feather&black Double User manual

Assembly Instructions
1. We suggest you spend a short time reading through this leaflet and then follow
the simple step by step instructions.
2. If you follow the instructions carefully the end result should be worth the effort.
3. Do not discard any of the packaging until you have checked that you have all
finger tightened during initial assembly. Only upon completion of the assembly
should all fixing points be fully tightened.
6. We recommend a periodic check on all fixing points to make sure they remain
fully tightened.
7. Keep glue and fittings out of children’s reach.
the unlikely event that this product has missing or damaged parts, please call
0344 292 0000 to obtain spares
spare
Before you
Start, here
are some
helpful
advices.
the parts and the pack of fittings.
4. Assemble on a carpet if possible.
5. To ensure an easier assembly, we strongly advise that all fittings are only
Bed - Double, King & Superking
Padstow
Page 1 of 4

Allen Key M4 x 2pcs
PARTS Fittings
NO. PART LIST QTY
(1) Headboard
A
B
D
C
3
01
(2) Footboard 01
(3) Side Rails 02
M6×45mm x 4pcs
M6 × 4pcs
Metal washer x 4pcs
1
3
2
3
Page 2 of 4

ASSEMBLY
(2) by using Allen Key (C).
- Use bolt (mounted on the
headboard and footboard) to
1
3
2
Bolt
3
C
Page 3 of 4
fix the Side Rail (3) onto
Headboard (1) and Footboard

ASSEMBLY
(1) Use the bolt to fix support
Please note that these bolts
are to be found inside the slat
frame box.
(2) Carefully locate the slats
onto the unit.
(3) Use bolt (A) and JCN nut
(B) to fix the unit using Allen
Key (C).
NOTE: SPRUNG SLATS
SUPPLY SEPAR ATELY
Page 4of 4
leg onto the slat frame.
SPRUNG SLATS