JONATHAN ADLER Jacques 2 Tier Table User manual

JONATHAN ADLER ENTERPRISES • 333 HUDSON STREET 7TH FLOOR NY, NY 10013 • T. 212.645.2802 F. 212.645.3072 • jonathanad er.com
F URNIT URE
Jacques 2 Tier Table
Assembly Instruction
•For ease of assembly two people are recommended.
Parts Included:
Box 1:
•(1pc) Left Side Panel – A
•(6pcs) Lucite bars –B
•(1pc) Right Side Panel –C
•(3pcs) Clear Tempered Glass Shelf –D
Hardware Enclosed:
○
1
1/4”-20Tx15mmL
12pcs
○
2
Allen Wrench
1pc
○
3
Rubber Pads
12pcs

JONATHAN ADLER ENTERPRISES • 333 HUDSON STREET 7TH FLOOR NY, NY 10013 • T. 212.645.2802 F. 212.645.3072 • jonathanad er.com
Assembly Instructions:
1. Remove all the components from their boxes and place them on a carpeted or scratch-free
surface. Place the Left Side Panel (A) at the ground and then insert Lucite Bar (B) into the
corresponding hole.
2. Attach Left Side Panel (A) to Lucite Bar (B) and secure with the Screws ① using the
enclosed Allen Key ② .
3. Attach Right Side Panel (C) to Left Side Panel (A) and secure with Small Screws ① using
the enclosed Allen Key ② .

JONATHAN ADLER ENTERPRISES • 333 HUDSON STREET 7TH FLOOR NY, NY 10013 • T. 212.645.2802 F. 212.645.3072 • jonathanad er.com
4. Flip the shelf unit in 90 degree and attach each Rubber Pads ③ at the corner of the
shelf unit and then carefully place the Tempered Glass shelf (D) on top of Rubber Pads ③ .
5. Assembly is complete.