Famco CA-500 User manual

http://www.technoflex.es/
Cortadora de Asfalto CA-500
Concrete Cutter CA-500
Manual de Instrucciones / Lista de Recambios
Instruction Manual / Spare Parts


MAQUINARIA PARA LA CONSTRUCCIÓN Y OBRAS PÚBLICAS
BUILDING AND PUBLIC WORKS MACHINERY

Este manual contiene información y procedimientos que son necesarios para utilizar
y mantener esta máquina.Para su propia seguridad y protección, por favor lea
cuidadosamente, entienda y observe todas las instrucciones de seguridad descritas
en este manual. LOS DATOS CONTENIDOS EN ESTE MANUAL SON CORRECTOS
EN EL MOMENTO DE SU EDICIÓN. NO OBSTANTE EL FABRICANTE SE RESERVA
EL DERECHO DE MODIFICAR LAS CARACTERÍSTICAS, SIN PREVIO AVISO A
FAVOR DEL COMPROMISO DE MEJORA CONTINUA.
This manual provides information and procedures to safely operate and maintain this
machine. For your own safety and protection from injury, carefully read, understand
and observe the safety instructions described in this manual. THE INFORMATION
CONTAINED IN THIS MANUAL ARE CORRECT FROM THE MOMENT OF EDITING.
HOWEVER THE MANUFACTURER RESERVES THE RIGHT TO MODIFY THE
CHARACTERISTICS, WITHOUT PRIOR NOTICE IN CONSIDERATION OF
CONTRACT COMMITMENT OF CONTINUOUS IMPROVEMENT.
Mantenga este manual ó una copia de él con la máquina. Si se pierde ó
Ud. desea un ejemplar adicional haga el favor de comunicarse con
INDUSTRIAS TECHNOFLEX S.A. Esta máquina fue fabricada con la
seguridad del usuario en mente; sin embargo, situaciones peligrosas
pueden presentarse si la máquina es utilizada inapropiadamente. Siga
las instrucciones de utilización cuidadosamente. Si Ud. tiene preguntas
ó dudas acerca de la utilización o mantenimiento de este equipo, haga el
favor de comunicarse con INDUSTRIAS TECHNOFLEX S.A.
Keep this manual or a copy of it with the machine. If you lose this
manual or need an additional copy, please contact INDUSTRIAS
TECHNOFLEX S.A. This machine is built with user safety in mind,
however, it can present hazards if improperly operated and serviced.
Follow operating instructions carefully! If you have questions about
operating or servicing this equipment, please contact INDUSTRIAS
TECHNOFLEX S.A.

OPERATION
1.1 Safety Notes
This manual contains CAUTIONS and WARNINGS which must be followed to prevent the possibility
of improper service, damaged to the equipment, or personal injury. Read and follow all the
CAUTIONS and WARNINGS included in this instructions manual.
WARNING: Warnings warn of conditions or practices which
could lead to personal injury.
1.2 Warning and Safety Instructions
Read All Instructions
WARNING
Familiarity and proper training are required for the safe operation of this equipment! Equipment
operated or serviced improperly or by untrained personnel can be dangerous! Read all operating
instructions and the safety notes below. Familiarize yourself with the proper use of this equipment
before operating it.
Sound Specifications
The required sound specifications, called-for by the EC-Machine Regulations per Appendix 1,
Paragraph 1.7.4 f, are :
Sound pressure level at the operator’s location LPA=92 dB (A)
Sound power level LWA=105 dB (A)
The sound values were determined according to ISO 3744 for the sound power level ( LWA ) and,
alternately, ISO 6081 for the sound pressure level (LPA) at the operator’s location.
The weighted effective value of acceleration, determined acording to 8662, Part 1, is, 3,5m/s2
The noise and vibration data were determined while the machine was cutting concrete at a depht of
30mm with the engine running at nominal speed.
3

