FableKids NOBLE Product information sheet

Child Car Seat
Please read the instructions carefully before use and keep for future reference.
Thank you for choosing Fable Kids.
NOBLE
Original User Manual –FableKids Child Car Seat

1. Product Overview
2. Important Safety Information
3. How to Use the Product
4. Installation
5. Removal Fabric Cover and Assembly
6. Maintenance and Care
7. Environmentally Friendly Disposal
Table of Contents
1
2
4
12
18
20
21
Original User Manual –FableKids Child Car Seat

Dear Parents,
Thank you for purchasing our product. Please read the operating
instructions carefully before using the product for the first time. If you
give the product to a third party, this manual must be handed over
with it. Keep the instruction manual for future reference. The
drawings in this manual may not match the physical objects. Please
refer to the physical objects.
1. Product Overview
1
1. Headrest
2. Belt Guide Hook Canopy Guide
3. Fabric Cover
4. Shoulder Pad
5. Cushion
6. Buckle
7. Crotch Pad
8. Adjusting Device
9. Harness Adjustment Strap
10. Headrest Handle
11. Harness
12. Backrest Reclining Handle
13. Backrest Rotating Handle
14. Base
15. Backrest Hanger
16. Top Tether
17. Backrest
18. ISOFIX Button
19. ISOFIX Connector
20. Canopy
21. Side Protection
13 14
1
11
12
5
4
3
2
8
7
9
6
10
20
15
16
21
17
19
18
Original User Manual –FableKids Child Car Seat

•Read this instruction manual carefully.
•The correct fitting of the 3-point belt or the ISOFIX anchoring systems is
of vital importance for the safety of your child.
•For the future use of the seat, you must keep the instruction manual.
There is a pocket on the side of the base where the instruction can be
kept.
•Never leave your child unattended in the car.
•Do not use a child safety seat if the vehicle seat is equipped with front
airbags. This can be dangerous. This does not apply to so-called side
airbags.
•Before using our product, please read the instruction carefully, the product is a
safety product and is only safe when used according to the instruction manual.
•This is a ”Universal” and “SemiUniversal” child restraint, it is approved to
regulation No. 44/04 series of amendments, for general use in vehicles and it
will fit most, but not all, car seats.
•A correct fit is likely if the vehicle manufacturer has declared in the vehicle
handbook that the vehicle is capable of holding a ”Universal”
•child restraint for this age group.
•The product has been approved according to the strictest European safety
standards (ECE R44/04) and is suitable for Group 0+(0-13kg),Group I (9-18kg),
Group II (15-25kg) and Group III (22-36kg).
•After an accident, the seat may become unsafe due to damage that can not be
noticeable immediately.
•It should therefore be replaced.
The safety of the seat can only be guaranteed by the manufacturer if it is issued
by the original owner.
•We advise you strongly not to use a second-hand product because you are not
sure what has happened to it.
•The harness pads are important for the safety of your child, therefore use them
all the time.
•Ensure that all luggage and objects likely to cause injury in the event of an
accident are properly secured.
WARNING
2. Important Safety Information
2
Original User Manual –FableKids Child Car Seat

WARNING
2. Important Safety Information
3
•The rigid items and plastic parts of a child restraint need to be located and
installed so they are not liable, during everyday use of the vehicle, to
become trapped by a movable seat or in a door of the vehicle.
•Any straps holding the restraint to the vehicle should be tight; the restraint
should be adjusted to the child's body, and should not be twisted.
•It is important to ensure that any lap strap is worn low down so that the
pelvis is firmly engaged.
•The child restraint system should be changed when it has been subject to
violent stresses in an accident.
•It is a danger to make any alterations or additions to the device without the
approval of the Type Approval Authority, and it is also dangerous not
following closely the
•installation instructions.
•Be sure that the child is not left in their child restraint system unattended.
•Be sure that any luggage or other objects liable to cause injuries in the
event of a collision are properly secured.
•The child restraint shall not be used without the cover; The seat cover
should not be replaced with any other than the one recommended by the
manufacturer.
•Do not use any load-bearing contact points other than those described in
the instructions and marked in the child restraint. Please contact the child
restraint
•manufacturer if in doubt about this point.
•Please read the car manufacturer’s handbook during the use of the child
restraint system with ISOFIX.
•REMARK: Your car seat can be fixed safely on almost seats of the cars.
However, on some seats the belts are fixed so that proper installation is not
possible, in that case, try another seat.
Original User Manual –FableKids Child Car Seat

