fanttik EVO300 User manual

Portable Power Station EVO300
Model: EVO300

Contents
01~12
13~25
26~37
1.English
2.
Español
3. 日本語
WARRANTY

Portable Power Station EVO300
Thank you for trusting in Fanttik Portable Power Station EVO300. It is designed as an outdoor emergency power supply with multiple output ports to charge
most of your devices, including laptops, phones, tablets, drones, cameras, CPAP machines, etc.
Contents
1.PRODUCT OVERVIEW
2.PACKAGE CONTENTS
3.DISPLAY SCREEN
4.LED FLASHLIGHT
5.RECHARGING
6.CHARGEABLE DEVICES
7.CHARGING MODES
8.SPECIFICATIONS
9.FAQ
10.TROUBLESHOOTING
11.SAFETY INSTRUCTION
- 01 -
02
03
04
05
05
06
07
09
09
10
11

1. PRODUCT OVERVIEW
1.Display Screen
2.Display Button
3.DC Button
4.5V/3A Input
5.PD 60W
6.12V/10A Output
7.QC3.0 Output
8.12V/10A Output(120W)
9.5V/2.4A Output
10.AC Output
11.AC Button
12.Handle
13.LED Button
14.Floodlight
15.Anderson Port
16.DC 7909 Input
FRONT VIEW BACK VIEW
13
14
15
16
- 02 -
1
2
3
4
5
6
7 8 9 10
11
12

2. PACKAGE CONTENTS
EVO300 Power Station x 1 Car Cigarette Charging Cable x 1 AC Wall Charger x 1
User Manual x 1 Quick Start Guide x 1Accessory Bag x1
USB-C to USB-C Cable x 1
Carefully check package contents, if anything is missing or damaged, please contact online customer service for support.
- 03 -

3. DISPLAY SCREEN
OUTPUT
Output Power
Undercooling
Overheating
Error Alert Available Duration
DC/AC Indicator Light
Input Power Remaining
Charging Time
Real-time Power
●General View
●Display Description
OUTPUT
TIME
TIME
Hrs
INPUT
W
W
%
OUTPUT
TIME
TIME
Hrs
Hrs
INPUT
W
W
%
Hrs
%
OUTPUT
TIME
TIME
INPUT
W
W
1.Charging Input Display 2.Charging Input(DC +AC Dual Output) Display 3.Display Switch
4.AC Function Display 5.DC Function Display 6.DC Key +AC Key Display
OUTPUT
TIME
TIME
INPUT
W
W
%
%
OUTPUT
TIME
TIME
INPUT
W
W
- 04 -

4. LED Flashlight
5. RECHARGING
To use the LED Flashlight, simply press the LED switch button to turn it on. There are 3 light modes including an SOS mode.
Multiple Input choices are compatible for the EVO300 Power Station：
X1 To activate the low-light(50% of maximum brightness), press the LED light button once when the light is
off.
X2 To activate the high-light(max brightness), press the LED light button twice in a row when the light is off.
X3 To activate the SOS light mode, press the LED light button three times in a row when the light is off.
X4 Press the LED light button four times consecutively to finish a cycle and turn off the light again.
AC Adaptor Car Charger Solar Panel USB-C Port (PD60W)
- 05 -

6. CHARGING DEVICES
EVO300 portable power station is a versatile product with different types of ports. Therefore, it is compatible and capable to charge multiple devices.Please note
the EVO300 power station can't support devices rated over 300W.
Laptop
Camera
Tablet
Smartphone
Drone Car refrigerators
● USB Port: Smartphone, tablets, smartwaches, digital cameras, E-readers, etc.
● AC Power : Laptops, displays, appliances, etc.
● DC Output (12V) : Drones, routers, car refrigerators, etc.
- 06 -

