FabiaTech Fanless Series User manual
Copyright
Copyright © 2019 FabiaTech Corporation, The content of this publication may not
be reproduced in any part or as a whole, transcribed, stored in a retrieval system,
translated into any language, or transcribed in any form or by any means,
electronic, mechanical, and magnetic… or otherwise without the prior written
permission of FabiaTech Corporation.
Disclaimer
FabiaTech makes no representation of warranties with respect to the contents of
this publication. In an effort to continuously improve the product and add features,
FabiaTech reserves the right to revise the publication or change specifications
contained in it from time to time without prior notice of any kind from time to time.
FabiaTech shall not be reliable for technical or editorial errors or omissions, which
may occur in this document. FabiaTech shall not be reliable for any indirect,
special, incidental or consequential damages resulting from the furnishing,
performance, or use of this document.
Trademarks
Trademarks, brand names and products names mentioned in this publication are
used for identification purpose only and are the properties of their respective
owners.
Technical Support
If you have problems or difficulties in using the system or setting up the relevant
devices, BIOS and software that are not explained in this manual, please contact
our service engineer for service, or send email to support@fabiatech.com.
Returning Your Board for Service & Technical Support
If your board requires servicing, contact the dealer from whom you purchased the
product for service information. You can help assure efficient servicing of your
product by following these guidelines:
A list of your name, address, telephone, facsimile number, or email address
where you may be reached during the day
Description of you peripheral attachments
Description of your software (operating system, version, application
software, etc.) and BIOS configuration
Description of the symptoms (Extract wording any message)
For updated BIOS, drivers, manuals, or product information, please visit us at
www.fabiatech.com.
ii
Table of Contents
FX5409 User’s Manual ...........................................................................................................i
Chapter 1 Introducing the FX5409 System ............................................................................... 1
Overview..................................................................................................................................1
Series Comparison Table.......................................................................................................2
Layout.......................................................................................................................................3
Specifications..........................................................................................................................4
Packing List..............................................................................................................................5
Chapter 2 Hardware Installation ............................................................................................... 7
Before Installation...................................................................................................................7
To install hardware- remove the bottom Cover............................................8
LED Indicators....................................................................................................14
I/O Peripheral Connectors ..............................................................................14
Connecting the DC Power and Power Button ............................................17
Jumper Setting ..................................................................................................18
Chapter 3 BIOS Setup............................................................................................................... 19
Overview................................................................................................................................19
BIOS Functions ...................................................................................................20
Keyboard Convention.....................................................................................21
Main Setup ............................................................................................................................22
Advanced Setup..................................................................................................................23
Trusted Computing...........................................................................................24
ACPI settings......................................................................................................25
IT8786 Super IO Configuration.........................................................................26
Hardware Monitor.............................................................................................29
Serial Port Console Redirection ......................................................................30
CPU Configuration............................................................................................36
Network Stack Configuration..........................................................................41
CSM Configuration...........................................................................................43
USB Configuration.............................................................................................45
Chipset...................................................................................................................................48
North Bridge.......................................................................................................49
iii
South Bridge.......................................................................................................50
Uncore Configuration ......................................................................................51
South Cluster Configuration............................................................................53
Security...................................................................................................................................59
Boot ........................................................................................................................................61
Save & Exit.............................................................................................................................63
Chapter 4 Software Installation ............................................................................................... 65
System Driver.........................................................................................................................65
Windows 10 X64- System Driver................................................................................65
ISH_BUS Driver........................................................................................................................66
WIN10 X64 Driver ........................................................................................................66
TXE Driver................................................................................................................................66
WIN10 X64 Driver ........................................................................................................66
LAN Driver (Intel I225-V).......................................................................................................66
WIN10 X64 Driver ........................................................................................................66
VGA Driver.............................................................................................................................67
WIN 10 x64 Driver........................................................................................................67
Audio Driver...........................................................................................................................67
WIN 10 X64 Driver.......................................................................................................67
EFI BIOS Flash Utility...............................................................................................................68
Watchdog Timer...................................................................................................................69
Watchdog Timer Setting...........................................................................................70
Watchdog Timer Enabled ...............................................................................71
Watchdog Timer Trigger ..................................................................................71
Watchdog Timer Disabled...............................................................................71
Digital I/O (GPIO) programming........................................................................................72
Chapter 5 Technical Reference .............................................................................................. 73
Technical Reference............................................................................................................73
Physical and Environmental.....................................................................................73
Serial Ports..........................................................................................................74
Appendix................................................................................................................................... 78
Dimension..............................................................................................................................78
iv
v
FabiaTech Corporation
Chapter1IntroducingtheFX5409System
Overview
The FX5409 is an embedded system with Intel® Celeron® J3455 Processor low-
power CPU module inside. This user’s manual provides information on the physical
features, installation, and BIOS setup of the FX5409.
Built to unleash the total potential of the Intel® Celeron® J3455 Processor, Able to
support 1.5 GHz CPU, this unit supports two LAN port, one PCIe mini card socket,
audio, GPIO, one USB-2.0, five USB-2.0/3.0 ports, SATA/m-SATA socket, Two So-
DIMM socket supports up to 8GB DDR3L RAM, VGA and HD port display.