4
3. How to Use the Product
3.1 Use in the vehicle
DO NOT use with 2-point belt.
Please install with the 3-point belt.
Please observe the regulations applicable to your particular country.
The safety belt must be approved to ECE R 16 or a comparable
standard.
Do not use with 2-point belt.Can be used if the vehicle seat is
equipped with a 3-point belt.
You can use your child car seat as follows:
Original User Manual –FableKids Child Car Seat

5
3. How to Use the Product
3.1 Use in the vehicle
(Please observe the regulations applicable to your particular country)
Original User Manual –FableKids Child Car Seat
▪
In the direction of travel Yes
▪
Against the direction of travel Yes
▪
With 2-point belt No
Th
euseof a2-pointbelt substantially increases the risk of injury
to
y
our child inthe eventof an accident.
▪
With 3-point belt Yes
T
he safety belt must be approved to ECE R16 or acomparabl
e
s
tandard (see test label on belt with an "E" or "e" in acircle).
▪
with the ISOFIX and Top Tether anchoring
systems
Yes
If there is afront airbag: Slide the passenger seat a long w
ay
back andrefer to any instructionsin vehicle owner's manual
.
▪
On front passenger seat Yes
D
onot use on passenger seats with a front airbag! The front
pa
ssenger seat maybe used with or without ISOFIX, with the
sa
me notes as currently given for the ISOFIX (slide the seat
back
and refer to vehicle instructions).
▪
On outer rear seat Yes
▪
On centre rear seat Yes
Can be used if the vehicle seat is equipped with 3-point belt

3.1 Use in the vehicle
6
3. How to Use the Product
The seat has two installation methods, the following table shows the installation
types for each group:
Group Facing Towards Seat Installation
method
Child fixation
0+ (0-13kg) Rearward Facing ISOFIX + TOP
TETHER ISOFIX
Class: C
with 5-point
harness
1 (9-18 kg) Forward Facing ISOFIX + TOP
TETHER ISOFIX
Class: B1
with 5-point
harness
2/3 (15-36kg) Forward Facing
FIX +3
-
point vehicle belt
Vehicle belt
3.2 How to use the harness buckle
1. Guide the two buckle latches together.
2. Make sure that the correct side is facing up.
3. Engage them before putting them into the harness buckle, this should
make a CLICK noise.
4. Pull shoulder belts to remove all slack from the lap section ensuring
the harness lies flat and harness buckle is locked. Open the harness
buckle by pressing the red button.
Original User Manual –FableKids Child Car Seat

3.3 Care of the harness buckle
7
3. How to Use the Product
It is vital for the safety of your child that the harness buckle works
correctly. Malfunctions of the harness buckle are usually caused by
accumulations of dirt or foreign bodies.
Malfunctions are as follows:
• The buckle latches are ejected only slowly when the red release
button is pressed.
• The buckle latches will no longer lock (i.e. they are ejected again if
you try to push them in).
• The buckle latches engage without an audible CLICK
• The buckle latches are difficult to insert (you feel resistance).
• The buckle only opens if extreme force is applied.
• Wash out the harness buckle so that it functions properly once again.
3.4 Removing 5-point harness
Original User Manual –FableKids Child Car Seat