7. CHARGING MODES
it is highly recommended to fully charge EVO300 portable power station before activating it to charge other devices. To charge the EVO300 power station,
users may choose wall charger, car charger, or solar panel. It may take 4-6 hours to reach a full charge with the included wall charge. (Solar panels’
efficiency might be impacted by weather issues)
Note: Please charge the product before use.
● Charge with Solar Panel(not included)
1. Choose suitable solar panel(DC12~30V/120W)
2. Solar panels will perform better in open south-facing locations that get direct sunlight. Simply connect solar panels to your EVO300 portbale power
station. 3. When the product is charged fully by the solar, it will stop charging automatically.
Notes:
(1)Recommended to charge the product under 0~40℃temperature environment.
(2)Charging times varies depending on the intensity of solar light.
(3)Make sure that the positive and negative poles of solar panels are connected correctly.
● Charge with AC wall Charger
Plug the product into socket via the AC wall charger.
Please unplug the charger when the recharging is finished.
It is normal for this product to get warm during charging.
Charge the product only after starting the engine
Connect the product and the Cigarette Lighter Socket via the Car Cigarette Charging Cable.
Charge the product after starting the car.
If the car battery is 12V, the product cannot be fully charged. If the car battery is 24V, the product can be fully charged.
Charge by the USB-C Port (PD60W)
Choose a USB-C Power Adapter(not included).
Connect the product and adapter through the PD60W Port with the original USB-C to USB-C cable.
- 07 -

Choose suitable solar panel(DC12~30V/120W)
Solar panels will perform better in open south-facing locations that get direct sunlight. Simply connect solar panels to your T300 portbale power station.
When the product is charged fully by the solar, it will stop charging automatically.
Recommended to charge the product under 0~40℃temperature environment.
Charging times varies depending on the intensity of solar light.
Make sure that the positive and negative poles of solar panels are connected correctly.
1.
2.
Note:
(1)
●
1.
2.
Note:
(1)
●
1.
2.
Plug the product into socket via the AC wall charger.
Please unplug the charger when the recharging is finished.
It is normal for this product to get warm during charging.
Charge the product only after starting the engine
Connect the product and the Cigarette Lighter Socket via the Car Cigarette Charging Cable.
Charge the product after starting the car.
If the car battery is 12V, the product cannot be fully charged. If the car battery is 24V, the product can be fully charged.
Charge by the USB-C Port (PD60W)
Choose a USB-C Power Adapter(not included).
Connect the product and adapter through the PD60W Port with the original USB-C to USB-C cable.
- 08 -

8. SPECIFICATIONS
9. FAQ
Model
Capacity
USB-C-1
USB-C-2
USB-1
USB-2
Battery
Frequency
Solar Charger
Weight
EVO300
83,200mAh/299Wh
PD60W
5V/3A
5V/2.4A
QC 3.0 18W
Lithium-ion
60Hz
MPPT 12-30V
10.9 lbs
A: T300 power stations have a built-in MPPT controller.
Note: Storage instruction: fully charged every 3 months for best results and store it between -20 and 45 °C. Keep your portable power station away from heat and
direct sunlight in order to extend its life span.
Q5: Can it charge and discharge simultaneously?
Yes, but it is not recommended to charge and discharge at the same time in order to preserve battery lifespan.
Q6: How to extend the using time of CPAP?
Recommend to turn off its humidifier, heater, and set a lower pressure.
Q7: Can the AC output carry a refrigerator or air conditioner?
Workable for low power, and over 100W is not recommended. The starting power of refrigerators and air conditioners is generally 5~7 times higher than the rated
power, which easily triggers AC overload.
Q8: Can two power stations be used in parallel?
No.
If the product cannot charge or power other devices, please checking according to the following steps:
1.
2.
3.
4. ●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Q1: What devices can EVO300 power?
A: Please note that the AC output port can only charge/power devices that operate at less than total 300 Watt.
●
●
Q2: Can the EVO300 be charged while using?
A: Yes, EVO300 supports pass-through charging. But we don't suggest, it will cause damage to battery
life.
Q3: How to know the working times for my device? Why does the duration of some devices deviate from the actual usage data?
A: Working time = 299Wh* 0.85/operating wattage of your device. The duration of our equipment is based on laboratory data, and the duration of specific
equipment usage may vary.
Q4: Does EVO300 include a built-in MPPT controller?
- 09 -

