Ezviz CS-CV206 User manual

Scan the QR code with the EZVIZ App
to add the device to your account.
Please keep it for further reference.

COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd.. ALL RIGHTS
RESERVED.
Any and all information, including, among others, wordings, pictures,
graphs are the properties of Hangzhou EZVIZ Software Co., Ltd.
(hereinafter referred to as “EZVIZ”). This user manual (hereinafter
referred to as “the Manual”) cannot be reproduced, changed, translated,
or distributed, partially or wholly, by any means, without the prior written
permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make
any warranties, guarantees or representations, express or implied,
regarding to the Manual.
About this Manual
The Manual includes instructions for using and managing the product.
Pictures, charts, images and all other information hereinafter are for
description and explanation only. The information contained in the
Manual is subject to change, without notice, due to rmware updates
or other reasons. Please nd the latest version in the ™ website
(http://www.ezvizlife.com).
Revision Record
New release – January, 2019
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the
properties of EZVIZ in various jurisdictions. Other trademarks and logos
mentioned below are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND
EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,
FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF
THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,
AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION,
IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF EZVIZ

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO
EVENT SHALL EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED
THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY
OR PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION
OR SERVICE TERMINATION CAUSED BY: A) IMPROPER INSTALLATION
OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF
NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF
OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY
THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG
OTHERS. REGARDING TO THE PRODUCT WITH INTERNET ACCESS,
THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.
EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING
FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR
OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.SURVEILLANCE LAWS
AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE
CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING
THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
TO THE APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE
EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE
APPLICABLE LAW, THE LATTER PREVAILS.
Regulatory Information
FCC Information
This Camera complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This Camera may not cause harmful interference, and
(2) This Camera must accept any interference received, including
interference that may cause undesired operation.
Note: This product has been tested and found to comply with the
limits for a Class B digital Camera, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This product

generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this product does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Please take attention that changes or modification not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This equipment should be installed and operated with a minimum
distance 20cm between the radiator and your body.
This Camera complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this Camera may not cause interference, and
(2) this Camera must accept any interference, including interference
that may cause undesired operation of the Camera.
Under Industry Canada regulations, this radio transmitter may only
operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is
not more than that necessary for successful communication.
EU Conformity Statement
This product and - if applicable - the supplied accessories
too are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under the
Radio Equipment Directive 2014/53/EU, the EMC Directive
2014/30/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this
symbol cannot be disposed of as unsorted municipal
waste in the European Union. For proper recycling, return
this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated
collection points. For more information see: www.
recyclethis.info.
2006/66/EC (battery directive): This product contains
a battery that cannot be disposed of as unsorted
municipal waste in the European Union. See the product
documentation for specic battery information. The battery
is marked with this symbol, which may include lettering
to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to your supplier or to
a designated collection point. For more information see:
www.recyclethis.info.
EC DECLARATION OF CONFORMITY
Hereby, Hangzhou EZVIZ Software Co., Ltd . declares that the radio
equipment type [CS-CV206] is in compliance with Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at
the following web link:
http://www.ezvizlife.com/declaration-of-conformity.
Safety Instruction
Due to the product shape and dimension, the name and address of the
importer/manufacturer are printed on the package.
Customer Service
For more information, please visit www.ezvizlife.com.
Need help? Please visit “www.ezvizlife.com/inter/page/contact-us” for
our local contact details.
SAVE THIS MANUAL FOR FUTURE REFERENCE

1
Setup
Step 1 Power-on
Plug the power cable into the camera and to the power adapter
and then into a power outlet, as shown in the gure below.
Power Cable
Power Outlet
Step 2 Camera Setup
1.Create a user account
-Connect your mobile phone to Wi-Fi using your 2.4GHz
network.
-Download and install the EZVIZ app by searching “EZVIZ”
in App Store and Google PlayTM.
-Launch the app and register for an EZVIZ user account
following the start-up wizard.
2.Add a camera to EZVIZ
-Log in the EZVIZ app.
-From the EZVIZ app Home screen, tap “+” on the upper-right
hand corner to go to the scan QR code interface.

2
-Scan the QR Code on the bottom of the camera.
Bottom of the
Camera
-Follow the EZVIZ app wizard to nish Wi-Fi conguration.
Please make sure your phone is connected to the 2.4GHz
Wi-Fi from the router for Wi-Fi conguration.
3.Change the default password (Optional)
After adding the camera, you are required to change
the device password to ensure your video security. The
password is used for the Image Encryption. If you turn
on the Image Encryption, you are required to input your
password when you live view or play back the camera.
-Go to the camera settings screen to change the default
password.
-Tap on “Change Password”.
-Tap on “Edit”.
-Enter the original verication code located on the bottom
of the camera.
-Enter the new password. Please use letters and numbers
between 6 to 12 characters.