OPERATION
1.NEVER operate with the rammer for other
aplication that cutt concrete.
2.NEVER allow improperly trained people to
operate this equipment. People operating this
equipment must be familiar with the potential
risks and hazards associated with it.
3.NEVER touch engine or muffler while the
equipment is operating or inmediately after it
has been turned off. These areas get hot and
may be cause burns.
4.NO use accessories or attachtments, wich are
no recommended by INDUSTRIAS
TECHNOFLEX S.A. for this equipment.
Damage to equipment and/or injury to user
may result.
5.DO NOT touch any parts of the engine when it
is working or within short time after it stops, for
the temperature of these parts are very high
when it works. Satorage and transportation
after it is cooled is acceptable.
6. NEVER operate machine with the belt guard
missing. Exposed drive belt and pulleys create
potentially dangerous
hazards that can cause serious injuries.
7.NEVER leave machine running unattended.
8.NEVER run machine indoors or in an enclosed
area unless adequate ventilation, through such
items as exhaust fans or hoses, is provided.
Exhaust gas fram the engine contains
poisonous carbon monoxide gas; exposure to
carbon monoxide can cause los s of
consciousness and may lead to death.
9.ALWAYS keep hands, feet, and loose clothing
away fram moving parts of equipment.
10.Keep your work area clean and free of clutter.
11.Keep your work area well lit.
12.NEVER operate motor in areas exposed to
flammable or explosive liquids or gases! The
motor brushes spark during operating and
could ignite fumes.
13.DO NOT allow children or people other
than the operator to handle power cables,
extension cords or the equipment.
14.DO NOT allow children or people other
than the operator to handle power cables,
extension cords or the equipment.
15.DO NOT allow non-essential personnel or
visitors in the work area.
16.Wear protective clothing when operating
equipment. Goggles or safety glasses will
protect against eye damage caused by
flying debris.
17.DO NOT force tool. Use the correct tool for
which it is designed.
18.NEVER allow untrained personnel to
operate or service the equipment.
19.Maintain tools with care. Keep vibrator unit
clean for better and safer performance.
Inspect motor cord periodically and if
damaged, have it repaired by an authorized
service facility.
20.NEVER use the motor with a defective
switch. If the switch does not turn the motor
"ON" or "OFF", have it repaired by an
authorized service facility before using the
motor.
21.Replace worn or damaged parts with
replacement parts designed and
recomended for use by INDUSTRIAS
TECHNOFLEX S.A.
22.Any servicing, other than that covered in
this instruction manual, should be
performed by an authorized INDUSTRIAS
TECHNOFLEX S.A Service Representative.
23.NEVER operate the machine outside the
using are; operate the machine in
flammable environment is forbidden.
Save these instructions!
4

5

6

7

8

9

10

11

12

13

14

Pos. Código / Code Descripción Description Cantidad / Qty
1 908001 Tornillo M12x20 Bolt M12x20 2
2 908002 Arandela muelle M12x20 Spring washer 12 2
3 908003 Arandela profunda Deep washer 2
4 908004 Goma rueda trasera Rubber wheel (rear) 2
5 908005 Indicador Indicator 1
6 908006 Cojinete y soporte Bearing & bracket 2
7 908007 Arandela muelle 12 Spring washer 12 8
8 908008 Tornillo M12 Bolt M12 8
9 908009 Soporte ruedas Wheel rack module 1
10 908010 Tuerca 12 Nut 12 1
11 908011 Arandela muelle 12 Spring washer 12 1
12 908012 Arandela 12 Washer 12 1
13 908013 Tornillo M12x120 Bolt M12x120 1
14 908014 Placa base Base assy 1
15 908015 Tuerca M12 Nut M12 4
16 908016 Arandela muelle 12 Spring washer 12 4
17 908017 Arandela Washer 12 4
18 908018 Tornillo M12 Bolt M12 4
19 908019 Goma rueda frontal Rubber wheel (front) 2
20 908020 Arandel profunda Deep washer 2
21 908021 Arandela muelle 8 Spring washer 8 2
22 908022 Tornillo M8x22 Bolt M8x22 2
23 908023 Disco protección Blade guard 1
24 908024 Arandela 10 Washer 10 1
25 908025 Tornillo M10 Bolt M10 1
26 908026 Tuerca M10 Nut M10 1
27 908027 Arandela 10 Washer 10 1
28 908028 Tornillo Screw 1
29 908029 Tornillo M10x25 Bolt M10x25 1
30 908030 Arandela Washer 1
31 908031 Arandela muelle 10 Spring washer 10 1
32 908032 Polea Pulley 1
33 908033 Cojinete y soporte Bearing & bracket 2
34 908034 Llave 8x38 Key 8x38 1
35 908035 Eje principal Principal axis 1
36 908036 Pasador C6 Pin C6 1
37 908037 Tuerca Nut M8 1
38 908038 Disco brida interno Blade flang (inner) 1
39 908039 Pasador Pin 1
40 908040 Disco Blade 1
41 908041 Disco brida externo Blade flang (out) 1
42 908042 Tuerca Nut 1
43 908043 Llave Key 1
44 908044-1 Polea motor diesel Engine pulley for diesel 1
908044-2 Polea motor Honda Engine pulley for Honda 1
908044-3 Polea motor Robin Engine pulley for Robin 1
45 908045-1 Correa SPA-GB11544 Diesel V-belt SPA-GB11544 diesel 1
908045-2 Correa SPA-GB11544 Gasolin V-belt SPA-GB11544 petrol 1
46
15