Q1: What devices can T300 power?
A: Please note that the AC output port can only charge/power devices that operate at less than total 300 Watt.
Q2: Can the T300 be charged while using?
A: Yes, T300 supports pass-through charging. But we don't suggest, it will cause damage to battery life.
Q3: How to know the working times for my device? Why does the duration of some devices deviate from the actual usage data?
A: Working time = 299Wh* 0.85/operating wattage of your device. The duration of our equipment is based on laboratory data, and the duration of specific
equipment usage may vary.
Q4: Does T300 include a built-in MPPT controller?
10. TROUBLESHOOTING
A: EVO300 power stations have a built-in MPPT controller.
Note: Storage instruction: fully charged every 3 months for best results and store it between -20 and 45 °C. Keep your portable power station away from heat and
direct sunlight in order to extend its life span.
Q5: Can it charge and discharge simultaneously?
Yes, but it is not recommended to charge and discharge at the same time in order to preserve battery lifespan.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Q6: How to extend the using time of CPAP?
Recommend to turn off its humidifier, heater, and set a lower pressure.
●
●
Q7: Can the AC output carry a refrigerator or air conditioner?
Workable for low power, and over 100W is not recommended. The starting power of refrigerators and air conditioners is generally 5~7 times higher than the rated
power, which easily triggers AC overload.
Q8: Can two power stations be used in parallel?
No.
If the product cannot charge or power other devices, please checking according to the following steps:
1. Make sure the power button is turned on.
2. Make sure the AC and DC power button are on.
3. Check the battery capacity, if it’s lower than 10%, please recharge the product as soon as possible.
4. Make sure the load power connected didn’t exceed the limit power of the product, each port has a limit for the power connected.
- 10 -

11. SAFETY INSTRUCTIONS
Q1: What devices can T300 power?
A: Please note that the AC output port can only charge/power devices that operate at less than total 300 Watt.
Q2: Can the T300 be charged while using?
A: Yes, T300 supports pass-through charging. But we don't suggest, it will cause damage to battery life.
Q3: How to know the working times for my device? Why does the duration of some devices deviate from the actual usage data?
A: Working time = 299Wh* 0.85/operating wattage of your device. The duration of our equipment is based on laboratory data, and the duration of specific
equipment usage may vary.
Q4: Does T300 include a built-in MPPT controller?
A: T300 power stations have a built-in MPPT controller.
Note: Storage instruction: fully charged every 3 months for best results and store it between -20 and 45 °C. Keep your portable power station away from heat and
direct sunlight in order to extend its life span.
Q5: Can it charge and discharge simultaneously?
Yes, but it is not recommended to charge and discharge at the same time in order to preserve battery lifespan.
Q6: How to extend the using time of CPAP?
Recommend to turn off its humidifier, heater, and set a lower pressure.
Q7: Can the AC output carry a refrigerator or air conditioner?
Workable for low power, and over 100W is not recommended. The starting power of refrigerators and air conditioners is generally 5~7 times higher than the rated
power, which easily triggers AC overload.
Q8: Can two power stations be used in parallel?
No.
If the product cannot charge or power other devices, please checking according to the following steps:
1.
2.
3.
4.
Error code (Output)
E1
E2
E3
E4
E11
E12
E13
E14
E15
E16
E17
E18
Cause
Over temperature protection
Low temperature protection
Battery over voltage
Input over voltage
Discharge over temperature
Discharge low temperature
USB-A/USB-C input over current or short-circuit
QC input over current or short-circuit
Power supply reverse
DC 12V input over current or short-circuit
AC 110V input over current or short-circuit
Total power output overloaded
Solution
Auto Recover/unplug all charging devices
Auto Recover/unplug all charging devices
Auto Recover
Auto Recover
Auto Recover
Auto Recover
Recovery by pressing DC button
Recovery by pressing DC button
Recovery by pressing DC button
Recovery by pressing DC button
Recovery by pressing AC button
Recovery by pressing AC button
IMPORTANT
Noncompliance may very likely lead to serious injury or death
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Do not disassemble, repair or modify the unit or the battery.
Do not place the unit close to or in a fire or expose it to the heat. Keep out of direct sunlight.
Do not charge, use or store the unit in a bathroom or in an area exposed to rain or moisture.
Only use the output socket to power external devices. Never connect the output to mains power under any circumstance.
Do not touch the unit or the plug-in points if your hands are wet.
Do not connect any metallic objects to the AC input or output.
Do not rub your eyes if fluids from inside the unit should get in your eyes.
Do not dispose the unit together with household waste.
Do not use any inappropriate power cords.
Do not operate the unit if it is not functioning correctly.
Do not move the unit if it is recharging or in use.
Do not put fingers or hands into the product.
Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or
risk of injury.
Do not disassemble the power pack, take it to a qualified service person when service or repair is needed. Incorrect reassembly may result in a risk of fire or electric
shock.
Use and store the unit only in a clean and dry environment. Do not use and store in dusty and wet environment.
Check the unit prior to every use. Do not use the unit if it is damaged, broken.
Do not use the unit if the power cord is damaged or broken.
Keep the unit away from children. Do not let the children use the power supply unit.
Keep this product away from pets.
Do not use or store the unit in an area or environment with high temperature.
Should fluid from inside of the unit come in contact with your skin or clothing, wash the affected areas with tap water.
In a storm, unplug the power cord from the socket.
Make sure that the device you are connecting is switched off before you connect
WARNING-RISK OF EXPLOSIVE GASES.
To reduce risk of battery explosion, follow these instructions and those published by battery manufacturer of any equipment you intend to use in vicinity of the
battery.
Do not charge the unit via power supply system that operate outside of 100~240V.
Do not place the unit on its sides or upside down while in use or storage.
Do not use accessories for other use.
If rust, peculiar odors, overheating or other abnormal circumstance are observed, stop using the unit immediately and contact the dealer or our customer
- 11 -
Error icon
●
●
support.
The unit complies with all legal requirements for transport of dangerous goods.
Make sure that the unit is properly secured when transporting it in a motor vehicle.
Only charge, use and store the unit within an ambient temperature of 0 to 40℃(32~104℉).
Switch the unit off immediately if it has accidentally fallen, was dropped or was exposed to vibration.
Carefully read the instructions for the electric devices that you intend to connect to your power supply unit.