3.4 Removing 5-point harness
8
•Open the harness buckle (press the red button).
•Grasp the metal plate from underneath and turn it into a vertical
position.
•Slide the metal plate through the slot.
•Remove the harness buckle.
•Soak the harness buckle in warm water with washing-up liquid for at
least an hour. Then rinse and dry it thoroughly.
3. How to Use the Product
1) Loosen the 5-point harness of the child seat as much as possible
by pressing the button of the crotch belt.
2) Turn the baby safety car seat to the back, unzip the seat cover.
3) Loosen the shoulder belt to access the metal link and connector at
the back of the child seat, remove the belt from the connector,
then remove the shoulder belt from a metal link.
4) Then from the front of the child seat, pull out the shoulder belts
through the slots.
5) Pull both, the shoulder pads and the belts to the front through the
slots (front side of the child seat).
6) Remove the shoulder pads from the shoulder belts and put them
in the storage bag.
7) Roll the shoulder belts separately on both sides and place them
into the fabric cover from the slot of fabric.
8) Grasp the metal plate from underneath and turn it into a vertical
position. Push upwards and slide the metal plate through the slot.
9) Remove the harness buckle with the crotch pad and store it in the
storage bag
3.5 Cleaning the harness buckle
Original User Manual –FableKids Child Car Seat

3.6 Adjust the angle of child safety car seat
9
Two-level positions:
1 - first level,
2 - the second level
Use backrest reclining handle to
adjust the position to 1 or 2, when
forward-facing installation.
3. How to Use the Product
Adjust the reclining angle to position
2 first, then use the backrest rotating
handle to swivel the seat 180°for
rearward facing installation.
There are 3 levels of adjustment in the child safety car seat.
Before placing a child in the child restraint system, the seat must be set
on the recline position for rear-facing use (see picture 3) or in the sitting
position for forward-facing use (see pictures 1 and 2).
To achieve that, use the recline handle located in front of the child
restraint system between the sitting part and the base to adjust the
desired position.
12 3
Original User Manual –FableKids Child Car Seat

10
3. How to Use the Product
3.7 Adjust the length of the harness
To protect your child much better, after fixing him/her in the child
restraint system and locking the buckle, you should tighten the
harness so it is snug and flat against the child's body, should never
be twisted or loose.
To tighten the harness, pull the shoulder belt upwards to remove
the slack from the lap sections of the harness. At the same time
pull the adjuster crotch belt coming from the lock by your other
hand.
To lengthen the harness, press the button on lock between the
child's two legs, then pull the two shoulder belts simultaneously in
your direction, please note while you are doing this hold the
harness, not the harness cover.
CAUTION! Check that the harness straps are not twisted and that
they have been correctly inserted in the belt slots on the cover.
Original User Manual –FableKids Child Car Seat

11
3. How to Use the Product
3.8 Adjusting the headrest in an installation with a 5 point
harness. Group 0 and 1.
•A correctly adjusted harness ensures that the diagonal seat belt
section is positioned, and gives your child the optimal protection.
•The harness must be adjusted so that there is a space of two fingers
wide between the harness and your child’s body.
•A correctly adjusted headrest ensures optimal protection for your
child in the safety seat: shoulder belts are at the same level as your
child’s shoulders.
•Pull the headrest handle, the shoulder
straps will be moved together, select the
correct height and fix them in the correct
position for the child by releasing the
headrest handle.
1) A correctly adjusted headrest ensures that the diagonal seat belt
section is optimally positioned, and gives your child the optimal
protection.
2) The headrest must be adjusted so that a space equivalent to two
fingers remains between the headrest and the child’s shoulders.
3) Pull the headrest handle to adjust headrest to the correct height, then
release the headrest handle. Place the safety seat on the car seat, put
the child in the seat and check the height.
4) Repeat the process until the correct height is achieved.
3.9 Adjusting the headrest in an installation that uses the
vehicle safety belt. Groups 2 and 3.
Original User Manual –FableKids Child Car Seat