Each FX5409 has four ports for I/O communications. Two RS232/RS422/RS485 port
and two RS232 ports is available.
The FX5409 is perfect for ATM machines, KIOSK, point-of-sales/point-of- information,
gaming and infotainment, measurement technology, lotteries, and banking and
small Embedded Control. The unit is only 200 mm (W) X130 mm (D) X52 mm (H).
1
FabiaTech Corporation
SeriesComparisonTable
Model FX5409
System Processor Intel® Celeron® CPU
J3455 1.5GHz
Cores / Threads 4 / 4
Code Name Apollo lake
Burst Frequency 2.3GHz
Memory
204 Pin-DIMM*2 DDR3L-1866
4GB / 8GB (Max.)
Audio
Front: Ear-Phone And MIC-In
Display VGA & HD
Multi I/O Two RS232/RS422/RS485 &
Two RS232
USB 2.0 / 3.0 One / Five
GPIO 4-In / 4-Out
RJ45 LAN port
(10/100/1000/2500 Mbps)
Two
Intel i225-V*
PCIe Mini Card Socket One
SIM Card Socket One
One PCIE Mini Card Socket for
m-SATA
Storage
One 2.5’ SATA HDD Connector
Watchdog Timer Yes
Operating Temperature
-20℃~+ 55℃(-4~131℉)**
-20℃~+ 60℃(-4~140℉)***
Dimensions (Unit: mm) 200 (W) X130 (D) X52 (H)
Note:* LAN port up to 2500 Base-T only for version 2.0 and later.
** LAN up to 2.5G (2500 Base-T): -20℃~+55℃,
***LAN up to 1.0G (1000 Base-T): -20℃~+60℃
2
FabiaTech Corporation
Specifications
Processor Board –
Intel ® Celeron ® (Apollo lake) CPU J3455 1.5GHz (2M Cache) Low Power
Processor with 4GB DDR3L/1866 -RAM
I/O Outlets –
Two 10/100/1000/2500 Base-T Ethernet LAN port with RJ45
One VGA and one HD display port
Audio connectors for Microphone-in, and Ear-Phone
One USB 2.0 and five USB 3.0 ports
One terminal block for 4-In and 4-Out Isolated Digital I/Os
Two RS-232/RS422/RS485 port and two RS232 ports with DB9
One PCIe Mini card socket modules, especially for WLAN/GPRS module
One terminal block for DC-In and one power button
LED Indicator –
One power LED with power button, and one hard disk access LED
Storage Bay-
One m- SATA socket for Flash modules
One SATA 2.5" hard disk space
Power requirement –
DC-IN: 12 V~24V, +12V DC 3.7A Maximum (1.85A typical).
Dimensions -
200mm (W) X130mm (D) X52mm
4
FabiaTech Corporation
PackingList
Upon receiving the package, verify the following things. Should any of the
mentioned happens, contact us for immediate service.
•Unpack and inspect the FX5409 package for possible damage that may
occur during the delivery process.
•Verify the accessories in the package according to the packing list and see
if there is anything missing or incorrect package is included.
•If the cable(s) you use to install the FX5409 is not supplied from us, please
make sure the specification of the cable(s) is compatible with the FX5409
system.
Note: After you install the FX5409, it is recommended that you keep the DVD that
contains drivers and document files, and keep the document copies, or
unused cables in the carton for future use.
The following lists the accessories that may be included in your FX5409 package.
Some accessories are optional items that are only shipped upon order.
•One FX5409 embedded system.
•One pack of 2 apartable terminal blocks, 2-pin for Power input and 10-pin
for GPIO.
•One Pack of (4+4) screws for 2.5” SATA hard disk installation and mini-card
•One compact disc includes software utility and manual.
Optional:
•AK1006- Half size mini PCIe module adapter kits. (PN: 0606010028G)
•FX5407K1 Wall mounting fixers and 4 screws. (P/N: 0606010036R)
•FX5504k1 Panel Mounting fixers and 2 screws. (VESA 75*75 /100 *100).
(PN:0606010012G)
•FX5403K1 1U Rack Mounting fixers and 4 screws.(PN: 0606010011G)
•AK1010 – Din Rail Mount kit (PN: 0606010046G)
5
FabiaTech Corporation
6
FabiaTech Corporation
Chapter2HardwareInstallation
This chapter introduces the system connectors & jumper settings, and guides you to
apply them for field application.
BeforeInstallation
Before you install the system, make sure you follow the following descriptions.
1. Before removing the cover, shut down the operation System and disconnect
power cord and (or) unplug DC-In cable.
2. Install any connector, m-PCIE module, and hard disk is sure that the power is
disconnected to off the system. If not, this may damage the system.
3. The ESD (Electricity Static Discharge) may be created from human body that
touches the board. It may do damage to the board circuit.
7
FabiaTech Corporation
8
To install hardware- remove the bottom Cover
If you are installing following hardware items, you can remove the bottom cover.