Q1: What devices can T300 power?
A: Please note that the AC output port can only charge/power devices that operate at less than total 300 Watt.
Q2: Can the T300 be charged while using?
A: Yes, T300 supports pass-through charging. But we don't suggest, it will cause damage to battery life.
Q3: How to know the working times for my device? Why does the duration of some devices deviate from the actual usage data?
A: Working time = 299Wh* 0.85/operating wattage of your device. The duration of our equipment is based on laboratory data, and the duration of specific
equipment usage may vary.
Q4: Does T300 include a built-in MPPT controller?
A: T300 power stations have a built-in MPPT controller.
Note: Storage instruction: fully charged every 3 months for best results and store it between -20 and 45 °C. Keep your portable power station away from heat and
direct sunlight in order to extend its life span.
Q5: Can it charge and discharge simultaneously?
Yes, but it is not recommended to charge and discharge at the same time in order to preserve battery lifespan.
Q6: How to extend the using time of CPAP?
Recommend to turn off its humidifier, heater, and set a lower pressure.
Q7: Can the AC output carry a refrigerator or air conditioner?
Workable for low power, and over 100W is not recommended. The starting power of refrigerators and air conditioners is generally 5~7 times higher than the rated
power, which easily triggers AC overload.
Q8: Can two power stations be used in parallel?
No.
If the product cannot charge or power other devices, please checking according to the following steps:
1.
2.
3.
4. ●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Do not disassemble, repair or modify the unit or the battery.
Do not place the unit close to or in a fire or expose it to the heat. Keep out of direct sunlight.
Do not charge, use or store the unit in a bathroom or in an area exposed to rain or moisture.
Only use the output socket to power external devices. Never connect the output to mains power under any circumstance.
Do not touch the unit or the plug-in points if your hands are wet.
Do not connect any metallic objects to the AC input or output.
Do not rub your eyes if fluids from inside the unit should get in your eyes.
Do not dispose the unit together with household waste.
Do not use any inappropriate power cords.
Do not operate the unit if it is not functioning correctly.
Do not move the unit if it is recharging or in use.
Do not put fingers or hands into the product.
Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or
risk of injury.
Do not disassemble the power pack, take it to a qualified service person when service or repair is needed. Incorrect reassembly may result in a risk of fire or electric
shock.
Use and store the unit only in a clean and dry environment. Do not use and store in dusty and wet environment.
Check the unit prior to every use. Do not use the unit if it is damaged, broken.
Do not use the unit if the power cord is damaged or broken.
Keep the unit away from children. Do not let the children use the power supply unit.
Keep this product away from pets.
Do not use or store the unit in an area or environment with high temperature.
Should fluid from inside of the unit come in contact with your skin or clothing, wash the affected areas with tap water.
In a storm, unplug the power cord from the socket.
Make sure that the device you are connecting is switched off before you connect
WARNING-RISK OF EXPLOSIVE GASES.
To reduce risk of battery explosion, follow these instructions and those published by battery manufacturer of any equipment you intend to use in vicinity of the
battery.
Do not charge the unit via power supply system that operate outside of 100~240V.
Do not place the unit on its sides or upside down while in use or storage.
Do not use accessories for other use.
If rust, peculiar odors, overheating or other abnormal circumstance are observed, stop using the unit immediately and contact the dealer or our customer
- 12 -
●
●
support.
The unit complies with all legal requirements for transport of dangerous goods.
Make sure that the unit is properly secured when transporting it in a motor vehicle.
Only charge, use and store the unit within an ambient temperature of 0 to 40℃(32~104℉).
Switch the unit off immediately if it has accidentally fallen, was dropped or was exposed to vibration.
Carefully read the instructions for the electric devices that you intend to connect to your power supply unit.