3
Installation
Step 1 Install the Metal Plate (Optional)
Pick a clean and at surface and secure the metal plate
to the desired position with the foam stickers or screws
(not included).
There’s a magnet piece inside the camera. You can skip
this step if the surface is made of metal.
Step 2 Install the Camera
Secure the camera magnetically to the metal plate or metal
surface (see gure below).
Metal Plate
Foam Sticker
Step 3 Complete Installation
Adjust the camera angle as required.

4
Appendix
Basics
Speaker
Power Input
microSD Card Slot
RESET
Magnetic Base
Lens
Microphone
LED Indicator
IR Light
Name Description
Speaker Two-way talk.
Power Input 5V±10%
micro SD Card For micro SD card (not included with this product). You
can purchase separately. Recommended compatibility:
Class 10, maximum space 256GB. After inserting the
card, you can record the event inside the camera.
RESET Hold down the RESET button for 5 seconds while
the camera is running, the camera restarts and all
parameters are reset to default.

5
Name Description
LED Indicator • Solid Red: Camera is starting up.
• Slow-Flashing Red: Wi-Fi connection has failed.
• Fast-Flashing Red: Device exception (e.g. MicroSD
card error).
• Solid Blue: Video is being viewed or played back in
EZVIZ App.
• Fast-Flashing Blue: Camera is ready for the Wi-Fi
connection.
• Slow-Flashing Blue: Camera is running properly.
IR Light Auto light source for dark environment. The camera
video has two modes: color (for daylight recording) and
black and white with IR illuminator (for night condition).
Box Contents
Camera (x1) USB Cable (x1) Power Adapter (x1)
Foam Sticker (X2)
Metal Plate (x1)
(3.5mm Hole Diameter) Quick Start Guide (x1)

6
Install Memory Card
Insert a micro SD card into the slot until a click.
Initialize Memory Card
1.In the EZVIZ app, check the memory card status by tapping
on the Storage Status in the Device Settings interface.
2.If the memory card status displays as Uninitialized, tap to
initialize it. The status will then change to Normal. You can
then start recording any event triggered video in the camera
such as motion detection.

7
Troubleshooting
Q: “The device is oine.” or “The device is not registered.” prompts
appear when adding the camera using the EZVIZ App.
A: 1.Make sure the network, which the camera is connected to, is
working properly and the router’s DHCP is enabled.
2.Hold down the RESET button for 5s to reset the settings if you
change the network parameters.
Q: The mobile phone cannot receive alarm prompts when the
camera is online.
A: 1.Make sure the EZVIZ app is running on your mobile phone.
2.For Android OS mobile phone, make sure the app is running
in the background; and for iOS mobile phones, enable the
message push function in “Settings > Notication”.
Q: Does the camera support power via USB devices or a portable
battery?
A: It’s advised to use the EZVIZ standard power adapter to provide a
stable voltage supply.
For detailed information, please visit www.ezvizlife.com.

8
설정
1단계 전원 켜기
아래 그림과 같이 전원 케이블을 카메라와 전원 어댑터에 연결한 후
전원 콘센트에 꽂습니다 .
전원 케이블
전원 콘센트
2단계 카메라 설정
1.사용자 계정 생성
- 2.4GHz 네트워크를 사용해 모바일 폰을 Wi-Fi 에연결합니다 .
- App Store 또는 Google PlayTM 에서 “EZVIZ”를 검색하여 EZVIZ 앱
을다운로드한 다음 설치합니다 .
- 앱을 실행하여 다음의 시작 마법사에 따라 EZVIZ 사용자 계정을 등록
합니다 .
2.EZVIZ 에카메라를 추가합니다 .
- EZVIZ 앱에 로그인합니다 .
- EZVIZ 앱홈화면의 오른쪽 구석 상단에 있는 “+”를 눌러 QR 코
드스캔 인터페이스로 이동하십시오 .

9
- 카메라 바닥에 있는 QR 코드를 스캔합니다 .
카메라 바닥
- EZVIZ 앱마법사를 따라 Wi-Fi 구성을 완료하십시오 .
Wi-Fi 를구성하기 위해 휴대전화가 라우터의 2.4GHz Wi-Fi 에
연결되어 있는지 확인해 주십시오 .
3.기본 비밀번호 변경 (선택 사항 )
카메라를 추가한 후비디오 보안을 위해 장비 비밀번호를 변경
해야 합니다 . 해당 비밀번호는 이미지를 암호화할 때사용합니
다. 이미지 암호화를 사용하도록 설정하면 실시간 보기를 실행
하거나 카메라를 재생할 때비밀번호를 입력해야 합니다 .
- 카메라 설정 화면으로 이동해 기본 비밀번호를 변경하십시오 .
- “Change Password( 비밀번호 변경 )”을 탭합니다 .
- “Edit( 편집 )”을 탭합니다 .
- 카메라 하단에 부착된 기본 인증 코드를 입력합니다 .
- 신규 비밀번호를 입력합니다 . 6~12 자의 문자와 숫자를 사용
하십시오 .
이기기는 가정용으로 전자파적합등록을 한기기로서 주거지
역은 물론 모든 지역에서 사용할 수있습니다 . 위와 같은 무선
설비는 전파혼선의 가능성이 있으므로 인명안전과 관련된 서
비스는 할수없습니다 .

