feather&black Casterton User manual

feather&black
Casterton Bed - Assembly Instruction
Product size
If you require any advice during assembly,please call our customer service team on
01243 380600
Please retain these assembly instructions for future use
Produced in Viet Nam for Feather&Black www.featherandblack.com
1
King: H120 x L214.5 x W161 cm
Super King: H120 x L214.5 x W192 cm
Double: H120 x L204.5 x W147 cm

feather&black
Thank you for purchasing this Casterton Bed.
Produced in Viet Nam for Feather&Black www.featherandblack.com
2
Before you start
Please read these instructions fully prior to
assembly to familiarise yourself with the various
stages of construction. Carefully open all packs
supplied and check the contents against the parts
and fittings check list.
Do not destroy any of the packaging until you are
certain that you have all the necessary parts for the
assembly.
This item is heavy once assembled. Please try to
assemble the item as close as possible to the point
of use. Take care when moving the item to avoid
personal injury or damage to the product and
always lift rather than drag.
There are small components used in the
construction of this furniture as well as plastic
packaging, these should be kept away from young
children whilst assembling.
Product Safety
All assembly fastenings should always be
tightened properly, and care should be taken to
ensure that no fittings are loose.
Periodically check and ensure that all components
are in their proper position, free from damage, and
that all connectors are tight.
Please note depending on the lighting, positioning
and surroundings of your room, the shade of the
colour can sometimes appear slightly different.
Over a period of time the colour might lighten or
fade slightly due to light exposure.
Product Care
To clean, slightly moisten cloth with water and
wipe surfaces. A damp cloth holds dust and
prevents damage. repeat with a dry, soft,
lint-freecloth. Do not use abrasives or cleaning
products which may contain ammonia or solvents.
Number of people required to assemble
One people to assemble the product and
two people to lift in to position.
Time to assemble
1/2 Hour
Necessary tools
Missing parts or faulty products
If you are missing any fixtures or
fittings during assembly, or a part is
unfortunately faultyplease call our
customer service team on
01243380600
Casterton Bed - Assembly Instruction

feather&black
Components supplied (not actual size)
Produced in Viet Nam for Feather&Black www.featherandblack.com
3
(1) : Headboard
(2) : Footboard
Qty : x 1 pc
Qty : x 1 pc
1
2
3
3
4
44
4
(3) : Side Rail Qty : x 2 pcs
(4) : Legs Qty : x 4 pcs
Casterton Bed - Assembly Instruction

(A) : Allen Bolt (C) : Allen Key
Qty : x 4
Qty : x 2
feather&black
Fixtures and fittings supplied (not actual size)
Produced in Viet Nam for Feather&Black www.featherandblack.com
4
10mm 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180
M6x35mm
(D) : Flat Washer
Qty : x 4
Ø18xØ6x 1mm
(B) : Allen Cap Nut
Qty : x 4
M6
Casterton Bed - Assembly Instruction

BOLT
C
feather&black
Step 1: Screw in the bolt mounted on the
legs (4) on to Headboard (1) and Footboard (2)
Produced in Viet Nam for Feather&Black www.featherandblack.com
5
4
4
44
4
3
3
2
1
Step 2: Use bolt ( Mounted on
the headboard and footboard)
to fix the Side Rail (3) on to
Headboard (1) and Footboard
(2) by using Allen Key (C).
Casterton Bed - Assembly Instruction

SLAT FRAME
LEG
BOLT
NOTE : SPRUNG SLATS
SUPPLY SEPAR ATELY
(1) Use The bolt to fit support
leg on to the slat frame.
Please note that these bolts are
to be found inside the slat frame
box.
(2) Carefully locate the slats on
to the unit.
(3) Use bolt (A) and JCN nut
(B) to fit the unit using Allen
Key (C)
feather&black
Step 3:
Produced in Viet Nam for Feather&Black www.featherandblack.com
6
C
C
D
B
A
Casterton Bed - Assembly Instruction