Ezviz CSC3TN1H3 User manual

COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the
properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”).
This user manual (hereinafter referred to as “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the
prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make
any warranties, guarantees or representations, express or implied, regarding to the
Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons. Please find the latest
version in the ™ website (http://www.ezvizlife.com).
Revision Record
New release – January, 2021
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties of
EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the
properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED
“AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS,
OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG
OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF
THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL
EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE
PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR
PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE
TERMINATION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN
AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C)
FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT
LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS,
AND AMONG OTHERS.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE
ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND
DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT
LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO
ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL
NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE
PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE
LAW, THE LATTER PREVAILS.

1
Overview
1. Package Contents
Camera
Drilling Template Screw Kit
Power Adapter Regulatory Information Quick Start Guide
The power adapter's appearance is subject to the one you have bought.
2. Basics
Micro SD Card Slot
RESET Button
MIC
Fastener
Ethernet Port
Power Port

2
Lens
IR Light
LED Indicator
Name Description
RESET Button • When the camera is working, press and hold for about 4s until the
LED indicator is solid red, the camera will restart and all parameters
will be restored to default settings.
• If you want to connect the camera to a new Wi-Fi, press and hold for
about 4s, and then follow the instructions on the app to configure a
new Wi-Fi.
MIC Collects and converts sound into an electrical signal.
Speaker Converts an electrical audio signal into a corresponding sound.
Fastener Rotate to make angle adjusting easier.
IR Light Helps the camera to get black-and-white images at night.
LED Indicator • Solid Red: Camera starting up.
• Slow-flashing Red: Network exception.
• Fast-flashing Red: Camera exception (e.g. Micro SD card error).
• Fast-flashing Blue: Camera ready for Wi-Fi connection.
• Slow-flashing Blue: Camera running properly.
• Solid Blue: App visiting camera.
Cable and Network Connection
1. Wiring
Option A: Wired Connection
1. Connect the camera to the LAN port of your router with the Ethernet cable
(purchase separately).
2. Connect power port of the camea to the power outlet.
Power Adapter
Outlet
Router
Use power adapter and power cable come with the camera in the box.

3
Option B: Wireless Connection
Connect the camera to the power source with power adapter.
Power Adapter
Outlet
2. Connect to the Internet
1. Get the EZVIZ App
-Connect your mobile phone to Wi-Fi (suggested).
-Download and install the EZVIZ app by searching for “EZVIZ” in the App Store
or Google PlayTM.
-Launch the app and register an EZVIZ user account.
EZVIZ App
If you have already used the app, please make sure that it is the latest version. To find
out if an update is available, go to the app store and search for "EZVIZ".
2. Add Camera to EZVIZ
-Press and hold the RESET button on the camera for about 4 seconds. The
LEDindicatorwillfastashblue.
-Log in to your account using the EZVIZ app.
-On the Home screen, tap “+” on the upper-right corner to go to the Scan QR
Code interface.
-Scan the QR code on the Quick Start Guide cover or on the body of the camera.
-Follow the EZVIZ app wizard to add the camera to the app.
If you want to connect your camera to another Wi-Fi, press and hold the reset button
for about 4s and repeat the steps above.

4
Installation
1. SD Card Installation (Optional)
1. Remove the cover on the camera.
2. Insert the micro SD card (sold separately) into the card slot
3. Place the cover back on.
After installing the micro SD card, you should initialize the card in the EZVIZ app
before using it.
4. In the EZVIZ app, tap the Storage Status in the Device Settings interface to
check the SD card status.
5. If the memory card status displays as Uninitialized, tap to initialize it.
2. Installation Location
Choosealocationwithaclear,unblockedeldofviewandwithagoodwireless
signal to the camera. Please keep the following tips in mind:
• Make sure the wall is strong enough to withstand three times the weight of the
camera.
• Camera cannot be installed in front of an air conditioner or facing direct sunlight.
• Setting up detection sensitivity on EZVIZ app when selecting location, thus you
can verify if motion can be detected and adjust the value of sensitivity based on
the size and distance of detected objects.
3. Installation Procedure
-Stickthedrillingtemplateontoacleanandatsurface.
-(For cement wall only) Drill screw holes according to the template, and insert
anchors.
-Usescrewstoxthecameraontheinstallationsurface.
-Loosen the fastener.
-Rotate the upper part of the camera to get an appropriate detection effect.
Installation
Surface Drilling Template Camera
Fastener
Anchor Screw

5
Operations on the EZVIZ App
The app interface may be different due to version update, and the interface of the app you
installed on your phone shall prevail.
1. Live View
When you launch the EZVIZ app, the device page displays as shown below.
You can watch a live feed, take snapshots, record videos, or choose video
definition as needed.
C3TN
Icon Description
Share. Share your device with anyone you want.
Settings. View or change the device settings.
Video History. View Recordings.
Snapshot. Take a snapshot.
Record. Manually start/stop recording.
Active Defense. Sound the alarm to deter intruders.
Definition. Select video resolution from Ultra HD, Hi-Def or
Standard.
Multi-screen Live. Tap to select live view window layout.