12
Warning! Don’t use forward-facing before the child’s weight
exceeds 9kg.
4. INSTALLATION
4.1 Group 0 + (Birth to 13kg) Install Rearward Facing
1) Check that the safety seat is ready to be installed rearward facing (Group
0+1), pull the backrest reclining handle to reclination the seat fully, adjust
the angle of recline to position 2, then release the handle.
2) It is necessary to swivel the seat 180°to place the seat in the opposite
direction of travelling. Release the backrest rotating handle when the seat
is in the desired position.
3) Locate the ISOFIX arms in the base of the seat.
4) Place the seat in the back seat of the vehicle in the opposite direction of
travel.
5) Hold the safety seat with both hands and insert the two ISOFIX arms firmly
into the vehicle’s ISOFIX anchoring points until they fasten with a click on
both sides. The red button will change to green on both sides.
6) Shake the seat to check that it is correctly anchored to the vehicle’s ISOFIX
points.
7) Pull out the Top Tether and press the tether strap release button to
extend the strap until it is long enough to connect it to the Top Tether
anchorage point in the vehicle. If the Top Tether is tightened favourably
and correctly, the button will change to green.
8) Make sure the 5-point harness of the safety seat has been correctly
installed.
9) Open the buckle, put the shoulder harness to the sides, then put the child
into the safety seat. Please check if shoulder harness height is equal to
your child’s shoulder height, press the adjusting device, and pull the
shoulder harness to be loose, then press the headrest handle to adjust the
shoulder harness to the suitable position.
10) Slide the two tongues together into the buckle. The buckle will not work
well till you hear "click". Adjust the child restraint belt to make sure the lap
belt is well restrained to the child's pelvis. Then tighten the shoulder
straps by pulling the adjustable strap at the front of the bottom cushion.
11) If you want to release your child from the safety seat, press the adjusting
device at the front of the bottom, at the same time pull the shoulder
straps. Then press the red button on the buckle, place the shoulder straps
at the side and lift your child out.
Original User Manual –FableKids Child Car Seat

13
4. INSTALLATION
4.1 Group 0 + (Birth to 13kg) Install Rearward Facing
12) The insertion guides facilitate the installation of the safety seat with the
aid of the ISOFIX securing points and prevent damage to the upholstery.
When not in use they should be removed and stored in a safe place. In
vehicles, with a reclining back, the insertion guides should be removed
before the seat is reclined. Problems that may arise are generally the result
of the accumulation of dirt or foreign bodies in the insertion guides and
the clasps. To solve this type of problem simply clean the part in question.
12
3
4
Uninstalling the ISOFIX system
•To release the Top Tether, press the button and pull the tether
strap in the opposite direction (the indicator will change from
green to red color).
•Press backward the ISOFIX System unlock buttons (the indicator
will change from green to red color), in order to free the seat from
the vehicle ISOFIX anchoring system.
Original User Manual –FableKids Child Car Seat

14
4. INSTALLATION
4.2 Group 1 (9 to 18kg) Install Forward Facing
1) Ensure the seat is ready to be installed forward-facing (Group 1), pull
the backrest reclining handle to adjust to angle to any position 1 or 2,
then release the handle.
2) It is necessary to swivel the seat 180º to place the seat in the direction of
travel. Release the backrest rotating handle when the seat is in the
desired position.
3) Locate the lSOFIX arms in the base of the seat.
4) Place the child safety seat in the back seat of the vehicle facing in the
direction of travel.
5) Hold the child seat with both hands and insert the two ISOFIX arms
firmly into the vehicle’s ISOFIX anchoring points until they fasten with a
click on both sides. The red button will change to green on both sides.
6) Shake the seat to check that it is correctly anchored to the vehicle's
ISOFIX points.
7) Pull out the Top Tether and press the tether strap release button to
extend the strap until it is long enough to connect it to the Top Tether
anchorage point in the vehicle. If the Top Tether is tightened favourably
and correctly, the button will change to green.
8) Make sure the 5-point harness of the safety seat has been correctly
installed.
9) Open the buckle, put the shoulder harness to the sides, then put the
child into the safety seat. Please check if shoulder harness height is
equal to your child’s shoulder height, press the adjusting device and
pull the shoulder harness to be loose, then press the handle of the
headrest to adjust the shoulder harness to the suitable position.
10)Slide the two tongues together into the buckle. The buckle will not work
well till you hear “click”. Adjust the child restraint belt to make sure the
lap belt is well restrained to the child’s pelvis. Then tighten the shoulder
straps by pulling the adjustable strap at the front of the bottom cushion.
11) If you want to release your child from the safety seat, press the
adjusting device at the front of the bottom, at the same time pull the
shoulder straps. Then press the red button on the buckle, place the
shoulder straps at the side and lift your child out.
Original User Manual –FableKids Child Car Seat

