fanttik EVO300 User manual

材质:105g铜版纸
尺寸:91 x 135 mm
印刷:单黑
装订:骑马钉
注:封面背面不印刷

Model: EVO 300
Read this manual carefully before use keep it for future reference.
Portable Power Station EVO 300
User Manual


Contents
01~13
14~26
27~39
1. English
2. Español
3. Français
WARRANTY

Portable Power Station EVO 300
Thank you for choosing the Fanttik EVO 300 portable power station. This is an outdoor emergency power supply with multiple output ports that can charge
almost all your devices, including laptops, phones, tablets, drones, cameras, CPAP machines, and many more.
Contents
1. PRODUCT OVERVIEW
2. PACKAGE CONTENTS
3. DISPLAY SCREEN
4. LEDFLASHLIGHT
5. RECHARGING
6. CHARGEABLE DEVICES
7. CHARGING MODES
8. SPECIFICATIONS
9. FAQ
10. TROUBLESHOOTING
11. SAFETY INSTRUCTIONS
- 01 -
02
03
04
05
05
06
07
09
09
10
11

1. PRODUCT OVERVIEW
1. Display Screen
2. Display Button
3. DC Button
4. 5V/3A
5. PD 60W
6. 12V/10A Output
7. Quick Charge 3.0 Output
8. 12V/10A Output(120W)
9. 5V/2.4A Output
10. AC Output
11. AC Button
12. Handle
13. LED Button
14. Floodlight
15. Anderson Port
16. DC 7909 Input
FRONT VIEW BACK VIEW
13
14
15
16
- 02 -
1
2
3
4
5
6
7 8 9 10
11
12

2. PACKAGE CONTENTS
EVO 300 Power Station x 1 Vehicle Cigarette Lighter Cable x 1 AC Wall Charger x 1
User Manual x 1Accessory Bag x1
USB-C to USB-C Cable x 1
Carefully check the package contents. If anything is missing or damaged, please contact customer support for assistance.
- 03 -

3. DISPLAY SCREEN
Output Power
Temperature Too Low
Overheating
Error Alert Remaining Output Time
DC/ACIndicator Light
Input PowerRemaining
Charging Time
Real-time Power
Overview
Display Description
OUTPUT
TIME
TIME
Hrs
INPUT
W
W
%
OUTPUT
TIME
TIME
Hrs
Hrs
INPUT
W
W
%
Hrs
%
OUTPUT
TIME
TIME
INPUT
W
W
1. Charging Input 2. Charging Input (DC + AC Dual Output) 3. Fully Charged Standby
4. ACFunction 5. DC Function 6. DC Key + ACKey
OUTPUT
TIME
TIME
INPUT
W
W
%
%
OUTPUT
TIME
TIME
INPUT
W
W
- 04 -

4. LED LIGHTS
5. RECHARGING
To use the LED lights, simply press the LED switch button to turn it on. There are 3 light modes, including an SOS mode.
Multiple input options are available for the EVO 300 Power Station.:
X1 To activate the dimmed light (50% of maximum brightness), press the LED light button once when the light
is off.
X2 To activate the bright light (maximum brightness), press the LED light button twice in a row when the light is off.
X3 To activate the SOS light, press the LED light button three times in a row when the light is off.
X4 Press the LED light button four times consecutively to finish a cycle and turn off the light again.
AC Adaptor Car Charger Solar Panel USB-C Port (60W PD)
- 05 -

6. CHARGING DEVICES
EVO 300 is a versatile product with a wide variety of ports, and is compatible with a range of devices. Note that it cannot support appliances rated over 300W.
Laptops
Cameras
Tablets
Smartphones
Drones Mini-fridges
USB Port: Smartphones, tablets, smartwatches, digital cameras, e-readers, and more.
DC Output (12V): Drones, routers, mini-fridges, and more.
AC Power: Laptops, displays, electrical appliances, and more.
- 06 -