6
2. Video History
The camera supports both local storage and cloud storage.
Tap Video History button on the device page, then you can use the calender and
timeline to find and view specific recordings.
3. Intelligent Human Detection
Go to Settings - Intelligent Human Detection and enable it. Then EZVIZ will send
you notifications when a trigger is detected.
To let the camera respond differently in different situations, you can customize
the detection notification by changing the value of detection sensitivity. The
higher sensitivity is, the easier people farther to the camera can be detected.
4. Active Defense
With intelligent human detection enabled, alarms will automatically be triggered
and videos will be recorded once human or animal is detected. Alarm stops until
no motion is detected.
In addition, you can also tap the Active Defense button on the device page to
trigger an alarm. The camera will sound an alarm and the spotlight will flash
quickly to deter intruders, which can last up to one minute.

7
FAQ
Q: If the camera is offline on the App, will the video recording continue?
A: If the camera is powered on but disconnected from the Internet, then local
recording will continue but cloud recording will stop. If the camera is powered
off, both video recordings will stop.
Q: Why the alarm is triggered when nobody in the image?
A: Configure a lower value for the detection sensitivity. Please notice that vehicle
and animals are also alarm triggering sources.
Q: How to use the micro SD card for local storage?
A: 1. Make sure that there is a micro SD card inserted and the camera is added
to your EZVIZ account. Open the EZVIZ app and enter the “Device Details”
interface, if the “Initialize Storage Card” button appears, you need to initialize
the micro SD card first.
2. The micro SD card recording for the motion detection is enabled by default.
Q: The mobile phone cannot receive alarm prompts when the camera is online.
A: 1. Make sure that the EZVIZ app is running on your mobile phone and that the
Motion Detection Notification is enabled.
2. For Android system, make sure that the app is running in background; and
for iOS, enable the message push function in “Settings > Notification”.
3. If still no alarm prompts, press and hold the RESET button for about 4
seconds to restore the camera settings.
Q: Live view or playback failed.
A: Make sure that your network is well connected. Watching live videos needs a
good bandwidth. You can refresh the video, or change a network and try again.

8
EZVIZ Connect
1. Use Amazon Alexa
These instructions will enable you to control your EZVIZ devices with Amazon
Alexa. If you run into any difficulties during the process, please refer to
Troubleshooting.
Before you start, make sure that:
1. EZVIZ devices are connected to the EZVIZ app.
2. In the EZVIZ app, turn off the "Image Encryption" in the Device Settings page.
3. You have an Alexa-enabled device (i.e Echo Spot, Echo-Show, All-new Echo-
Show, Fire TV (all generations), Fire TV stick (second generation only), or Fire
TV Edition smart TVs).
4. The Amazon Alexa app is already installed on your smart device, and you have
created an account.
To Control EZVIZ devices with Amazon Alexa:
1. Open the Alexa app and select "Skills and Games" from the menu.
2. OntheSkillsandGamesscreen,searchfor"EZVIZ",andyouwillnd"EZVIZ"
skills.
3. Select your EZVIZ device's skill, then tap ENABLE TO USE.
4. Enter your EZVIZ username and password, and tap Sign in.
5. Tap the Authorize button to authorize Alexa to access your EZVIZ account, so
that Alexa can control your EZVIZ devices.
6. You will see "EZVIZ has been successfully linked", then tap DISCOVER DEVICES
to allow Alexa to discover all your EZVIZ devices.
7. Go back to Alexa app menu and select "Devices", and under devices you will
see all your EZVIZ devices.
Voice Command
Discover a new smart device via the "Smart Home" menu in the Alexa app or the
Alexa Voice Control function.
Once the device is found, you can control it with your voice. Speak simple
commands to Alexa.
Your device's name for example: "show xxxx camera," can be changed in the EZVIZ app.
Each time you change the name of the device, you will need to discover the device again
to update the name.
Troubleshooting
What should I do if Alexa fails to discover my device?
Check if there are any Internet connecting problems.
Try to restart the smart device and re-discover the device on Alexa.
Whythedevice'sstatusis"Ofine"onAlexa?
Your device might have been disconnected from the network. Restart the smart
device and re-discover on Alexa.
Check if your router is connected to the Internet and try again.
For details about countries where Amazon Alexa is available, see Amazon Alexa's official
website.

