2
1
2
3
1
2
4
1
2
3
4
1
2
VIDEO IN
AUDIO
IN
OUT
1
2
VIDEOIN
AUDIO
IN
OUT
......
Localice los conectores BNC amarillos del cable de alimentación + vídeo. Conecte
un extremo del conector BNC al conector BNC de la cámara y el otro extremo al
conector BNC del DVR.
VIDEOIN
AUDIO
IN
OUT
......
UD.6L0208B0027A01

Operation/Fonctionnement/Operaciones
ENGLISH
Install the EZVIZ International App
Search “EZVIZ” on the App Store or Google PlayTM to install the EZVIZ
International app.
Launch the app and register.
Search “EZVIZ” on the App Store or Google PlayTM to install the EZVIZ
International app.
Launch the app and register.
6
Connect Cameras to DVR
Find the yellow BNC connectors of the Power + Video cable. Connect one end of the
BNC connector to the camera’s BNC connector and the other end to the DVR’s BNC
connector.
1
Access the DVR
7
Connect the Network Cable
4Connect the DVR to the router with a network cable via the network port.Connect the DVR to the router with a network cable via the network port.
(Recommended) You can access the DVR through the EZVIZ International App. Find
the QR code on the upper surface of the DVR or the start-up wizard on the display.
Log into the EZVIZ International App, scan the QR code, and then follow the
prompts to add the DVR to the EZVIZ account.
You can also access the DVR by operating the local menu. A start-up wizard will
pop up on the screen after the DVR starts, click the Start Wizard button, and follow
the wizard to set the DVR.
(Recommended) You can access the DVR through the EZVIZ International App. Find
the QR code on the upper surface of the DVR or the start-up wizard on the display.
Log into the EZVIZ International App, scan the QR code, and then follow the
prompts to add the DVR to the EZVIZ account.
You can also access the DVR by operating the local menu. A start-up wizard will
pop up on the screen after the DVR starts, click the Start Wizard button, and follow
the wizard to set the DVR.
Connect the External Display and Mouse
3
Connect the monitor and DVR with the HDMI cable (included) if you want to
operate the system with the local menu. The DVR also supports VGA output (VGA
cable not included).
Connect the mouse to DVR via the USB port.
Connect the monitor and DVR with the HDMI cable (included) if you want to
operate the system with the local menu. The DVR also supports VGA output (VGA
cable not included).
Connect the mouse to DVR via the USB port.
Start Up the DVR
5Connect the DVR to the power socket with the power cable.
For the CS-X5-108T and CS-X5-116T only, turn on the power switch on the rear
panel to start the DVR.
ESPAÑOL
Conexión de las cámaras al DVR
1
POWER WAN LAN2 LAN4LAN1 LAN3 WPS/
RESET
VIDEO IN
AUDIO
IN
OUT
The figures in this manual are for reference only and may differ from the actual
product.
Las figuras de este manual solo se incluyen a modo de referencia y pueden no ser
idénticas al producto en cuestión.
1
2
VIDEO IN
AUDIO
IN
OUT
1
2
Find the red power connectors of the Power + Video Cable.
Connect one end of the red power connector to the camera’s power input, and
the other end to the Isolated Power Module.
Then use the 1-to-4 power cable if you have many cameras to connect
(Optional). Connect the Power + Video cable or 1-to-4 power cable to the
Camera Power Adapter.
Plug the camera power adapter into a power socket to power on the camera(s).
Power on the Camera(s)
2
1
2
3
1
2
4
1
2
3
4
1
2
VIDEO IN
AUDIO
IN
OUT
1
2
VIDEOIN
AUDIO
IN
OUT
......
Localice los conectores BNC amarillos del cable de alimentación + vídeo. Conecte
un extremo del conector BNC al conector BNC de la cámara y el otro extremo al
conector BNC del DVR.
VIDEOIN
AUDIO
IN
OUT
......
UD.6L0208B0027A01

Operation/Fonctionnement/Operaciones
ENGLISH
Install the EZVIZ International App
Search “EZVIZ” on the App Store or Google PlayTM to install the EZVIZ
International app.
Launch the app and register.
Search “EZVIZ” on the App Store or Google PlayTM to install the EZVIZ
International app.
Launch the app and register.
6
Connect Cameras to DVR
Find the yellow BNC connectors of the Power + Video cable. Connect one end of the
BNC connector to the camera’s BNC connector and the other end to the DVR’s BNC
connector.
1
Access the DVR
7
Connect the Network Cable
4Connect the DVR to the router with a network cable via the network port.Connect the DVR to the router with a network cable via the network port.
(Recommended) You can access the DVR through the EZVIZ International App. Find
the QR code on the upper surface of the DVR or the start-up wizard on the display.
Log into the EZVIZ International App, scan the QR code, and then follow the
prompts to add the DVR to the EZVIZ account.
You can also access the DVR by operating the local menu. A start-up wizard will
pop up on the screen after the DVR starts, click the Start Wizard button, and follow
the wizard to set the DVR.
(Recommended) You can access the DVR through the EZVIZ International App. Find
the QR code on the upper surface of the DVR or the start-up wizard on the display.
Log into the EZVIZ International App, scan the QR code, and then follow the
prompts to add the DVR to the EZVIZ account.
You can also access the DVR by operating the local menu. A start-up wizard will
pop up on the screen after the DVR starts, click the Start Wizard button, and follow
the wizard to set the DVR.
Connect the External Display and Mouse
3
Connect the monitor and DVR with the HDMI cable (included) if you want to
operate the system with the local menu. The DVR also supports VGA output (VGA
cable not included).
Connect the mouse to DVR via the USB port.
Connect the monitor and DVR with the HDMI cable (included) if you want to
operate the system with the local menu. The DVR also supports VGA output (VGA
cable not included).
Connect the mouse to DVR via the USB port.
Start Up the DVR
5Connect the DVR to the power socket with the power cable.
For the CS-X5-108T and CS-X5-116T only, turn on the power switch on the rear
panel to start the DVR.
ESPAÑOL
Conexión de las cámaras al DVR
1
POWER WAN LAN2 LAN4LAN1 LAN3 WPS/
RESET
VIDEO IN
AUDIO
IN
OUT
The figures in this manual are for reference only and may differ from the actual
product.
Las figuras de este manual solo se incluyen a modo de referencia y pueden no ser
idénticas al producto en cuestión.
1
2
VIDEO IN
AUDIO
IN
OUT
1
2
Find the red power connectors of the Power + Video Cable.
Connect one end of the red power connector to the camera’s power input, and
the other end to the Isolated Power Module.
Then use the 1-to-4 power cable if you have many cameras to connect
(Optional). Connect the Power + Video cable or 1-to-4 power cable to the
Camera Power Adapter.
Plug the camera power adapter into a power socket to power on the camera(s).
Power on the Camera(s)
2
1
2
3
1
2
4
1
2
3
4
1
2
VIDEO IN
AUDIO
IN
OUT
1
2
VIDEOIN
AUDIO
IN
OUT
......
Localice los conectores BNC amarillos del cable de alimentación + vídeo. Conecte
un extremo del conector BNC al conector BNC de la cámara y el otro extremo al
conector BNC del DVR.
VIDEOIN
AUDIO
IN
OUT
......
UD.6L0208B0027A01