Q1: What devices can T300 power?
A: Please note that the AC output port can only charge/power devices that operate at less than total 300 Watt.
Q2: Can the T300 be charged while using?
A: Yes, T300 supports pass-through charging. But we don't suggest, it will cause damage to battery life.
Q3: How to know the working times for my device? Why does the duration of some devices deviate from the actual usage data?
A: Working time = 299Wh* 0.85/operating wattage of your device. The duration of our equipment is based on laboratory data, and the duration of specific
equipment usage may vary.
Q4: Does T300 include a built-in MPPT controller?
A: T300 power stations have a built-in MPPT controller.
Note: Storage instruction: fully charged every 3 months for best results and store it between -20 and 45 °C. Keep your portable power station away from heat and
direct sunlight in order to extend its life span.
Q5: Can it charge and discharge simultaneously?
Yes, but it is not recommended to charge and discharge at the same time in order to preserve battery lifespan.
Q6: How to extend the using time of CPAP?
Recommend to turn off its humidifier, heater, and set a lower pressure.
Q7: Can the AC output carry a refrigerator or air conditioner?
Workable for low power, and over 100W is not recommended. The starting power of refrigerators and air conditioners is generally 5~7 times higher than the rated
power, which easily triggers AC overload.
Q8: Can two power stations be used in parallel?
No.
If the product cannot charge or power other devices, please checking according to the following steps:
1.
2.
3.
4. ●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Do not disassemble, repair or modify the unit or the battery.
Do not place the unit close to or in a fire or expose it to the heat. Keep out of direct sunlight.
Do not charge, use or store the unit in a bathroom or in an area exposed to rain or moisture.
Only use the output socket to power external devices. Never connect the output to mains power under any circumstance.
Do not touch the unit or the plug-in points if your hands are wet.
Do not connect any metallic objects to the AC input or output.
Do not rub your eyes if fluids from inside the unit should get in your eyes.
Do not dispose the unit together with household waste.
Do not use any inappropriate power cords.
Do not operate the unit if it is not functioning correctly.
Do not move the unit if it is recharging or in use.
Do not put fingers or hands into the product.
Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or
risk of injury.
Do not disassemble the power pack, take it to a qualified service person when service or repair is needed. Incorrect reassembly may result in a risk of fire or electric
shock.
Use and store the unit only in a clean and dry environment. Do not use and store in dusty and wet environment.
Check the unit prior to every use. Do not use the unit if it is damaged, broken.
Do not use the unit if the power cord is damaged or broken.
Keep the unit away from children. Do not let the children use the power supply unit.
Keep this product away from pets.
Do not use or store the unit in an area or environment with high temperature.
Should fluid from inside of the unit come in contact with your skin or clothing, wash the affected areas with tap water.
In a storm, unplug the power cord from the socket.
Make sure that the device you are connecting is switched off before you connect
WARNING-RISK OF EXPLOSIVE GASES.
To reduce risk of battery explosion, follow these instructions and those published by battery manufacturer of any equipment you intend to use in vicinity of the
battery.
Do not charge the unit via power supply system that operate outside of 100~240V.
Do not place the unit on its sides or upside down while in use or storage.
Do not use accessories for other use.
If rust, peculiar odors, overheating or other abnormal circumstance are observed, stop using the unit immediately and contact the dealer or our customer
- 13 -
●
●
support.
The unit complies with all legal requirements for transport of dangerous goods.
Make sure that the unit is properly secured when transporting it in a motor vehicle.
Only charge, use and store the unit within an ambient temperature of 0 to 40℃(32~104℉).
Switch the unit off immediately if it has accidentally fallen, was dropped or was exposed to vibration.
Carefully read the instructions for the electric devices that you intend to connect to your power supply unit.