10
설치
1단계 금속판 설치 (선택 사항 )
깨끗하고 평평한 표면을 선택한 다음 발포 스티커 또는 나사 (미포
함)를사용해 금속판을 원하는 위치에 고정합니다 .
카메라에 자석이 내장되어 있습니다 . 표면이 금속성일 경우 이
단계를 생략할 수있습니다 .
2단계 카메라 설치
카메라를 금속판 또는 금속 표면에 자기로 고정합니다 (아래 그림
참조 ).
금속판
발포 스티커
3단계 설치 마무리
필요에 따라 카메라 각도를 조정합니다 .

11
부록
기본 사항
스피커
전원 입력
microSD 카드 슬롯
초기화 버튼
마그네틱 베이스
렌즈
마이크
LED 표시등
IR 조명
명칭 설명
스피커 양방향 대화에 사용 .
전원 입력 5V ±10%
micro SD 카드 microSD 카드용 (이제품에 포함되지 않음 ). 카드는 별도로
구매할 수있습니다 . 권장되는 호환성 : 클래스 10, 최대 공
간256GB. 카드를 삽입한 다음 카메라 내부에 이벤트를 녹
화할 수있습니다 .
초기화 버튼 카메라가 작동 중일 때초기화 버튼을 5 초동안 누릅니다 .
그러면 카메라가 다시 시작되고 모든 매개변수가 기본값으
로초기화됩니다 .

12
명칭 설명
LED 표시등 • 빨간색 켜짐 : 카메라가 시작 중입니다 .
• 빨간색으로 느리게 깜박임 : Wi-Fi 연결에
실패했습니다 .
• 빨간색으로 빠르게 깜박임 : 장비 비정상 (예: MicroSD
카드 오류 ).
• 파란색 켜짐 : EZVIZ 앱에서 비디오를 보고 있거나 재생 중입
니다 .
• 파란색으로 빠르게 깜박임 : 카메라에 Wi-Fi 를연결할 준
비가 되었습니다 .
• 파란색으로 천천히 깜박임 : 카메라가 올바르게 작동 중입
니다 .
IR 조명 어두운 환경을 위한 자동 광원 . 이비디오 카메라는 두가지
모드가 있습니다 . 하나는 컬러 모드 (주간 녹화용 )이며 다
른하나는 적외선 투광기를 사용하는 흑백 모드 (야간용 )입
니다 .
박스 내용물
카메라 1 개0 USB 케이블 1 개 전원 어댑터 1 개
발포 스티커 2 개
금속판 1 개
(구멍 직경 3.5mm) 빠른 시작 가이드 1 권

13
메모리 카드 설치
딸깍 소리가 날때까지 microSD 카드를 슬롯에 삽입하십시오 .
메모리 카드 초기화
1.EZVIZ 앱에서 Device Settings( 장비 설정) 인터페이스의
Storage Status( 저장소 상태 )를탭하여 메모리 카드 상태를 확
인합니다 .
2.메모리 카드 상태가 Uninitialized( 초기화되지 않음 )로표시되면
탭하여 초기화합니다 . 그러면 상태가 Normal( 정상 )으로 변경
됩니다 . 이제 카메라에 동작 탐지와 같이 어떠한 이벤트가 발생할
때비디오를 녹화할 수있습니다 .

14
고장 해결
질문 :EZVIZ 앱으로 카메라를 추가할 때“The device is oine.
(장비가 오프라인 상태입니다.)" 또는“The device is not
registered.( 장비가 등록되지 않았습니다 .)" 라는 메시지가 표시됩
니다 .
답변 :1.카메라가 연결된 네트워크가 제대로 작동하고 있으며 라우터의
DHCP 가활성화되어 있는지 확인합니다 .
2.네트워크 매개변수를 변경한 경우 설정을 초기화하려면 초기화
버튼을 5 초동안 누릅니다 .
질문 :카메라가 온라인 상태이지만 모바일 폰이 경보 메시지를 수신할 수
없습니다 .
답변 :1.모바일 폰에서 EZVIZ 앱이 실행되고 있는지 확인합니다 .
2.Android OS 모바일 폰의 경우 앱이 백그라운드로 실행 중
인지 확인합니다. iOS 폰의 경우에는 “Settings( 설정) >
Notication( 알림 )”에서 메시지 푸시 기능을 활성화합니다 .
질문 :USB 장치 또는 휴대용 배터리를 사용해 카메라에 전원을 공급할 수
있습니까 ?
답변 :안정적인 전원 공급을 위해 EZVIZ 표준 전원 어댑터를 사용하는 것
이좋습니다 .
자세한 정보를 알아보시려면 www.ezvizlife.com 을방문해 주십시오 .