Falcon DOMINATOR PLUS E3405 CHIP SCUTTLE User manual

DOMINATOR PLUS
E3405 CHIP SCUTTLE
CAUTION: Read the instructions before
using the appliance.
USERS INSTRUCTIONS
SECTION 1 - GENERAL DESCRIPTION
SECTION 2 - CONTROLS and OPERATION
SECTION 3 - COOKING HINTS
SECTION 4 - CLEANING and MAINTENANCE
This appliance has been UKCA/CE marked based on compliance with the relevant Electrical and
Electromagnetic Compatibility (EMC) Regulations/Directives for the voltages stated on the data plate.
IMPORTANT
This appliance must only be installed by a competent person in compliance with the regulations in
force at the time.
UK regulations are listed on the front of the Installation and Service Manual.
Regular servicing by a qualified person is recommended to ensure the continued safe and efficient
performance of the appliance.
WARNING - THIS APPLIANCE MUST BE EARTHED!
PREVENTATIVE MAINTENANCE CONTRACT
To obtain maximum performance from this unit regular servicing of the appliance should be undertaken to
ensure correct operation, it is functioning as intended, and safe to use. We recommend servicing in
accordance with SFG20 Maintenance Schedules and as a minimum, after 2,500 hours of use, or annually,
whichever comes first and that a maintenance contract be arranged with an appointed service contact.
Visits may then be made at agreed intervals to carry out adjustments and repairs.
This equipment is designed FOR PROFESSIONAL USE ONLY and be operated by QUALIFIED persons. It
is the responsibility of the supervisor or equivalent to ensure that the user wears SUITABLE PROTECTIVE
CLOTHING. Attention should also be drawn to the fact that some parts of the appliance will, by necessity,
become VERY HOT and could cause burns if touched accidentally.
WEEE Directive Registration No. WEE/DC0059TT/PRO
At end of unit life, dispose of appliance and any replacement parts in a safe manner, via a
licensed waste handler.
Units are designed to be dismantled easily and recycling of all material is encouraged
whenever practicable.
Falcon Foodservice Equipment
Head Office and Works
Wallace View, Hillfoots Road,
Stirling. FK9 5PY. Scotland.
PHONE : [phone]
T100824 Ref 5

SECTION 1 –
GENERALDESCRIPTION
The E3405 is a 400mm wide electric chip scuttle.
It is designed to be mounted on a worktop or similar surface. Alternatively, it can be installed upon a fixed or
mobile stand.
Heating element is controlled by a single switch. A red neon indicates that power is available (i.e. isolating
switch is on). The amber neon will go out when the set temperature has been reached.
This unit is designed to accommodate standard 1/1 gastronorm containers (530mm x 325mm) with a
maximum depth of 150mm.
Warning - THIS APPLIANCE MUST BE EARTHED.
SECTION 2-
CONTROLS AND OPERATION
This unit must be installed by a suitably qualified person.
A mains input connecting cable is supplied. If supply cable is damaged, it must be
replaced by manufacturer, service agent or similarly qualified person.
Red neon will light when mains supply is on.
Switch on, amber neon will light.
Allow 15 –20 minutes heat up time before filling container with chips.
Switch off after use.
Red Amber
Neon Neon

SECTION 3-
STORING HINTS
The over-pan ceramic element warms the stored chips while an element heats the
container from down below.
SECTION 4-
CLEANING and MAINTENANCE
Switch off power to unit prior to cleaning.
Allow pan to cool before cleaning.
Clean pan and drip tray with hot, soapy water and a soft cloth.
NEVER USE a spray jet to clean this appliance.
SERVICE INFORMATION
This unit carries an extensive mainland UK warranty. The warranty is in addition to and does not change
your statutory or legal rights.
The warranty policy can be found on our website which details the conditions of the warranty and the
exclusions.
https://www.falconfoodservice.com/info-centre/policy
Service calls to equipment under warranty will be carried out in accordance with the conditions of sale.
Warranty calls can be made between 8:30 am and 5:00 pm weekdays only.
To ensure your warranty enquiry is handled as efficiently as possible, ensure you have the following
appliance information prior to calling us:
1. Model number –found on data plate
2. Serial number –found on data plate
3. Brief description of the issue
To contact Falcon for a warranty issue dial (UK only) 01786 455 200 and select Warranty Issues from the
menu.