9
2. Use Google Assistant
With the Google Assistant, you can activate your EZVIZ device and watch live
by speaking Google Assistant voice commands.
The following devices and apps are required:
1. A functional EZVIZ app.
2. In the EZVIZ app, turn off the "Image Encryption" and turn on the "Audio" in
the Device Settings page.
3. A TV with functional Chromecast connecting to it.
4. The Google Assistant app on your phone.
To get started, follow the steps below:
1. Set up the EZVIZ device and make sure it works properly on the app.
2. Download the Google Home app from the App Store or Google Play StoreTM
and log into your Google account.
3. On the Myhome screen, tap “+” on the upper-left corner, and select "Set up
device" from the menu list to go to the Set up interface.
4. Tap Works with Google,andsearchfor"EZVIZ",whereyouwillnd"EZVIZ"
skills.
5. Enter your EZVIZ username and password, and tap Sign in.
6. Tap the Authorize button to authorize Google to access your EZVIZ
account, so that Google can control your EZVIZ devices.
7. Tap Return to app.
8. Follow the above steps to complete the authorization. When synchronization
is completed, EZVIZ service will be listed under your list of services. To see
a list of compatible devices under your EZVIZ account, tap on the EZVIZ
service icon.
9. Now try some commands. Use the name of the camera that you created
when you set up the system.
Users can manage devices as a single entity or in a group. Adding devices
to a room allows users to control a group of devices at the same time using
one command.
See the link for more information:
https://support.google.com/googlehome/answer/7029485?co=GENIE.
Platform%3DAndroid&hl=en
For additional information about the device, please refer to www.ezviz.eu.