7. CHARGING MODES
It is highly recommended to fully charge EVO 300 before using it to charge other devices. To charge the EVO 300 power station, you can use a wall charger,
car charger, or solar panel. It may take 2.5 hours to reach a full charge using the included wall charger. The charging speed when using solar panels is
affected by the weather and cloud coverage.
Note: Please charge the product before use.
Charging with Solar Panels (not included)
1.
2.
3.
Note:
(1)
(2)
(3)
Charging with an AC Wall Charger
Choose a suitable solar panel (DC12~30V/120W)
Solar panels will perform better in open south-facing locations that get direct sunlight. Simply connect the solar panel to your EVO 300 power station to
start charging.
When the power station is fully charged, it will stop charging automatically.
It is recommended you charge the power station between 0 to 40°C.
Charging times vary depending on the intensity of solar light.
Make sure that the positive and negative poles of the solar panel are connected correctly.
- 07 -

1.
2.
Note:
(1)
1.
2.
Note:
(1)
1.
2.
Plug the product into socket via the AC wall charger.
Please unplug the charger when recharging is finished.
It is normal for this product to get warm during charging.
Charging Using a Car Charger (with the engine running)
Connect the product and the Cigarette Lighter Socket via the Cigarette Lighter Cable.
After starting the engine, the power station will charge.
It's important to be aware that it's not possible to fully charge the power station using a 12V car battery. However, a 24V battery is able to fully charge it.
Charging using the USB-C Port (60W PD)
Prepare a USB-C power adapter (not included).
Connect the USB-C adapter to the USB-C port on the power station using the provided USB-C to USB-C cable.
- 08 -

8. SPECIFICATIONS
9. FAQ
Model
Capacity
USB-C-1
USB-C-2
USB-1
USB-2
Battery
Frequency
Solar Charger
Weight
EVO 300
299.52Wh (83,200mAh)
60W PD
5V/3A
5V/2.4A
18W Quick Charge 3.0
Lithium-ion
60Hz
MPPT 12-30V
8.8lbs
Q1: What can I power using the AC port?
A: The AC port can power AC appliances rated under 300W.
Q2: Can EVO 300 be recharged while it is charging something else?
A: Yes, EVO 300 supports pass-through charging. However, doing this may cause some damage to the battery.
Q3: How to calculate the length of time my device can be powered?
A: The working time is calculated as follows: 299.52Wh multiplied by 0.85, divided by the operating wattage of your device. This may vary depending on specific
circumstances.
Q4: Does EVO 300 include a built-in MPPT controller?
- 09 -

10. TROUBLESHOOTING
A: Yes, EVO 300 power stations have a built-in MPPT controller.
Storage instruction: fully charge every 3 months for best results and store it between -20 and 45 °C. Keep your portable power station away from heat and
direct sunlight in order to extend its life span.
Q5: Is there a way to extend the operating time of a CPAP?
A: You can turn off the humidifier, the heater, and use a lower pressure.
Q6: Can the AC port power a fridge or air conditioner?
A: It might be possible, but on low power settings and not for an appliance rated over 100W. The power needed to start a fridge or air conditioner is generally 5 to 7
times its rated power, which could easily trigger an AC overload.
Q7: Can two power stations be used in parallel?
A: No.
If the product cannot charge or power other devices, please check through the following steps:
1.
2.
3.
4.
Make sure the power button is switched on.
Make sure the AC and DC power buttons are both on.
Check the battery capacity. If it is lower than 10%, charge the power station.
Make sure the connected power load does not exceed the limit of EVO 300. Each port has its own limit.
- 10 -

11. SAFETY INSTRUCTIONS
Error code (Output)
E1
E2
E3
E4
E11
E12
E13
E14
E15
E16
E17
E18
Cause
Over-temperature protection
Low temperature protection
Battery over-voltage
Input over-voltage
Discharge Over-temperature
Discharge low temperature
USB-A/USB-C input over-current or short-circuit
QC input over-current or short-circuit
Power supply reversed
DC 12V input or short-circuit
AC 110V input or short-circuit
Total power output overloaded
Solution
Auto Recover/unplug all charging devices
Auto Recover/unplug all charging devices
Auto Recover
Auto Recover
Auto Recover
Auto Recover
Recover by pressing the DC button
Recover by pressing the DC button
Recover by pressing the DC button
Recover by pressing the DC button
Recover by pressing the DC button
Recover by pressing the DC button
IMPORTANT
Failing to follow the advice below could result in serious injury or even death.
Do not disassemble, repair or modify the unit or the battery.
Do not place the unit near or in fire, or expose it to heat. Keep out of direct sunlight.
Do not charge, use or store the unit in a bathroom or in an area exposed to rain or moisture.
Only use the output socket to power external devices. Never connect the output to mains power under any circumstance.
- 11 -
Error icon