15
4. INSTALLATION
4.2 Group 1 (9 to 18kg) Install Forward Facing
12) The insertion guides facilitate the installation of
the safety seat with the aid of the ISOFIX securing
points and prevent damage to the upholstery. When
not in use they should be removed and stored in a
safe place. In vehicles, with a reclining back, the
insertion guides should be removed before the seat
is reclined. Problems that may arise are generally
the result of the accumulation of dirt or foreign
bodies in the insertion guides and the clasps. To
solve this type of problem simply clean the part in
question.
Note：
Use backrest rotating handle to swivel the seat 180º for forward facing
installation, backrest hanger and L-backrest hanger are hooked each
other.
Uninstalling the ISOFIX system
•To free the Top Tether, press the button and pull the tether strap in the
opposite direction(the indicator will change from green to red color), in
order to take off the top tether.
•To free the lSOFIX anchoring, press backwards the ISOFIX System
unlock buttons (the indicator will change from green to red color), in
order to free the seat from the vehicle ISOFIX anchoring system.
Original User Manual –FableKids Child Car Seat

16
4. INSTALLATION
4.3 Group 2/3(15 to 36kg) Install Forward Facing
1) Ensure that the child seat’s 5-point harness and buckle are removed
correctly.
2) Ensure the seat is ready to be installed forward-facing (Group 2/3),
pull the backrest reclining handle to adjust to angle to any position
1 or 2, then release the handle.
3) It is necessary to swivel the seat 180º to place the seat in the
direction of travel. Release the backrest rotating handle when the
seat is in the desired position.
4) Before installing the safety seat, place your child in the seat and
adjust the headrest to the correct height.
5) Place the child safety seat in the back seat of the vehicle facing in
the direction of travel.
6) Hold the child seat with both hands and insert the two ISOFIX arms
firmly into the vehicle’s ISOFIX anchoring points until they fasten
with a click on both sides. The red button will change to green on
both sides.
7) Shake the seat to check that it is correctly anchored to the vehicle's
ISOFIX points.
8) Place your child in the safety seat.
9) Pass the vehicle seat belt through the bottom of the armrest, ensure
the lap belt is stretched as low as possible over the child’s hips,
buckle the vehicle seat belt until hearing a click. Place the diagonal
belt through the red belt guide hook. It should pass in the middle
between the child’s shoulder and neck.
Original User Manual –FableKids Child Car Seat

17
4. INSTALLATION
4.3 Group 2/3(15 to 36kg) Install Forward Facing
Note: Use backrest rotating handle to swivel the seat
180°for forward-facing installation. The Backrest hanger
and L-backrest are hooked to each other.
Uninstalling the ISOFIX system
To release the ISOFIX anchoring, press backward the ISOFIX
System unlock buttons (the indicator will change from green to
red color).
10) The insertion guides facilitate the installation of the safety
seat with the aid of the ISOFIX securing points and prevent
damage to the upholstery. When not in use they should be
removed and stored in a safe place. In vehicles with a reclining
back the insertion guides should be removed before the seat is
reclined. Problems that may arise are generally the result of the
accumulation of dirt or foreign bodies in the insertion guides and
the clasps. To solve this type of problem simply clean the part in
question.
Original User Manual –FableKids Child Car Seat