FAB GLASS AND MIRROR CTW-FAB3000 User manual

FAB GLASS
AND MIRROR
Fab Glass Oval Shape Coffee Table
Installation Manual
SKU: CTW-FAB3000 / CTR-FAB30000 / CTB-FAB3000
www.fabglassandmirror.com Call: [phone] Fax: [phone]
Office Timing: 8:30 - 18:00 EST [email protected]

Thank you for your purchase! It is our desire to make your entire experience from
purchase to installation as easy as possible. We ask that you read each step of this
installation manual thoroughly to ensure proper installation of your new Oval Shape
Coffee Table. Our installation techniques are very important. Installing your table in any
manner other than the steps outlined in this manual may lead to structural failure of
your table.
It is your responsibility to see that your Glass Table is properly assembled, installed, and
cared for. Failure to follow instructions in this manual could result in serious injury. Use
this product with Glass cautions.
HARDWARE INCLUDED PER YOUR ORDER
CAUTION
Nut
( Qty - 2)
Screw Rod
( Qty - 2)
Tighten Key
( Qty - 1)
Metal Washer ( Qty - 2)
Rubber Washer
( Qty - 1)

1
2
3
4
By using your cutting tool,
carefully open the
package and remove
the table and hardware.
Now Place Packing Sheet
on the Floor and Drop the
Table Top on the sheet.
Use the rubber washer
before inserting the
table top base.
1
Page
www.fabglassandmirror.com
+ 1 888-474-2221
Fragile Handle with care
FRAGILE
GLASS
FAB GLASS
AND MIRROR
Rubber Washer
Take the big screw rods
on the center of the table
top hole and tight with
hands.
Screw Rod

5
6
7
Put the table base on
screw roads, Now put
metal washer and nuts
on screw roads.
Finally tight the nuts
with hands.
Now put the table in
right direction and
tight nuts by using the
tighten key.
Congratulations!
You have successfully installed
your New Oval Shape Coffee Table
2
Page
Nuts
Metal Washer
Tighten Key