Gracias por elegir Fanttik!
Gracias por confiar en Fanttik Portable Power Station EVO300. Está diseñado como una fuente de alimentación de emergencia al aire libre con múltiples
puertos de salida para cargar la mayoría de sus dispositivos, incluidas computadoras portátiles, teléfonos, tabletas, drones, cámaras, máquinas CPAP, etc.
Contenido
1. DESCRIPCIÓN GENERAL DEL PRODUCTO
2. CONTENIDO DEL PAQUETE
3. PANTALLA DE VISUALIZACIÓN
4. LUZ DE DESTELLO LED
5. RECARGA
6. DISPOSITIVOS CARGABLES
7. MODOS DE CARGA
8. ESPECIFICACIONES
9. PREGUNTAS FRECUENTES
10. SOLUCIÓN DE PROBLEMAS
11. INSTRUCCIONES DE SEGURIDAD
- 14 -
15
16
17
18
18
19
20
22
22
23
24

1. DESCRIPCIÓN GENERAL DEL PRODUCTO
1.Pantalla de visualización
2.Botón de pantalla
3.Botón DC
4.Entrada 5V / 3A
5.PD 65W
6.Salida 12V / 10A
7.QC 3.0
8. Salida 12V / 10A (120W)
9.Salida 5V / 2.4A
10.Salida de CA
11.Botón AC
12.Manejar
13.Botón LED
14.Luz LED
15.Puerto Anderson
16.Entrada DC 7909
Vista Trasera
13
14
15
16
- 15 -
Front View
1
2
3
4
5
6
7 8 9 10
11
12

2. ONTENIDO DEL PAQUETE
Central eléctrica EVO300 x 1 Cable de carga de
cigarrillos de coche x 1
Cargador de pared de
CA x 1
Cable USB-C a USB-C x 1
Verifique cuidadosamente el contenido del paquete; si falta algo o está dañado, comuníquese con el servicio de atención al cliente en línea para obtener
asistencia.
- 16 -
Bolsa de accesorios x1 Manual de usuario x1 Guía de inicio rápido × 1

OUTPUT
TIME
TIME
Hrs
Hrs
INPUT
W
W
%
3. PANTALLA DE VISUALIZACIÓN
Output Power
Undercooling
Overheating
Error Alert Available Duration
DC/AC Indicator Light
Input Power Remaining
Charging Time
Real-time Power
●General View
●Descripción de pantalla
OUTPUT
TIME
TIME
Hrs
INPUT
W
W
%
Hrs
%
OUTPUT
TIME
TIME
INPUT
W
W
1.Pantalla de entrada de carga 2. Pantalla de entrada de carga (salida dual CC + CA) 3.Interruptor de pantalla
4.Pantalla de función AC 5.DC Pantalla de función 6.DC Clave + Pantalla Clave AC
OUTPUT
TIME
TIME
INPUT
W
W
%
%
OUTPUT
TIME
TIME
INPUT
W
W
- 17 -

4. LUZ DE DESTELLO DE LED
5. RECARGA
Para usar la luz de flash LED, simplemente presione el botón del interruptor LED para encenderla. Hay 3 modos de luz, incluido un modo SOS.
Varias opciones de entrada de DC son compatibles con la central eléctrica EVO300:
X1 Para activar el modo de luz baja (50% de la luminosidad máxima), presione el botón de luz LED una
vez cuando la luz esté apagada.
X2 Para activar el modo de luz alta (brillo máximo), presione el botón de luz LED dos veces seguidas
cuando la luz esté apagada.
X3 Para activar el modo de luz SOS, presione el botón de luz LED tres veces seguidas cuando la luz esté
apagada.
X4 Presione el botón de luz LED cuatro veces consecutivas para finalizar un ciclo y apagar la luz
nuevamente.
AC Adaptador Cargador de auto Panel Solar
- 18 -
Puerto USB-C (PD60W)