fantastic furniture Newhaven User manual

APPROVED LP 04/01/2020

Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it! Share it!
Fantastic buy! Share how it looks at home at Instagram for
your chance to win a $2 0 Fantastic Furniture Gift Card!
@fantasticfurniture
www.fantasticfurniture.com.au Page 2
Warning: Ensure the wall strap is
Warning: Ensure the wall strap is Warning: Ensure the wall strap is
Warning: Ensure the wall strap is
attached to avoid serious injury.
attached to avoid serious injury.attached to avoid serious injury.
attached to avoid serious injury.
To avoid any serious of fatal injury, a wall strap has been provided with
this product to prevent toppling. We strongly recommend that this
product is permanently fixed to the wall or other suitable surface. Fixing
devices are not included since different surface materials require
different attachments. Please seek professional advice if you are in
doubt of what fixing device to use.

Assembly checklist
Read through the instructions carefully
before you begin
Make sure you have all the required tools.
Never use power tools unless instructed
Identify and layout all of the components
before you begin assembly.
Unless instructed, do not fully tighten screws,
until the item is fully assembled
Never use power tools unless specifically instructed. hey can damage your components or
hardware if used incorrectly.
!
he most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
!
Always use a soft surface ( such as carpet or cardboard ) when assembling your products to
avoid scratching or damaging the surface of the products.
Useful Information
Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
Never use any glue until you are certain that the parts belong together.
Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
!
!
!
!
If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!
Please see page 2 for any safety requirements or weight restrictions.
!
Page 3
www.fantasticfurniture.com.au

What you need
to assemble the product
Other tools you need:
Phillips Head Screwdriver;
Page 4
www.fantasticfurniture.com.au
Parts list
Table Top (P1)
ight Frame (P2)
Left Frame (P3)
Front ail (P4)
Back ail (P5)
Top Back Panel (P6)
Divider Panel (P7)
Bottom Back Panel (P8)
Bottom Shelf (P9)
2 x Left Shelves (P10)
1 x ight Shelf (P11)
Hardware Pack
12 x Long Bolts
(H1)
4 x Nuts
(H2)
2 x Short Bolts
(H3)
2 x Spring Washers
(H4)
2 x Flat Washers
(H5)
4 x Cam Bolts
(H6)
4 x Cam Nuts
(H7)
12 x Metal Pins
(H8)
2 x Bar Handles
(H9)
4 x Handle Screws
(H10)
1 x Magnetic Catch
(H11)
2 x Door Metals
(H12)
1 x Allen Key
(H13)
2 x Short Screws
(H14)
8 x Long Screws
(H15)
12 x Wood Buttons
(H16)
2 x Castors With
Lock (H17)
2 x Castors
(H18)
1 x Safety Strap Kit
(H19)
Towel Bar (P12)
Door (P13)
Drawer Front Panel (P14A)
Drawer Side Panel ( ight) (P14B)
Drawer Side Panel (Left) (P14C)
Drawer Back Panel (P14D)
Drawer Bottom Panel (P14E)

Step 16
Page 15
www.fantasticfurniture.com.au
You will need
12 x Wood Buttons
(H16)
Co er the bolt hole using 12 x wood buttons (H16) as shown. You can lock and
un-lock the wheels by mo ing the le er on the 2 x castors with locks (H17) as
shown.
Step 17
Slide the assembled drawer into the unit as shown.
Un-lock
Lock

Step 19
Page 16
www.fantasticfurniture.com.au
Step 18
You will need
1 x Safety Strap Kit
(H19)
P illips Head
Screwdriver
Move t e kitc en cart to its final position and t en secure t e wall strap to t e
wall. Ensure it is firmly attac ed. T e screws and wall plugs are not provided.
Please use appropriate fixtures for your wall. Seek advice from a qualified trades
person on ow to attac t is safety strap to your specific wall.
(H19)
If you intend to keep t e kitc en cart in a permanent location, secure it to t e wall using t e
safety strap kit (H19) provided. Secure t e strap to t e back of t e cart using t e flat was er
and screw (H19) provided, tig tening wit a p illips ead screwdriver.

Page 17
www.fantasticfurniture.com.au
Job complete!
In the interest of our environment please dispose
all packaging thoughtfully.
Step 20