Pos. Código / Code Descripción Description Cantidad / Qty
47 908047 Placa base motor Base assy. for engine 1
48
908048
Tornillo M10x30 Bolt M10x30 8
49
908049
Arandela muelle 10 Spring washer 10 8
50
908050
Arandela 10 Washer 10 8
51
908051
Tuerca M12 Nut M12 3
52
908052
Arandela 12 Washer 12 1
53
908053
Tornillo M12x45 Bolt M12x45 1
54
908054
Puntero Pointer 1
55
908055
Tornillo M12x110 Bolt M12x110 1
56
908056
Tuerca Nut 1
57
908057
Arandela 12 Washer 12 1
58
908058
Rueda puntero Pointer wheel 1
59
908059
Tuberia de plastico Plastic pipe 3
60
908060
Tuberia en “T” Tee pipe 1
61
908061
Válvula grifo Cock 2
62
908062
Codo Elbow bend 1
63
908063
Tuerca Nut 1
64
908064
Tuerca Nut 1
65
908065
Codo Elbow 1
66
908066
Depósito de agua Water tank 1
67
908067
Cable accelerador Throttle cable 1
68
908068
Maneta accelerador Throttle control 1
69
908069
Empuñadura manillar Handle bar grip 2
70
908070
Palanca Handle lever 2
71
908071
Cubierta depósito Tank cover 1
72
908072
Boca de inyección Injection mouth 1
73
908073
Tornillo M10 Bolt M10 4
74
908074
Tornillo M10 Bolt M10 4
75
908075
Fijación Knob 3
76
908076
Llave inglesa Wrench 1
77
908077
Tornillo M8x30 Bolt M8x30 1
78
908078
Arandela muelle 8 Spring washer 8 1
79
908079
Arandela 8 Washer 8 1
80
908080
Soporte Board plug 1
81
908081
Soporte orientción Orientation board 1
82
908082
Arandela 10 Washer 10 2
83
908083
Arandela muelle 8 Spring washer 8 2
84
908084
Tornillo M10 Bolt M10 2
85
908085
Arandela 8 Washer 8 1
86
908086
Arandela muelle 8 Spring washer 8 1
87
908087
Tornillo M8x20 Bolt M8x20 1
88
908088
Palanca elevación Manual raise/lower assy. 1
89
908089
Tuerca Nut 1
90
908090
Tornillo M6x10 Bolt M6x10 1
91
908091
Tornillo Screw 1
92
908092
Cojinete y soporte Bearing & Bracket 1
93
908093
Tuerca M10 Nut M10 1
94
908094
Soporte Bracket 1
95
908095
16

INDUSTRIAS TECHNOFLEX, S.A.
C/Josep Pujol, s/n. esq. Ctra. d’Ullastrell s/n
Apartado de correos, 43
E-08191 RUBÍ (Barcelona)-SPAIN
Tel. [phone]
Fax [phone]
e-mail: [email protected]
Internet: http://www.technoflex.es
Cód.:4046600025 / 07.11