Regulatory Information
EC DECLARATION OF CONFORMITY
Hereby, Hangzhou EZVIZ Software Co., Ltd. declares that the radio equipment type [CS-C1C, CS-C1HC, CS-C1T, CS-C2C, CS-CV206,
CS-CV310, CS-C3N, CS-C3T, CS-C3TN, CS-C3HX, CS-C3W, CS-C3WN, CS-C3X, CS-C6N, CS-CV246, CS-CV248, CS-C6CN, CS-C6C,
CS-C6W, CS-TY1, CS-TY2, CS-TY3, CS-CV336, CS-DB1, CS-DB2, CS-DP1, CS-DP2, CS-DP1C, CS-DP2C, CS-DB2C, CS-CMT-CHIME,
CS-C4W, CS-C4C, CS-CV228, CS-C5W, CS-C5C, CS-C5HC, CS-C5X, CS-C5HX, CS-C8PF, CS-C8T, CS-C8TN, CS-C8W, CS-C8C, CS-CP1,
CS-C3A, CS-BC1, CS-BC1-B1, CS-BC1-B2, CS-BC1-B3, CS-BC1-B4, CS-BC1C, CS-BC2, CS-BC3, CS-BC3C, CS-BC8, CS-BC8C, CS-BM1,
CS-W2H, CS-X5S-4W, CS-X5S-8W, CS-A1-32W, C3-A3-W, CS-T1C-BG, CS-T2C-BG, CS-T3C-BG, CS-T9-A, CS-T4-A, CS-HAL-LB1] is in
compliance with Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at the following web link:
http://www.ezvizlife.com/declaration-of-conformity.
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore
with the applicable harmonized European standards listed under the Radio Equipment Directive 2014/53/EU,
the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal
waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase
of equivalent new equipment, or dispose of it at designated collection points. For more information see:
www.recyclethis.info
2006/66/EC and its amendment 2013/56/EU (battery directive): This product contains a battery that cannot
be disposed of as unsorted municipal waste in the European Union. See the product documentation for
specific battery information. The battery is marked with this symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info
Use only power supplies listed in the Table.
Equipment model Adapter manufacture Adapter model
CS-C1C/ CS-C1HC/ CS-C1T/
CS-C2C/ CS-CV206/
CS-CV246/CS-C6N/ CS-C6CN/
CS-C6C/ CS-TY1/ CS-TY2/
CS-TY3/ CS-W2D/ CS-A1-32W/
CS-T9-A/ CS-BC1C/
CS-CP1/CS-A3-W
Shenzhen Honor Electronic Co Ltd ADS-5RE-06 05050EPCU/EPC(US),
ADS-5RH-06 05050EPB(UK),
ADS-5RH-06 05050EPG(EU),
ADS-5RH-06 05050EPSA(AU),
ADS-5RH-06 05050EPBR(BR),
ADS-5RH-06 05050EPI(IN),
ADS-5MA-06A 05050GPK(KR)
Sichuan Jiuzhou Electronic Technology Co., Ltd DYS05100CP-U, DYS05100CP-E
Sichuan Jiuzhou Electronic Technology Co., Ltd DYS05200CQ-U, DYS05200CQ-E
CS-CV248/ CS-C6W/ CS-C6Wi/
CS-CV336/ CS-DP1/ CS-DP1C/
CS-DP2C/ CS-C3A/ CS-BC1/
CS-CP1/ CS-BC1C/ CS-BC3/
CS-BC3C/ CS-BC8/ CS-BC8C/
CS-BM1
Shenzhen Honor Electronic Co., Ltd ADS-10LA-06 05010EPCU/EPC(US),
ADS-10RH-06 05010EPB (UK),
ADS-10RH-06 05010EPG(EU),
ADS-10RH-06 05010EPSA(SA),
ADS-10RH-06 05010EPBR(BR),
ADS-10RH-06 05010EPI(IN),
ADS-12CG-06 05010EPC(JP)
CS-CV310/ CS-C3N/ CS-C3W/
CS-C3WN/ CS-C3X/ CS-SD1/
CS-C4W/ CS-C4C/ CS-CV228/
CS-C8W/ CS-C8C/ CS-W2H/
CS-W3C-WD1200G/CS-T8-B/
CS-C3T/ CS-C3TN/ CS-C3HX/
CS-C8PF/ CS-C8T/ CS-C8TN
Shenzhen Honor Electronic Co., Ltd ADS-12FG-12N 12012EPCU(US),
ADS-12FG-12N 12012EPB(UK),
ADS-12FG-12N 12012EPG(EU),
ADS-12FB-12 12012EPSA(AU),
ADS-12FG-12N 12012EPBR(BR),
ADS-12FG-12N 12012EPI(IN)
Moso Power Supply Technology Co.. Ltd MSA-C1500IC12.0-18P-GB(UK),
MSA-C1500IC12.0-18P-DE,
MSA-C1500IC12.0-18P-AU(AU),
MSA-C1500IC12.0-18P-BR(BR),
ADS-25FSG-12 12018GPI(IN)
CS-X5S-4W/ CS-X5S-8W/
CS-X5S-16H
Important Safety Information
Note: Please read the manual before using the device.
Caution: Do not block ventilation openings while the system is on, and keep at least 2 cm distance from ventilation
openings and walls or other things which may block the openings.
Warning: Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery that can result in an
explosion.
Warning: Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or
the leakage of flammable liquid or gas.
Warning: A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable
liquid or gas.
Warning: Dispose of used batteries according to the instructions.
Warning: Replace only with the same or equivalent type recommended by the manufacturer.
Caution: THE PRODUCT IS BUILT IN A REPLACEABLE BATTERY.
Warning: Do not ingest battery, Chemical Burn Hazard.
Caution: This product contains a coin/button cell battery. If the coin / button cell battery is swallowed, it can cause severe
internal burns in just 2 hours and can lead to death.
Caution: Keep new and used batteries away from children.
Caution: If the battery compartment does not close securely, stop using the product and keep it away from children.
Caution: If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical
attention.
Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.
This symbol on the device indicates that the safety compatibility manual and / or installation manual must be read, which
contains information related to the safe operation of the device.
Caution: Be sure to read these instructions before operating the equipment.
Warning: The separate earthing terminal must be permanently connected to earth.
Warning: For SELV DC input: the DC power source shall comply with the Safety Extra-Low Voltage (SELV) requirements
of IEC 60950-1.
This symbol on the device indicates that the surface or component is overheating. If you touch this surface, you may
cause personal injury.
Warning: To reduce the risk of personal injury due to overheating of the components, wait until the surface cools down
before touching it.

FCC Information
Please take attention that changes or modification not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
FCC compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada.
Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type
d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communication satisfaisante.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.
IFETEL Information
La operación de este equipo está sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia perjudicialy
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no
deseada.
102026549，E