The following figure will guide you how to install SATA 2.5" HDD, mini PCIe WLAN or
GPRS module, DDR3L RAM module to the FX5409 and how to install the FX5409
fixers. (Please see the spots circled.)
a. Unscrew bottom cover
Use a cross-head screwdriver to remove seven screws that secure the bottom
cover.
M3*P0.5
b. Installing Memory: So-DIMM Socket for DDR3L RAM Modules
If you may extend additional memory to system, see as following figure. The So-
DIMM socket supports 2GB to 4GB (Max. 8GB) of DDR3L RAM modules. Installing
memory module to DIMM1 socket, when only one memory module. We
recommend that installing dual channel (DIMM1 & DIMM2) RAM module made by
the same part number and manufacturer.
M2*P0.4
FabiaTech Corporation
9
c. Installing hard disk: SATA Hard disk or SSD
Fasten screws up the Hard disk device to bottom inside HDD metal frame and
connect the SATA HDD cable and power cable. See as following figure and rear
pictures.
c1. Fasten screw the SATA HDD
M3*P0.5
c2. Installing SATA Cable
CN11
J4
CN10
Note: Use caution when handling the hard disk to prevent damage to SATA
connector as you inserted hard disk. Be careful with the orientation when
installing connectors. The CN10 SATA connector used to connect a SATA 2.5"
HDD with included SATA cable, CN11 is for SATA power connector. (The
CN11 support +5V Voltage only)
FabiaTech Corporation
d. Installing m-SATA Module
FX5409 supports m- SATA module; you may extend additional m- SATA module to
system.
M2*P0.4
e. Installing PCIe Mini Card Module
FX5409 supports PCIe mini card socket; you may extend additional PCIe mini card
module and SIM card to system. Connect to the antenna cable from rear and front
side antenna holes to GPRS or Wireless LAN module and install the SIM card for
GPRS. See following figures.
e1. Installing PCIe Mini Card and SIM card
M2*P0.4
10
FabiaTech Corporation
e2. Installing AK1006 kit (Optional): For Half Size Mini PCIe module
Note: 1. When installing PCIe GPRS Mini card on FX5409 system these is need
the installing the SIM Card to SIM socket (Front side) of system.
2. The insert SIM card into the SIM card socket. Make sure that the SIM card
is properly inserted and that golden contact area on the card is facing
downwards.
11
FabiaTech Corporation
f4. FX5403K1 – Rack mounting Kit
M3*P0.5
13
FabiaTech Corporation
14
LED Indicators
The Power and HDD LED’s has two distinctive statuses: Off for inactive operation
and blinking light for activity.
RESET
12~40V
DC
+10
-23
DI
102
DO
3
ANTENNA
EAR-PHONEPOWER BUTTON DIGITAL IO
ANTENNA
MIC
HDD USB
I/O Peripheral Connectors
View from the rear and front side, if you are connecting the monitor, LAN, COM,
Audio, USB, GPIO, VGA and HD to the FX5409. See following figure and a side
pictures.
COM1
ANTENNA COM2
COM3
COM4 LAN1 LAN2
USBDC IN VGA
21
31
-2
+4
10101 21
DISPLAY
DC12~24V
1. Connecting the Display: VGA and HD port
VGA HD
FabiaTech Corporation
15
2. Connecting the COM port
The DB9 COM3~COM4 is standard RS232 serials port, and the COM1 and COM2 is
designed for multiple proposes. The COM1/COM2 can select RS232/RS422/RS485
by BIOS CMOS setting. The following tables show the signal connections of these
connectors.
3. Connecting the LAN ports
The RJ45 connector with 2 LED’s for WAN/LAN. The right side LED (lights up in
orange or green) indicates data is being accessed and the left side LED (green)
indicates on-line status. (On indicates on-line and off indicates off-line)The following
lists the pin assignment and LED’s status of RJ45.
4. Connecting the USB Ports
The system supports a six port USB connector. Any USB device can be attached to
USB ports as plug-and-play function is supported. The rear panel of USB #1~4 can
support USB3.0, and front panel USB #5 support USB 3.0,USB #6 support USB 2.0.
DB-9
RS-232 RS-422
RS-485
1 -DCD TX- 485-
6 -DSR
2 RXD TX+ 485+
7 -RTS
3 -TXD RX+
8 -CTS
4 -DTR RX-
9 -RI
5 Ground
Metal
Case Ground
RJ45 LAN RJ45 LAN
1 MDI0+ 5 MDI2+
2 MDI0- 6 MDI2-
3 MDI1+ 7 MDI3+
4 MDI1- 8 MDI3-
R_LED
Data Rate L_LED Link Status
Off 10M
Orange
100M/1000M
Green
2500M
Green
Active
USB Signal
1 USBV
2 USBD- (V2.0)
3 USBD+(V2.0)
4 USBG
5 StdA_SSRX-(V3.0)
6 StdA_SSRX+(V3.0)
7 USBG (V3.0)
8 StdA_SSTX-(V3.0)
9 StdA_SSTX+(V3.0)
8 1
(Front View)
(Front View)
1
4
59
1
4
USB 3.0
USB 2.0
Other manuals for Fanless Series
8
This manual suits for next models
1
Table of contents
