Tommy Hilfiger ODSO10004A User manual

Loveseat

3
Information
CUSTOMER SERVICE
Our primary objective is to provide fast, friendly customer service to all of our cus-
tomers.We are here to help if you have any questions, comments, or are in need of
warranty replacement parts.
Please call us toll free at: 1-855-372-2315 (U.S.)
Monday - Friday 6:00am - 5:00pm P.S.T.
0-800-051-6775 (U.K.)
Monday - Friday 2:00pm - 1:00am U.K. Time
Or visit our website:
www.truecustomersupport.com
FAILURE TO FOLLOW THESE WARNINGS WHEN IN USE COULD RESULT IN
INJURY
• Do not stand on the item or use as a step ladder.
• Do not use this item unless all bolts and screws are firmly secured.
• Check all bolts and screws every 90 days.Tighten if any are loose.
•Please lift up then move. Pushing over ordragging this product can result in an
injury or causedamage to the floor and furniture piece.

4
Part List
5. 6. A.
Seat cushion (1) Back cushion (1) Thumb bolt (5)
M8x40
1. 2. 3. 4.
Left arm (1) Seat frame (1) Right arm (1) Back frame (1)

5
1. 1.Remove all parts from the carton and place them on a
protected surface or carpet.
2. Ensure all parts match to the parts list on this.
1
2
43

6
2. Attached Seat frame (2) to the Left arm (1) by sliding receivers
into the mechanism pasts located on sides of Left arm (1) press
down on sides of Left arm (1) press down on Seat frame (2) to
firmly secure.
1
2

7
3. Attached Seat frame (2) to the Right arm (3) by sliding receivers
into the mechanism pasts located on sides of Right arm (3) press
down on sides of Right arm (3) press down on Seat frame (2) to
firmly secure.
1
3
2

8
4.
Attached Back frame (4) to the Arms (1) (3) by sliding receivers
into the mechanism pasts located on sides of Arms (1) (3) press
down on sides of Arms (1) (3) press down on Back frame (4) to
firmly secure.
1
2
3
4

9
5.
A
Turn the Arm Chair 90 degrees, first screw 1 Thumb bolts
(A) into hole located on central of Seat frame and Back
frame to secure tightly, then Screw 2 Thumb bolts into
holes located on front of Seat frame and Arms to secure
tightly, Screw other 2 Thumb bolts (A) into holes located
on Back frame and Arms to secure tightly.

10
6. Place cushions (5) and (6) as shown.
5
6

11
Product Dimension

12