Do not touch the unit or the plug-in points if your hands are wet.
Do not connect any metallic objects to the AC input or output.
Do not rub your eyes if fluids from inside the unit should get in your eyes.
Do not dispose of the unit together with household waste.
Do not use any incompatible power cords.
Do not operate the unit if it is not functioning correctly.
Do not move the unit if it is recharging or in use.
Do not put fingers or hands into the product.
Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or
risk of injury.
Do not disassemble the power pack. Take it to a qualified service person when service or repair is needed. Incorrect reassemblymay result in a risk of fire or electric
shock.
Use and store the unit only in a clean and dry environment. Do not use and store in a dusty or wet environment.
Check the unit prior to every use. Do not use the unit if it is damaged or broken.
Do not use the unit if the power cord is damaged or broken.
Keep the unit away from children. Do not let children use the power supply unit.
Keep this product away from pets.
Do not use or store the unit in an area or environment with high temperatures.
Should fluid from inside of the unit come in contact with your skin or clothing, wash the affected areas with tap water.
In a storm, unplug the power cord from the socket.
Make sure that the device you are connecting is switched off before you connect
WARNING-RISK OF EXPLOSIVE GASES.
To reduce risk of battery explosion, follow these instructions and those published by battery manufacturer of any equipment you intend to use in vicinity of the
battery.
Do not charge the unit via a power supply that is outside of 100 to 240V.
Do not place the unit on its side or upside down while in use or storage.
Do not use accessories for other uses.
If rust, unusual smells, overheating or other abnormal circumstances are observed, stop using the unit immediately and contact the dealer or our customer
- 12 -

- 13 -
support.
The unit complies with all legal requirements for the transport of dangerous goods.
Make sure that the unit is properly secured when transporting it in a motor vehicle.
Only charge, use and store the unit within an ambient temperature of 0 to 40°C (32~104°F).
Switch the unit off immediately if it has accidentally fallen, was dropped or was exposed to vibration.
Carefully read the instructions for the electric devices that you intend to connect to your power supply unit.

Gracias por elegir Fanttik!
Gracias por confiar en Fanttik Generador Solar Portátil EVO 300. Está diseñado como una fuente de alimentación de emergencia al aire libre con múltiples
puertos de salida para cargar la mayoría de sus dispositivos, incluidas computadoras portátiles, teléfonos, tabletas, drones, cámaras, máquinas CPAP, etc.
Contenido
1. DESCRIPCIÓN GENERAL DEL PRODUCTO
2. CONTENIDO DEL PAQUETE
3. PANTALLA DE VISUALIZACIÓN
4. LUZ DE DESTELLO LED
5. RECARGA
6. DISPOSITIVOS CARGABLES
7. MODOS DE CARGA
8. ESPECIFICACIONES
9. PREGUNTAS FRECUENTES
10. SOLUCIÓN DE PROBLEMAS
11. INSTRUCCIONES DE SEGURIDAD
- 14 -
15
16
17
18
18
19
20
22
22
23
24

1. DESCRIPCIÓN GENERAL DEL PRODUCTO
1. Pantalla de visualización
2. Botón de pantalla
3. Botón DC
4. 5V / 3A
5. PD 65W
6. Salida 12V / 10A
7. QC 3.0
8. Salida 12V / 10A (120W)
9. Salida 5V / 2.4A
10. Salida de CA
11. Botón AC
12. Manejar
13. Botón LED
14. Luz LED
15. Puerto Anderson
16. Entrada DC 7909
Panel Trasero
13
14
15
16
- 15 -
Panel Frontal
1
2
3
4
5
6
7 8 9 10
11
12

2. CONTENIDO DEL PAQUETE
Generador Solar Portátil
EVO 300 x 1
Cable de carga de
cigarrillos de coche x 1
Cargador de pared de
CA x 1
Cable USB-C a USB-C x 1
Verifique cuidadosamente el contenido del paquete; si falta algo o está dañado, comuníquese con el servicio de atención al cliente en línea para obtener
asistencia.
- 16 -
Bolsa de accesorios x1 Manual de usuario x1
Other manuals for EVO300
1
Table of contents
Languages:
Other fanttik Power Supply manuals